Miałem to samo, potrzebna kalibracja, parę godzin i działa, a chińczyk oddał kasę. Naprawiłem go tylko by spr, czy się da. Nigdy więcej takiego chłamu nie kupię.
Point is you can't trust it if you need to check it each time. If you had no reference and you trusted the laser you would have been totally off. What's the point of that
@@Vyk70r actually no, all manufacturers, including Dewalt and Bosch suggest consumers to test, measure and fix accuracy of their self leveling lasers from time to time, you can look up methods on the internet or read lase level's manual.
This video is a joke for God sake. Author compare a spirit level having at the best a precision of 8 MOA (minute of an angle ) or 0.5% with a self leveling laser tool even a cheap one. I use a BOSCH professional rotating laser costing almost 2000 USD just because outside it operates with a beam receiver up to 200 m. For inside work, especially for drywall metal framing I use this kind of good for nothing laser level simultaneous with BOSCH GCL 2-15 and their lines match perfect. Batteries don't last more than 1 hour but with adapter cable and a power-bank it last more than required for less than 100 USD. It is just a hobby tool but not as ridiculous in accuracy as you claim.
Wow so beautiful..
You like it??
Thanks for your advice
Miałem to samo, potrzebna kalibracja, parę godzin i działa, a chińczyk oddał kasę. Naprawiłem go tylko by spr, czy się da. Nigdy więcej takiego chłamu nie kupię.
This is very easy to fix. You remove the tower and adjust from the screws. It takes 5 minutes.
Point is you can't trust it if you need to check it each time. If you had no reference and you trusted the laser you would have been totally off. What's the point of that
It must be perfect this is not acceptable for a self level laser...
Como repararlo
@@Vyk70r actually no, all manufacturers, including Dewalt and Bosch suggest consumers to test, measure and fix accuracy of their self leveling lasers from time to time, you can look up methods on the internet or read lase level's manual.
@@vs07 Not true. If it’s off level, calibrate it one time and it’s good for future uses. No need to calibrate every time.
Did you try yo fix it? I justi check your video. I wanna cry 😭
you can fixed alone
Mannnn...this is dangerous!!..
Ja kupiłem deko, będę testowal :)
Sabes calibrarlo de adentro
Its easy to fix ;)
This video is a joke for God sake. Author compare a spirit level having at the best a precision of 8 MOA (minute of an angle ) or 0.5% with a self leveling laser tool even a cheap one. I use a BOSCH professional rotating laser costing almost 2000 USD just because outside it operates with a beam receiver up to 200 m. For inside work, especially for drywall metal framing I use this kind of good for nothing laser level simultaneous with BOSCH GCL 2-15 and their lines match perfect. Batteries don't last more than 1 hour but with adapter cable and a power-bank it last more than required for less than 100 USD. It is just a hobby tool but not as ridiculous in accuracy as you claim.
maybe dropped before test?
Fajny laser
Is not normal to rotate !!!!
oh Jesus :D
Sol mabey .