Set or Disable Security Code on the GOTRAX G4 Electric Scooter

Поделиться
HTML-код
  • Опубликовано: 9 ноя 2024

Комментарии • 120

  • @gsell6619
    @gsell6619 2 месяца назад +3

    maybe went through 7 different videos and this was the only one with all the information, thx 🙏🏼

  • @kevtrevtuff11
    @kevtrevtuff11 10 месяцев назад +2

    Worked for me!! Thanks. Its after u enter the password and scooter is ready. Then hold minus button with power button until u hear beep. If that doesnt work then hold plus button with power button for 10 seconds till u hear a beep. Took me a few tries but then it worked! On 2 diff G4s

  • @JTme423
    @JTme423 3 года назад +5

    l followed the manual in order to set the code and it made me crazy for a half hour until I found your video! Thanks!

    • @yellowleaf28
      @yellowleaf28 11 месяцев назад +1

      the manual has incorrect instructions, this dude's video is the only thing that helped

  • @dianaverhulst3407
    @dianaverhulst3407 5 месяцев назад

    OK so I've had mine for a few months - love it - I disabled the code right off the bat, but now I"m going to be attending college (again), and want to use it to motor about. I tried pressing Power plus -- for 10 secs -- nothing. Will now try Power + to see if I can enable it like you said... BRB.....

  • @dlopezunion
    @dlopezunion 3 года назад +7

    Thanks to you i was able to unlock my scooter👏🏻👏🏻

  • @buffyvampire7814
    @buffyvampire7814 10 месяцев назад +2

    Its so hard to get the tires for the gotrek motor scooter. Took me over a year to get it from the company they was always out of stock. Finally i was able to come winter time

  • @sveren
    @sveren Год назад

    Thanks so much! I lost the manual to my Gotrax and this helped me a lot

  • @paulwright8378
    @paulwright8378 11 месяцев назад +1

    Finally I got it figured out,thanks dude 🎉

  • @BugattiLo_
    @BugattiLo_ 5 месяцев назад +1

    Shout out to you bro because I had no clue wtf to do

  • @buffyvampire7814
    @buffyvampire7814 10 месяцев назад +1

    Thank you just got ours and hate the code

  • @RedMartyr
    @RedMartyr 4 месяца назад +1

    thanks !! I found out if i hold the minus button for 10 seconds it switches from miles to kilometres

  • @mixtstevo7632
    @mixtstevo7632 Год назад +1

    Thanks for the help, great video. Also any tips on how to make the battery last longer of its even possible, like is there any batteries i could by to replace it in the middle of a long ride ? Ik weird question.

    • @keenanjeff
      @keenanjeff  Год назад +1

      The best thing you can do to extend range is to give a few kicks every time you start and on big hills where the scooter slows this takes the load off the battery / motor and is really easy way to get the most miles from a charge.

  • @Dhampir1987
    @Dhampir1987 Год назад +2

    You are a life saver, thank you!

  • @JulianCantu-et7bt
    @JulianCantu-et7bt 10 месяцев назад +1

    Thank you work perfectly.

  • @YouTubeSlobsOnDaNob
    @YouTubeSlobsOnDaNob Год назад +1

    I just got one the other day... should have seen me struggling. 🤣 the light kept blinking on and off cause I had no idea what I was doing.

    • @keenanjeff
      @keenanjeff  Год назад

      People be like why do you need 1.4Gbps on a phone and I say it makes everything that much snappier

  • @danieldinicola4605
    @danieldinicola4605 6 месяцев назад +3

    It is amazing that when GoTrax sends you this thing and they never tell you to use the factory code to open the damn thing.

    • @keenanjeff
      @keenanjeff  6 месяцев назад

      I can tell you the factory code it is 000 :-)

  • @Internetdev
    @Internetdev 5 месяцев назад

    If tou try ti plug the transfo when the Goytrax (Wispeef too) is on, that's initiialize the scooter. (for me it works)

  • @EchoVids2u
    @EchoVids2u 2 года назад +1

    Thank you Jeff!
    I love my g4.

  • @robertmotion
    @robertmotion 2 года назад

    Great video.
    Question. My battery indicator light is blinking and my scooter won't power off. im gonna replace the battery but shouldn't I be able to still power off scooter holding power button? or is this some kinda default safety feature to keep from damaging scooter?
    confused in Brooklyn.
    /👑

    • @keenanjeff
      @keenanjeff  2 года назад

      Hold the power button until it turns off maybe 30 seconds. If it still does not power off plug in charger and see if it will charge. Once it stops flashing try to power off again.

