I did all 6 fuel injectors on my 06 Charger 3.5l. Your video made the job easier than I thought. Thank you so much for your step by step instructions. I owe you a beer!
That vid was a blessing, thx. Husband died last March, mechanic for 32 yrs. learned a lot over the yrs. but he always did the big stuff, even if it was over the phone, he knew the problem. Built plenty of Hot Rods along the way as well, most valuable lesson... As a woman, at any age, I’d rather try an do it myself before letting a jerk in a repair shop try and blow smoke up my ass!
+spindriff Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Engineers make the calculation for stress and vibration dynamics of the parts so it doesn't crack or come loose or over tighten the parts and cause damage. Good question
+Spen26 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank you so much for the instructions, on my way home car was running extremely rough went to Auto Zone computer error code was fuel injector in cylinder 4 went out. Made it home fixed it and now I can get to work tomorrow. Thank you, thank you so much!!!!!!
I have issues with getting the EGR to sit back in place properly giving me a new issue a vacuum leak, any pointers on how to get it to just go in more smoothly?
Do you guys have a video on replacing the fuel injectors on a 2009 Dodge Charger 2.7L V6, im sure its the same process but my engine look different then this one
+Joseph Miller Here is a link to the fuel injectors for your Charger, and also a video to go with them. Hope this helps you out. www.1aauto.com/fuel-injector/i/1aeek00226?f=630794&y=2009&RUclips&CTA%20Comment&ATony
I did my injector after watching this vides countless times! The injector was the only thing that popped up on when I had my car scanned....after I changed it and got it scanned again now it's saying it my FUEL PUMP. did I do some wrong? Did changing one injector cause my fuel pump to go bad? @1Aauto
Can you guys do one on a 2006 Chrysler 300 touring. My fuel line is busted and I can’t find anyone or any shop where I can find parts and how to do it! Please help me
I had to remove the support brace across the back that has cowl cover n wipers on to clear on my Charger, I swapped 1 rocker, wish had done both but only 1 had visible damage.. put back together and misfire #2 and heavy fuel use so injector bad, looking at refurbed injector sets for $65 shipped, that are cleaned n flow matched to within 1-2% depending on who buy from.. thought better than just putting in 1 injector which might have more than 2% difference in spray..
my book shows that EGR gasket not against rear of lip , shows it midway.. FelPro give us 2, and book said gaskets, so was little confusing as if they wanted us to use 2, or just a spare in case have issues, or reuse intake, not sure why 2 in their kit... support brackets on right, I had to remove the lower bolts and slip over, they just would not slip back on..
We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. +Theresa w
@@1AAuto Thanks guys! My husband is confident he can replace the O rings himself, he is very experienced with cars but has never done this before makes me a little nervous. I smell gasoline when ever I start my car and while sitting at a light it runs fine.
yeah its best just to change out that one fuel injector (yours is reading p0301 (which is a cylinder misfire so it should be the first cylinder injector) fuel injectors are pretty long lasting so it's alright to just change the one That is broken. I got a p0205 I'm changing soon for the second time so I'm used to it
If that's a misfire it could be the wire. If it's the wire leading to the coil just buy a new connector that comes with wire. Obviously if it's a bad coil or injector replace that.. butt connectors or soldering a new piece of fried wire might be the trick
so I followed every step that you took and everything went well I thought but then when I restarted the car and it started backfiring. what could've happened?
Could be as simple as a vacuum leak or there may have been excess fuel or debris spilled into the cylinders when the fuel rail and injectors where off. If it stops backfiring after running for a bit then it was just excess fuel, if it stutters and struggles to run it may be a vacuum leak, but if it continues to backfire then you may have some injectors sticking open or some other problem with a cam or crank sensor or even a timing belt issue. Most likely a vacuum leak like forgetting one of the hoses on the back or the PCV hose or EGR tube not seated correctly or even a cracked hose.
1A Auto Parts I purchased these injectors installed them and the engine light came on. I couldn’t figure out the problem so I took them to a mechanic and was told the injectors were over fueling the engine.
+Justin Moses Thank you for checking us out! If you have encountered an issue with fuel injectors purchased from us please feel free to contact us at 888-844-3393 or service@1aauto.com so we can better assist you, thank you!
Great video. Is it always necessary to disconnect all the fuel injectors connectors even if you're changing just one fuel injector? I don't think it's necessary but I wanted to ask since I saw it in the video.
+Ahmed Saidu-Kamara Thank you for checking us out. It is recommended to remove all of the connectors in order to ensure that no issues are presented and no fuel is pushed out when completing the repair. 1aauto.com
You skipped a bit where you put on the EGR tube into the intake... I think that deserved some more video time or at least a little more emphasis on "make sure that EGR is on correctly before tightening down any bolts." I forgot about it and had to take the intake off again. :/ Don't forget that EGR tube!
