I completely love the detail into these videos I do all the work on my 300 and you guy make it very simple to me as a visual and hearing learner Thanks you guys
this video was extremely helpful keep them coming for the 2006 Chrysler 300, 3.5! I am a woman that doesn't mind getting greasy and knows my way around a motor bit not very familiar with the 300. great videos thanks
+tammy gatheright Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com?RUclips&CTA+Comment&MrJC_jXshs4
Thank you for taking the time to make this video I have a V6 300 I replaced the throttle body sensor and it was still acting funny I looked act the actual part and it was filthy and after cleaning it really well it hasn’t gave me no problems since it was the sensor & the actual throttle body needed cleaned and this is a good thing to know and it really fixed my issue it also needed a battery that was a whole other issue I did not want to deal with becsuse these cars batteries are behind the wheel well and it’s sucks taking a tire off a car just to change the battery!
Thanks for the video I have a question will a dirty throttle body cause the car to go into limp mode. I have a 2007 Dodge Charger 3.5 and I'm getting a lightning bolt at about 3K RPMs. Thanks for any help.
thanks for the video, it came in handy today when I cleaned a customer's 06 300. I found that I didn't have to remove the bracket completely, just the 2 mm nuts and 1 15mm bolt. I loosened the forward bolt and moved the bracket out of the way. saved a little time. you got some great videos. keep up the good work. wished I had a lift though.
+Dream Tube Thank you for checking us out. If you would like to leave us a review on Google it would be greatly appreciated www.resellerratings.com/store/1A_Auto_Parts
Thank you for the great video it really helpful.. just want to ask if I need to reprogram the throttle body after installation because I heard that from some workshops otherwise it will not be tuned right as before ??
Question if the tps goes bad could that throw other codes I have a friend with a no start issue could the throttle body actuator/tps be the culprit throws codes p2111,p1004,p2006 and p0562 p3021 p0113
try turning the key on engine off, depress gas pedal to the floor and release within a 3 second interval then turn key back off and should be good to go.
+olye olivier adou We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
1A Auto Parts So would you be most likely is going bad the light keeps coming on and my RPMs are at high 3000 When I did my spark plugs I didn’t disconnect the batteryAnd I took off the throttle body without disconnecting the battery
Its a pain to get to it if youre not to familiar with the vehicle , so with all that work you're better off putting a new egr valve and cleaning out just the egr tube .
Another video from a parts supplier that gives you enough info to tackle the job yourself but also does not include info that will save you from catastrophe. He did not give you torque specs on installing the TB because if you strip out the bolts from over torque they got a shiny new expensive intake to sell you. He did not caution you when cleaning to gently move the throttle when cleaning or internal damage to the cheap made in china plastic gears would break .. because you guessed it they got a shiny new throttle body to sell you. also he did not say to check or replace the o-ring gasket ? why ? they will sell you one with the intake or TB seperately and not much profit in it by itself so wanna look like the nice company that will not sell you something unless you need it. So in closing tighten the bolts snugly to tb its a plastic intake and dont manhandle the throttle plate. and he also did not tell you how to relearn the idle if you run into issues with the car making a drastic change after cleaning and it needs to relearn to run
Cleaning it is a maintenance routine it will fix issues from carbon buildup and throttle blades catching from said buildup. If you are cleaning a throttle body with a bad motor or internal gear issue then cleaning doesn't fix that issue. also when cleaning that throttle blade is attached to a motor and gears assembled by the LOWEST bidder so expect it to be cheap plastic gears if you man handle the throttle body during cleaning you will be buying a new one shortly. when they first came out we were told to NEVER move the blades by hand or it damages the gears. apparently over the decade since they were introduced so many people said hell wit it and cleaned um that warning has been ignored .
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Just wanted to say thank you to A1 for putting up these videos for Chrysler 300 I'm extremely grateful very rarely do you see these online
I completely love the detail into these videos I do all the work on my 300 and you guy make it very simple to me as a visual and hearing learner Thanks you guys
this video was extremely helpful keep them coming for the 2006 Chrysler 300, 3.5! I am a woman that doesn't mind getting greasy and knows my way around a motor bit not very familiar with the 300. great videos thanks
+tammy gatheright Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com?RUclips&CTA+Comment&MrJC_jXshs4
Thank you for taking the time to make this video I have a V6 300 I replaced the throttle body sensor and it was still acting funny I looked act the actual part and it was filthy and after cleaning it really well it hasn’t gave me no problems since it was the sensor & the actual throttle body needed cleaned and this is a good thing to know and it really fixed my issue it also needed a battery that was a whole other issue I did not want to deal with becsuse these cars batteries are behind the wheel well and it’s sucks taking a tire off a car just to change the battery!