  • @ptn1992
    @ptn1992 5 месяцев назад +1

    As of June 2024, the manual included does tell you the default security code: 000
    But the procedure for changing the code doesn’t seem to work. I’ve tried the “-“ & “power” buttons for 10 seconds, I’ve tried the “+” & “power” buttons for 10 seconds. Neither gets me into the change mode.
    I can disable the code and re-enable the code, but I can’t seem to change the code. Not to complain about your video, because it’s great, but you didn’t actually change the code. You enter change mode, but never change the code. I can do that too, but I can never get it to acknowledge a new code.
    Can you record a clip showing the code change and then unlocking with the new code ?
    That would be great, thanks.

  • @MontelWhiting-n9y
    @MontelWhiting-n9y Год назад +1

    How can I fix my cruise control on my G4

  • @MaoRecords
    @MaoRecords 2 года назад

    Do you happen to know if there is a way to disable/reenable front headlights? I believe I disabled it because my front headlights don't work after I initially set it up. I just got this today!

    • @keenanjeff
      @keenanjeff  2 года назад

      Hold “+” button for 3 seconds to power the headlight and tail light power on and off. I have not found a way to disable the headlight. maybe remove the tiller and reinstall checking the connections.

  • @brycejames2127
    @brycejames2127 2 года назад +1

    Thanks for the tip ! I unlocked mine permanently too ! 👍😁 love my G4!

  • @Michael-b4c7y
    @Michael-b4c7y Месяц назад

    Hi there do you know how to disable on g5?

    • @keenanjeff
      @keenanjeff  Месяц назад

      yes press the power button 6 times
      from page 10 in the manual cdn.shopify.com/s/files/1/0071/0406/9747/files/ReducedG5_ManualSize-compressed.pdf?v=1678901261

  • @gunnar2300
    @gunnar2300 2 года назад

    thanks for help with the code. how do you

  • @tonylozzi5686
    @tonylozzi5686 2 года назад +5

    I’m trying to reset the passcode, but this video keeps popping up. Anyone have info on how to do this. FYI: in The beginning of this video you say to enter code and then hit the plus button twice to activate the scooter. It’s a little confusing because it’s the power button you press twice

    • @thisaintit9344
      @thisaintit9344 Год назад

      The default code should b 000 then tap da turn on duutton 2 times

  • @bricesewell5289
    @bricesewell5289 Год назад +1

    So helpful

  • @travanwadkins5289
    @travanwadkins5289 7 месяцев назад

    So I forgot my passcode cause I haven’t used my scooter for about a year, will this reset it back to normal?? Thanks for helping

    • @keenanjeff
      @keenanjeff  7 месяцев назад

      No you need to know the code contact gotrax support

    • @travanwadkins5289
      @travanwadkins5289 6 месяцев назад +1

      @@keenanjeff that’s actually incorrect, I’m confused and not sure what your talking about in the video since it’s not really unlocking the scooter. I found ONE video on RUclips pertaining to my question. Reset button is under the electronic devise at the top. Unscrew and it sets password back to 000. It WORKED absolutely perfectly. Reset button completely allows you to do whatever

    • @keenanjeff
      @keenanjeff  6 месяцев назад

      Great info for anyone that forgot the code try this.

  • @LoretaMichelena
    @LoretaMichelena 2 года назад +1

    Can you do a video changing the anti-thief code or maybe you could help me with that because I couldn't change it :( BTW thank you for the video finally I can set my own code!

    • @keenanjeff
      @keenanjeff  2 года назад

      here you go ruclips.net/video/-e7-V0b75Ok/видео.html

  • @DreeDontCare
    @DreeDontCare 17 дней назад

    What about the g6

  • @ryanpjk-sproule3813
    @ryanpjk-sproule3813 3 года назад +1

    Good job dude I was going to do the same thing I actually did post a video of this! It is one of the best or now known to be the top-rated scooter under $1,000! Even beating out the ninebot Max and xiaomi I've driven and have both! And compared and this new seafloor is blows it out of the water stay safe ride safe God bless#awareness

  • @gunnar2300
    @gunnar2300 2 года назад

    How do you disable cruise control? thanks

  • @KONGMYANG89
    @KONGMYANG89 Год назад

    If I don’t know the code can I still be able to disable it by doing holding the + and power buttons

    • @keenanjeff
      @keenanjeff  Год назад

      No i think that would defeat the purpose

    • @paulwright8378
      @paulwright8378 11 месяцев назад

      Theirs a reset button under the lcd press it for 5 seconds then double click the on off switch

  • @damarielove6466
    @damarielove6466 Год назад

    Do you know how to enable the code after deactivating it?