Yessss!! I wax freaking out because I thought it was a tube. I was looking all over for it!! All in my engine on the ground until I realized it moved. I kept watching this to find out what it looked like. Took me an hour haha talk about anxiety
+Malcolm 'Jaffe Thanks for watching! One of the possible causes that would give you this could is a leaking injector. You should inspect the fuel injectors first before purchasing these parts: www.1aauto.com/fuel-injector/i/1afin00025?RUclips&CTA+Comment&AYQ1QOAY
You know there are TWO o rings that go on the tubing the blue one is only for dust the second that you didn't put on is the functional o ring. It's the fifth video I've watched that the mechanic failed to mention.
You need to check your math!! You state the manufactures spec is 150-inch pounds and is 9-foot pounds. 12-inch pounds=1 foot pound so 9-foot pounds is 108-inch pounds. I have a 1/4-inch drive torque wrench; I broke one of the intake bolts off in the intake at 150-inch pounds. You need to check it and edit the video, so others do not make the same mistake.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I did all 6 fuel injectors on my 06 Charger 3.5l. Your video made the job easier than I thought. Thank you so much for your step by step instructions. I owe you a beer!
What code was your car giving you that made you change the fuel injectors? I have the same car and need some help please
@@jonathanbarrios7000 either p0201, 0202, 0203, etc up to 0206
That vid was a blessing, thx. Husband died last March, mechanic for 32 yrs. learned a lot over the yrs. but he always did the big stuff, even if it was over the phone, he knew the problem. Built plenty of Hot Rods along the way as well, most valuable lesson... As a woman, at any age, I’d rather try an do it myself before letting a jerk in a repair shop try and blow smoke up my ass!
+Gma 2Dawgz Thanks for checking us out! 1AAuto.com
Lol..Thank you Gma2dawg... Hope All is Well 🙏
One of the best videos I have watched to help me work on my car. This young man explained everything in great detail as he did it.
+spindriff Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
This was a great video! I just don't understand why this vid has any thumbs down. Haters I guess. Thank for this informative step by step.
What happened to the footage from 11:22 to 11:26? I'll tell you what happened. A lot of swearing that EGR tube is the devil.
So do I need to be careful when removing the intake from the egr tube? Is their enough room to slide it off and not worry about bending it?
Will this be the same procedures for the 2006 2.7L
Excellent video. I was able to easily repair my No. 1 faulty injector myself
+OBS Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I jus changed my fuel injector but still experiencing a lil bit of shaking. Any pointers or tips?
Check your inition coils and spark plugs
What is the importance of torquing the bolts to a specific amount?
Engineers make the calculation for stress and vibration dynamics of the parts so it doesn't crack or come loose or over tighten the parts and cause damage. Good question
Dose this same video apply to v6 2.7L ?? Everything your doing
Thank youu so much!! This video helped me!! I just replaced my fuel injector
+Spen26 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank you so much for the instructions, on my way home car was running extremely rough went to Auto Zone computer error code was fuel injector in cylinder 4 went out. Made it home fixed it and now I can get to work tomorrow. Thank you, thank you so much!!!!!!
Thank you for the great feedback!! +Joe Do
Was it shaking when stoped
How do u test to find out which injector is bad
I have issues with getting the EGR to sit back in place properly giving me a new issue a vacuum leak, any pointers on how to get it to just go in more smoothly?
Should I also change the spark plug on the cylinder that the injector is being changed?
What a great detailed video how much should on average. Would this cost to have done 1 injecter and so on
Like 50$
Do you guys have a video on replacing the fuel injectors on a 2009 Dodge Charger 2.7L V6, im sure its the same process but my engine look different then this one
+Joseph Miller Here is a link to the fuel injectors for your Charger, and also a video to go with them. Hope this helps you out. www.1aauto.com/fuel-injector/i/1aeek00226?f=630794&y=2009&RUclips&CTA%20Comment&ATony
wow dude really cool video, i watch all youre videos they are great
I did my injector after watching this vides countless times! The injector was the only thing that popped up on when I had my car scanned....after I changed it and got it scanned again now it's saying it my FUEL PUMP. did I do some wrong? Did changing one injector cause my fuel pump to go bad? @1Aauto
Is this gdi or direct injection i have a 05 5.7
Why a new gasket? How critical is torquing?
Can you guys do one on a 2006 Chrysler 300 touring. My fuel line is busted and I can’t find anyone or any shop where I can find parts and how to do it! Please help me
+MIGUEL CASTANEDA We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
which one is injector 4??
Just google the fireing order.
I had to remove the support brace across the back that has cowl cover n wipers on to clear on my Charger, I swapped 1 rocker, wish had done both but only 1 had visible damage.. put back together and misfire #2 and heavy fuel use so injector bad, looking at refurbed injector sets for $65 shipped, that are cleaned n flow matched to within 1-2% depending on who buy from.. thought better than just putting in 1 injector which might have more than 2% difference in spray..
my book shows that EGR gasket not against rear of lip , shows it midway.. FelPro give us 2, and book said gaskets, so was little confusing as if they wanted us to use 2, or just a spare in case have issues, or reuse intake, not sure why 2 in their kit... support brackets on right, I had to remove the lower bolts and slip over, they just would not slip back on..
Will this work on my 1993 Concorde? One of mine is leaking. Do we need to remove the rail?
