An Awful Way To Build A Gate
HTML-код
- Опубликовано: 13 окт 2023
- 👉🏻 Badass Hinges: bit.ly/SWIbadasshinges
👉🏻 Shark Hinges (from Joe Everest): bit.ly/OzarkSharkHinge
👉🏻 Anti-Sag Gate Kit: bit.ly/anti-sagkit
Hey, we know these guys are working hard and we respect that hustle. But, seriously now, someone has to call them out on this. - Хобби
“It’s like throwing a hotdog down a hallway” 🤣🤣🤣 you guys had me cracking up! Great video
😂
I like the "reaction video" in the sense of learning from others, and I applaud you for not belittling the others. Well done.
Are you seeing a growing trend in Wyoming for oil pipe fence?
re: Latch placement.
Looks like the pavers on the ground are set to tire width which implies to me backing in a trailer / vehicle through gate opening thus the placement of the latch as to not have a bar sticking out into said opening, eliminating the possibility of DIY pin stripe.
I love your videos. I commend you for your looking at other installers, foreign and domestic, and not only understand whats wrong and right, but show options how you would do it and why. You have easy logical explanations and are not afraid to learn other methods or use of hardware. You make it entertaining to watch your videos even though I will never need a fence. Thanks. Are you 3 Brothers?
Hey thanks! Yep--we're 3 brothers.
Y'all did it again! Another great video with a bit of family bickering😊. I learn so much with every one I watch. Keep up the good work
Yes the family bickering is bound to happen. 😅
@@SWiFence the fact that you left it in the video, speaks to your genuine character. A lesson I need to do in my videos!!
Couldn’t tell you how many times I’ve had the exact same wheel conversation with customers trying to say the gate needs a wheel. I tell them the same thing, if a gate needs a wheel it was built incorrectly.
Awesome job on how you educate the public. I have a master carpenter, who is also a furniture maker I just got done making 4-40 pound soffit wall brackets from my cover your pergola so they’ll be never any question about swaying, bending, bowing wind and so on.
Do you guys have a computer program you recommend for sketching up projects like gates. I'd like to have a proper blueprint plan for my welder and customers.
Hey guys, love your content and how insightful it is!
Using the fencemaster posts, what’s the longest you’d go on a 7’ tall, horizontal swing gate?
Assuming proper bracing on the gate with compression and the tension, anti-lag system detailed in your videos. Could also go with metal bracing as mentioned in your video of the woodworker making that like 12’ long gate.
Would love some input! Thanks!!
You could do about 4', but if you decide to double-up your postmasters, you could probably accommodate up to 6'.
I saw there was a typo. It’s a 6’ tall fence, not 7, but what post setup would you recommend for an 8’ swing gate?
Can do 2 gates if needed, but would prefer one.
4" SS40 pipe or 1/4" wall square tubing
The strength of the posts will absolutely not be an issue either. I don't think you guys are considering the concrete slab that is holding it in place as well. You are much more knowledgeable than me in fence building areas. I mainly have concrete guy. I will definitely get a hold of you on my next gate bill to get your opinion on it. It's been about seven months by the way and the gates holding very strong.
This video wasn’t meant to attack you in any way. We understand that there are factors we don’t know about such as customer budget. Our goal is only to entertain and educate. Obviously you have a following and we only aim to shed lights on ways to improve on what you did so that if others are watching they can have a better idea of how to install a top notch gate system. Because gates are the part of the fence that the customers interact with, they are especially important. They are also the number one call back. Keep up the good work and again we applaud you and your wife for your work ethic and hustle mentality. Cheers!
please share some other fence channels you recommend. i just bought a farm and i need to learn
www.youtube.com/@JoeEverest
www.youtube.com/@mrfenceacademy
www.youtube.com/@HAXMAN/search?query=fence
www.youtube.com/@StoneyRidgeFarmer/search?query=fence
Also, there is zero chance of that gate, shutting too fast. The reasoning for the wheel on the gate was because it has a huge slope up right where the gate shuts so instead of having a 90 pound lady have to struggle closing the gate she just push on it and the wheel wall roll the last 5 inches
that reminds me, I need to adjust the truss rod on my guitar!
😁
Moral of the story: Do not hire any company that uses inferior gate products or methods. When you want it done right, call Mark, Master Gater.
Ha haaahah haa. Hilarious. I thought about moving to Wyoming...the rest of the country should be cool like these guys.
I haven’t chimed in for a while, so I just wanted to let you all know that I disagree with the three of you. Not sure on what, but you can always count on me to comment something stupid. Lol. Nice video guys.
Roger! Good to know you're still out there. 👍🏻 And I'm going to pretend you said you agreed with me.
😳
The client was a friend of mine she had had not very much money. I actually didn't even make money because all the extras I did for what she had you can't always do a 10 or 10 job when you're only getting paid for a two out of 10 job I did switch the support rail to the proper angle. tho lol
hotdog down the hallway...ha ha ha ha ha ha ha🤣🤣