  • @cottojn
    @cottojn 2 года назад

    How do you active to have the code

  • @paulwright8378
    @paulwright8378 11 месяцев назад

    What do you do if you bought one second hand and don't know the code

    • @keenanjeff
      @keenanjeff  11 месяцев назад

      I think you are out of luck

    • @paulwright8378
      @paulwright8378 11 месяцев назад +1

      ​@@keenanjeffit's OK,theirs a reset switch under the lcd panel

  • @carlosluna-mejia1267
    @carlosluna-mejia1267 6 месяцев назад +1

    I have no idea what the factory code is. Thank you for showing me the factory code!!!! 000

  • @peneloqueen1424
    @peneloqueen1424 2 года назад

    And as if I do not remember the password, did that work for me the same?

    • @keenanjeff
      @keenanjeff  2 года назад +1

      If you changed the code you need to remember

  • @johnphilpott3687
    @johnphilpott3687 11 месяцев назад

    Anyone know how to remove speed limiter on Carrera is2?

  • @jorgeglez2972
    @jorgeglez2972 Год назад +1

    i have a g3 and it recites the miles when it gets to 25 miles...it goes back to zero

  • @Chamba33..
    @Chamba33.. 2 года назад +1

    How do I turn the password back on after disabled it

    • @keenanjeff
      @keenanjeff  2 года назад

      It is in the video

    • @Chamba33..
      @Chamba33.. 2 года назад +1

      @@keenanjeff then it didn’t work

  • @jackhegarty1486
    @jackhegarty1486 Год назад

    Hey mate mine just keeps on beeping and won’t let me ride it even tho the password is correct and unlocks?

    • @keenanjeff
      @keenanjeff  Год назад +1

      Mine has done that on a couple of occasions but turning it on and off a gain fixes it. I have my code disabled for the most part I don't let it out of my sight or use the cable lock.

    • @WaelSlami-o6h
      @WaelSlami-o6h 2 месяца назад

      Hello, I want help in knowing the scooter password
      Go wheel ex power

  • @montelwhiting1647
    @montelwhiting1647 Год назад

    My electric scooter beeping is stopped so many times I cannot ridei it how can I fix it

  • @harpersearing9115
    @harpersearing9115 Год назад +3

    This didn’t work.

  • @yellowleaf28
    @yellowleaf28 Год назад

    He said click the plus button twice when he meant the power button twice to lock in your code

  • @TheRealElectricOutdoors
    @TheRealElectricOutdoors 2 года назад

    is there anyway to tke the limiter off the g3/g4?

  • @milkpie2437
    @milkpie2437 Год назад

    How do you reset a code!!!!!!!

  • @yellowleaf28
    @yellowleaf28 Год назад

    Mine doesn’t lock with the double click

  • @joaovicentejunior2942
    @joaovicentejunior2942 2 года назад

    Hey gotrax G4 here, my scooter continues to beep after being unlocked and won’t accelerate. I can unlock but start a continuous beeping and don't run.

    • @keenanjeff
      @keenanjeff  2 года назад

      beeping means it is still locked maybe the code is wrong.

    • @enemyflyingtonk2721
      @enemyflyingtonk2721 2 года назад

      check the motor cable

    • @Goberge
      @Goberge 2 года назад

      It means your back motor is disconnected

    • @enemyflyingtonk2721
      @enemyflyingtonk2721 2 года назад

      @@Goberge I was replacing a tire on it and it started to beep and i heard the beeping lol

    • @jackhegarty1486
      @jackhegarty1486 Год назад

      I have the same issue. Brand new
      Don’t believe it’s the back motor

  • @cerenademe9433
    @cerenademe9433 2 года назад

    Now that the code is set, how do you use it to start the scooter? I've let mine sit for months - almost a year - I can't remember, and the manual is $hit! :(

    • @keenanjeff
      @keenanjeff  2 года назад

      Just enter the code with the plus minus and power button to move to the next digit

    • @cerenademe9433
      @cerenademe9433 2 года назад

      @@keenanjeff Hey - thanks for the quick reply! ......So, I did that. Then what? I must either have the PIN wrong or it's not working. Don't you just hit the power button twice once the PIN is set? Mine is not unlocking. I have emailed Gotrax to see if there's a way to reset it. Not especially hopeful on that. If I can't get this to work I'll be super upset. $650 is a lot to throw away :'(
      EDIT: Ah - I figured it out! I had the PIN wrong. Man - I am putting that in my password manager right now! (I thought I did before but I hadn't!). Thanks again for your help!!

    • @keenanjeff
      @keenanjeff  2 года назад

      @@cerenademe9433 try 0000 it is the default code

    • @cerenademe9433
      @cerenademe9433 2 года назад

      @@keenanjeff No - I got it. It's the 3-digit code on the LCD, not the 4 number code for the cable lock. Saved it in my password manager (which I should've done before!). Thanks!