We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. +Theresa w
@@1AAuto Thanks guys! My husband is confident he can replace the O rings himself, he is very experienced with cars but has never done this before makes me a little nervous. I smell gasoline when ever I start my car and while sitting at a light it runs fine.
My charger is giving me the p0301 fuel injector circuit open. is it ok to just change one injector
yeah its best just to change out that one fuel injector (yours is reading p0301 (which is a cylinder misfire so it should be the first cylinder injector) fuel injectors are pretty long lasting so it's alright to just change the one That is broken. I got a p0205 I'm changing soon for the second time so I'm used to it
Yes
If that's a misfire it could be the wire. If it's the wire leading to the coil just buy a new connector that comes with wire. Obviously if it's a bad coil or injector replace that.. butt connectors or soldering a new piece of fried wire might be the trick
so I followed every step that you took and everything went well I thought but then when I restarted the car and it started backfiring. what could've happened?
+Courtney Vranesevich If there happens to be a check engine light on, you may want to pull the code to see what it's pointing to. 1aauto.com
Did you figure your issue out? Thhis is my biggest fear about doing t his job.
Could be as simple as a vacuum leak or there may have been excess fuel or debris spilled into the cylinders when the fuel rail and injectors where off. If it stops backfiring after running for a bit then it was just excess fuel, if it stutters and struggles to run it may be a vacuum leak, but if it continues to backfire then you may have some injectors sticking open or some other problem with a cam or crank sensor or even a timing belt issue. Most likely a vacuum leak like forgetting one of the hoses on the back or the PCV hose or EGR tube not seated correctly or even a cracked hose.
1A Auto Parts I purchased these injectors installed them and the engine light came on. I couldn’t figure out the problem so I took them to a mechanic and was told the injectors were over fueling the engine.
+Justin Moses Thank you for checking us out! If you have encountered an issue with fuel injectors purchased from us please feel free to contact us at 888-844-3393 or service@1aauto.com so we can better assist you, thank you!
Great video. Is it always necessary to disconnect all the fuel injectors connectors even if you're changing just one fuel injector? I don't think it's necessary but I wanted to ask since I saw it in the video.
+Ahmed Saidu-Kamara Thank you for checking us out. It is recommended to remove all of the connectors in order to ensure that no issues are presented and no fuel is pushed out when completing the repair. 1aauto.com
Hello, can you tell me which one fuel injector 3 is? Im getting a code P0203 and I would like change that fuel injector. Thanks
Should be the middle one on the passenger side
Thanks guys you really helped me change my spark plugs and fuel injector. Great job
+Ojay Briz Thanks for checking us out. 1aauto.com
Great video watched it and fix my car thanks keep up the good work!
+Name less We hope that you have enjoyed our video. Have a great day! 1aauto.com
Does this will work in v8.
+Salimullah alam Yes, the installation of this item should be very similar.
@@1AAuto awesome great thanks
You skipped a bit where you put on the EGR tube into the intake... I think that deserved some more video time or at least a little more emphasis on "make sure that EGR is on correctly before tightening down any bolts." I forgot about it and had to take the intake off again. :/ Don't forget that EGR tube!
Yessss!! I wax freaking out because I thought it was a tube. I was looking all over for it!! All in my engine on the ground until I realized it moved. I kept watching this to find out what it looked like. Took me an hour haha talk about anxiety
Does anybody get the code p0138? Does this fix it? I already changed the o2 and catalytic converter.
+Malcolm 'Jaffe Thanks for watching! One of the possible causes that would give you this could is a leaking injector. You should inspect the fuel injectors first before purchasing these parts: www.1aauto.com/fuel-injector/i/1afin00025?RUclips&CTA+Comment&AYQ1QOAY
That sounds like an O2 sensor is shorted to battery voltage. Either in the harness or the O2 sensor.
Have had intake off four times and cannot get it past the transmission tube to be able to completely remove it from the car.
There is a metal flap that you can loosen close to the windshield wipers that will give you some room to take off the plenum.
Is this the 2.7 engine
You know there are TWO o rings that go on the tubing the blue one is only for dust the second that you didn't put on is the functional o ring. It's the fifth video I've watched that the mechanic failed to mention.
150 in lbs does not round up to 9 ft lbs. 12:02
this must be for a Dodge Magnum 2005,same process
It's funny how I see other Sebrings in my town with 4cylinder English when mine is a 6cyl.
What if you forgot to remove the fuel relay
150 inch pounds would be 12.5 ft pounds not 9. Either way it’ll be fine though. Good job.
Y u never have anything on the 5.7!!!!!!!!
You need to check your math!! You state the manufactures spec is 150-inch pounds and is 9-foot pounds. 12-inch pounds=1 foot pound so 9-foot pounds is 108-inch pounds. I have a 1/4-inch drive torque wrench; I broke one of the intake bolts off in the intake at 150-inch pounds. You need to check it and edit the video, so others do not make the same mistake.
Those things you slide into the injectors was a b**** to put on. Two of em wouldn't even snap back on right so I just left em