Thanks for the video I have a question will a dirty throttle body cause the car to go into limp mode. I have a 2007 Dodge Charger 3.5 and I'm getting a lightning bolt at about 3K RPMs. Thanks for any help.
thanks for the video, it came in handy today when I cleaned a customer's 06 300. I found that I didn't have to remove the bracket completely, just the 2 mm nuts and 1 15mm bolt. I loosened the forward bolt and moved the bracket out of the way. saved a little time. you got some great videos. keep up the good work. wished I had a lift though.
Does anything need to be reset as far as computer or anything after cleaning thanks
Good work I learned a lot from listening to the game your putting down player
Thanks guys for these Videos and access to great parts !
+Dream Tube Thank you for checking us out. If you would like to leave us a review on Google it would be greatly appreciated www.resellerratings.com/store/1A_Auto_Parts
Question, Why didn't you clean the intake manifold after the throttle body while you had it removed already ?
How do you know if you just need to clean the throttle body versus replace it?
Thank you for the great video it really helpful.. just want to ask if I need to reprogram the throttle body after installation because I heard that from some workshops otherwise it will not be tuned right as before ??
+Mmad Xxx The computer should automatically adjust for it
yes there is a reset.
I did this and now have a flashing lightning bolt light on and barely works. What the hell? Does it need a throttle relearn procedure?
How often do you have to clean. It ?
Question if the tps goes bad could that throw other codes I have a friend with a no start issue could the throttle body actuator/tps be the culprit throws codes p2111,p1004,p2006 and p0562 p3021 p0113
Do u no werw thw throttle position sensor is located cant find it gotta change it is it built in the throttle body assembly itself
I have a chysler 300 2.7l 2007
Could I use this video for the throttle body on a 2004 Chrysler Condorde LXI?
as long as its a electronic throttle body. It will work on all
You guys are the best!!!!
Do you have to relearn the throttle body afterwards?
+Michael DaDon Yes, this will need to be relearned. Thanks for watching.
1A Auto Parts what if I don’t have the computer? Is there another way
@@1AAuto Yes is there a relearn without using an expensive scan tool?
What the name of the spray u are using
Can you post some videos for newer 300 molds like 2016. Thank You
try turning the key on engine off, depress gas pedal to the floor and release within a 3 second interval then turn key back off and should be good to go.
If you could please answer this so I turn in the car and when I want to put it in reverse it stalls what could be the issue
Le voyant de la commande electronique de papillon Christler est allumé et la voiture tremble et perd de puissance,quelle solution
+olye olivier adou We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
so how do you do 99' Chrysler 300M 3.5 l V6 ?
+John Eagle We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Did you have to reset the computer
+Johnny 209 You shouldn't have to.
1A Auto Parts So would you be most likely is going bad the light keeps coming on and my RPMs are at high 3000 When I did my spark plugs I didn’t disconnect the batteryAnd I took off the throttle body without disconnecting the battery
+Johnny 209 If there happens to be a check engine light on you may want to pull the code.
yes, relearn
as for diesel?
Can u clean an EGR valve? If so how?
Its a pain to get to it if youre not to familiar with the vehicle , so with all that work you're better off putting a new egr valve and cleaning out just the egr tube .
I don't have a vehicle service manual to teach me idle speed relearn procedure
Very easy to google it.
Another video from a parts supplier that gives you enough info to tackle the job yourself but also does not include info that will save you from catastrophe. He did not give you torque specs on installing the TB because if you strip out the bolts from over torque they got a shiny new expensive intake to sell you. He did not caution you when cleaning to gently move the throttle when cleaning or internal damage to the cheap made in china plastic gears would break .. because you guessed it they got a shiny new throttle body to sell you. also he did not say to check or replace the o-ring gasket ? why ? they will sell you one with the intake or TB seperately and not much profit in it by itself so wanna look like the nice company that will not sell you something unless you need it. So in closing tighten the bolts snugly to tb its a plastic intake and dont manhandle the throttle plate. and he also did not tell you how to relearn the idle if you run into issues with the car making a drastic change after cleaning and it needs to relearn to run
I don't know how to "idle speed relearn ", once I have installed new throttle body assembly in our '05 Chrysler 300 2.7liter...."
I smoke tested a Chevy Caprice 96, and spotted a vacum leak from the throttlebody shaft, is that normal or should it be rebuilt/replaced?
Take my advice, just replace it, cleaned it, problem left for 1 week and came back
The deposits don't build back up like that in a week lol
Cleaning it is a maintenance routine it will fix issues from carbon buildup and throttle blades catching from said buildup. If you are cleaning a throttle body with a bad motor or internal gear issue then cleaning doesn't fix that issue. also when cleaning that throttle blade is attached to a motor and gears assembled by the LOWEST bidder so expect it to be cheap plastic gears if you man handle the throttle body during cleaning you will be buying a new one shortly. when they first came out we were told to NEVER move the blades by hand or it damages the gears. apparently over the decade since they were introduced so many people said hell wit it and cleaned um that warning has been ignored .
Hemi engine