These have to be one of the best modern cars. These will be sought after in the future. I like the ISUZU/Bedford Midi in the back. Had one as a camper van with a column shift.
The show casing of the flawless rock guard for the headlights made me send you a sub. Always been interested in the Panda, buy never been able to see much video wise since most just showcase them driving in mud. Looking forward to see what more may come!
I have a 21 plate mark 3 Fiat Panda 4x4 Wild one of the last ones before the Panda Cross. I’ve only done 5300 miles in it as a weekend warrior. I like driving in snowy roads no serious off road. Other than annual servicing I’ve not had any problems yet though I do read about so many and twin air turbo blowing at 60,000 miles plus. It does put a smile on my face driving it though
@@daviddwight5745 I've seen a special someone built with big tyres, high lift, a roof air scoop, beefier everything in red covered with sponsors graphics, is that the one you mean? I'm talking about a specific production model produced by Fiat for the road, in Paris Dakar style.
Very cool!! I own a 4x4 Climbing with the incredible 1.3 mjt and Haldex rear diff. It’s incredibly unstoppable. I strongly recommend the diesel engine. Original it has about 145 Nm, but with easy mods can arrive easily to 180 Nm!! After all, you own a really cool build, really like this!
I want to do something similar but on a smaller scale on my VW UP! I just really need some bigger tires, maybe 15~16” preferably OEM from other VW, so nobody notice at first. I just need it to me a little higher to be more comfortable on bad roads.
@@PTP4X4 I think would look weird a lifted up with the 14” tires. My up is the Brazilian model, basically an European crossup without the plastic around the wheel arc.
Finally Pedro's jump from Instagram to RUclips. I have read that the 30mm lift kits give some inconveniences that the 20mm does not. Is that true? Impatiently waiting for the next video
Thank you ! Yes that’s correct. The RH front drive shaft will hit the subframe on full droop. I am planning to do a modification to cure this, but also a higher lift kit !
Blown away with the work you've done to your panda 4x4, I've got a MK3 twinair 4x4 I was considering fitting roof bars with a cage similar to yours plus maybe a front bull bar with a light bar , my problem is I've got zero mechanical skills 😢
Nice engine conversion!👍 The sump guard certainly looks the part but those exposed steering track rods are a bit of an achilles heel on rocky terrain or in deep ruts. An old workmate of mine had one and it was very capable for a car it's size and designed primarily for road use. Plenty of water around just lately to test the snorkel and extended breathers!😂👍
Great video. Think I’ve been watching some of your other vids too. Question: is there a good forum for these? I don’t know much about the Panda 4x4 but I’d like to learn more and chat about them. Thanks.
Hi great job! Pedro inspires us all, and leads the way of panda upgrading. In my situation I like my snow tyres , panda is my family car but I use it for off road and snow adventures as much as possible . I ve done the suspension upgrades, changed my tyres from 175 65 r15 to 185 65 r15, but I desperately need a bit more ground clearance. I am thinking of fitting 195 70 r15, in order to gain 2cm more. Do u think they will fit or do I need to cut the bumps and the sides?
Thanks ! You’ll probably catch on the arch trims by the rear sill section .. it’s really tight on there. Lift kits are not much to buy which would help
The radio antenna bending on the rack, why not replacing it by a smaller one? On my up! the original antenna covered in rubber started to break and I replaced it with an small aluminum antenna from Aliexpress, basically the smallest I could find since my radio works fine even without an antenna, and I mostly only use it to play from my phone Bluetooth anyway.
Wow, i have a panda 4x4 like this and i was intrested that i never seen an offroad built on this car. You are the first person i see doing this and it’s so great. The details you gave into the video give me some good ideas of what i wan’t to do with mine😄. I am just wondering if the « automatic activation » of the AWD stay reliable to do off road? Thank for your vidéo ( and sorry for the language mistakes, im french). 👍
Very good English ! And thank you for your positive feedback. So far the 4WD has not let me down. Seems to function when ever I need it and I have done some quite extreme stuff.
very good job... i have same car, and i want upgrade the engine like you but i can believe how you have change the new engine and ECU without troubles! is very interested to know the work about that like a specific video! 😂thanks!