  • @ryanpjk-sproule3813
    @ryanpjk-sproule3813 3 года назад +1

    We have almost SAME miles to jaja

    • @keenanjeff
      @keenanjeff  3 года назад

      Better check the brake pads had to do mine check the other new video

    • @ryanpjk-sproule3813
      @ryanpjk-sproule3813 3 года назад

      @@keenanjeff I did and have thx mate... have a shop here in my city that's directed with gotrax and factory all OVER WORLD and ..help me as I have also the xiomi clone and had ninebot max and THIS G4 is by far better than those and my top level 9ne day for weekend agression speed relieving etc is mantis or dual ped or appolo etc... but yes this G4 HAS the options and capabilities for DUAL BRAKE handles etc as the spots are already cut out and places put in for wiring it CAN he done I know some1 who has it in THIS G4 and it's on you TUBE here also...they DIDA THE hard work ALREADY just need a cable and handle I'm going to ask my shop to do this..... god bless and #awareness #teamworkmakesthedreamwork #REDEMPTION #faith #family #forgiveness #endcruetly #xtremesportstherapy

    • @jeffreywu7241
      @jeffreywu7241 2 года назад

      @@keenanjeff hello sir , i got a problem with my g4 how to i change it from km to miles like your?

  • @alexkastano96
    @alexkastano96 2 года назад +2

    nothing works

  • @sideshowdrummer
    @sideshowdrummer Год назад

    So what you're saying is hold all three buttons at the same time for 10 seconds

  • @danhorner9908
    @danhorner9908 Год назад +1

    Why does this look just like the carerra is impel scooter ?

    • @keenanjeff
      @keenanjeff  Год назад +1

      Gotrax probably makes it for them

    • @danhorner9908
      @danhorner9908 Год назад +1

      @@keenanjeff I looked at the price for the grotax 4 it's identical in every way to the carerra but the grotax is £150 cheaper so is it just a knock off carerra then ? Even the spare parts look identical which is handy because can't get carerra parts anywhere

  • @ianmcnab8751
    @ianmcnab8751 2 года назад

    When I hold + and power for 10 seconds, it does nothing. Also, why is your display flashing? Only the number I am on is flashing

    • @enemyflyingtonk2721
      @enemyflyingtonk2721 2 года назад

      It’s not it’s just the camera making it look like that

  • @queencrafty5475
    @queencrafty5475 2 года назад

    thanks i changed the password so my brother couldn't use it.

  • @kaushalsolanki3531
    @kaushalsolanki3531 2 года назад

    Do you know how to reset the distance meter

    • @keenanjeff
      @keenanjeff  2 года назад

      No it looks like it is a lifetime meter whoever gets the most miles wins.

  • @kennethangus8813
    @kennethangus8813 Год назад

    I want to set my ml reader to OOO

    • @keenanjeff
      @keenanjeff  Год назад +1

      you can not reset it is a lifetime counter

    • @kennethangus8813
      @kennethangus8813 Год назад

      @@keenanjeff thanks for feed back I respect that

  • @Avid-DAvid-D
    @Avid-DAvid-D Год назад

    Its not working that way to recode thstv way another thing i cut the security lead because he used to run in to it

  • @sideshowdrummer
    @sideshowdrummer 2 года назад

    So I have one it's Kick-Ass scooter I just want to know how many times you could charge it before you have to get another battery

    • @keenanjeff
      @keenanjeff  2 года назад

      I have aver 300 miles on mine now!
      I would say 2-3 years you will be wanting to replace the battery the good thing is gotrax offers them might even be worth it to grab a extra battery for the G4 to carry around. gotrax.com/collections/electric-scooter-parts-collection/products/electric-scooter-batteries?variant=40046381629555

  • @johndeleon9910
    @johndeleon9910 11 месяцев назад

    OK why are you telling people a lie because I try 👀 see your video 10 times and it don't work for me

  • @taraventimiglia6119
    @taraventimiglia6119 Год назад

    Hi Jeff! I really need your help! I recently inhereited a gotrax gmax ultra scooter from a family member, however, I don't know the 3 digit code. I've tried all the hard and soft reset options but the scooter won't unlock. I've contacted gotrax but they are no help because I'm oiutside of the 90 day warranty timeframe. If you have any advice, I would greatly appreciate it! The family member who originially purchased it paid almost $900 and I really don't want to see it go to waste because I can't unlock it. Thanks!

    • @keenanjeff
      @keenanjeff  Год назад

      Did you try the default code 000 ?

    • @paulwright8378
      @paulwright8378 11 месяцев назад

      Theirs a reset button underneath the lcd,press it for 5 seconds then double click the on off switch

    • @jeremymitchell3685
      @jeremymitchell3685 10 месяцев назад

      @@paulwright8378wats the lcd ?

  • @sveren
    @sveren Год назад

    Thanks so much! I lost the manual to my Gotrax and this helped me a lot

  • @campo7622
    @campo7622 Год назад +1

    Brilliant..thank you