Did someone say off road mini? I just sold my last one, a Mitsubishi Pajero Mini that is Great wee 4×4, proper low range transfer case, automatic front hub locks and some 3 inches shorter than an actual BL mini at 9ft 9inches. It would be very interesting, in my opinion, to compare the off road ability of a Panda 4x4, Sisley preferably, with the tiny Kei class Mitsubishi. I need a panda 4x4 now that there's a tiny off reader sized hole in my life, was that river crossing undertaken in 4 low or was it better to rely on front wheel drive to paddle Pongo along? The Pajero was RWD when not in 4 wd, great wee toy but, exiting a muddy track onto a surfaced road made it somewhat too oversteery 'til the front wheels were dried out.
It would need to be submerged in water for a very long time for it to fill up enough to create a problem. So far to date I have not had any water get in post filter.
Hello, I need to put 20 millimètres spacers at the rear of my 169 4x4. Do I need to remove the rear diff to do it ? Could you give me some explanations please ? Many thx !
I know .. but it was in a very poor state .. so just think of it as one panda saving another ! And it will make yours more rare and help it become a future classic 😂 joking aside it was a shame .. but I will be selling the parts to support other 100HP pandas
I'm the proud owner of a 100hp and I really can't see such a rare and historic vehicle treated like that. Please do something to resurrect it. The 1.2 8 valve can get up to 100 hp with a remap and some work on the heads, as evidenced by Formula Junior cars in italy.
Pomigliano d'Arco, one. Solihull, nil. 😂 Did you go back to tow that P38 through the river, or was the weight of its owner's electrics based anxiety too much for Pongo to haul. And in 2024, we find that Fiat's are actually really reliable, whereas - sadly - JLR are averaging one breakdown per week, if we're to believe the social media relating to the split new JLR vehicles. Oh the irony of that P38, especially if it's blessed with the Diesel engine, being almost certainly more reliable than new RRs. Ahhh, what a shame.
Hi Pedro, please can you help me? My rear drives are not working. I removed the electro-pneumatic valve and tested it at 12V to see if it worked, and it lifted the valve upwards (which I assume is working). We changed the oil, but it still doesn't work. Nothing can be heard in the differential, and the driveshaft rotates normally without any strange sounds. Model is Fiat Panda 169 4x4 1.2 51KW. Do you know what happens? Thanks!
Hi! Hmm.. that does sound strange. I would think it will be the viscous coupler itself that is not working. The electric valve may be working, but if the viscous coupling itself is not working it will not engage drive. That is the only realistic thing that could be at fault
@@PTP4X4 I don't have viscous coupler(if you mean on this www.fiatforum.com/attachments/2431d8ff-fa37-4954-b972-05ca86288d01-jpeg.421576/) my model look like this (img.7zap.com/images/oem/fiat/Imgs/images/2B/2B92DB26B3CE8FFAA5E451AFE2DDE098.png). Thanks for answer!
@@PTP4X4 Are you saying that if it 'slipped,' the drive won't work? I wasn't aware of that part. I'll change it and let you know the details. Thanks a lot, Pedro.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
what a fun little compaclander. my buddy had a 1st gen panda 4x4 that never skipped a beat
These have to be one of the best modern cars. These will be sought after in the future. I like the ISUZU/Bedford Midi in the back. Had one as a camper van with a column shift.
The show casing of the flawless rock guard for the headlights made me send you a sub.
Always been interested in the Panda, buy never been able to see much video wise since most just showcase them driving in mud.
Looking forward to see what more may come!
Thanks !! More into come for sure !
Mental!... I want one!
Brilliant looking vehicle. I love the homemade snorkel - very professional.
Thanks !
I have a 21 plate mark 3 Fiat Panda 4x4 Wild one of the last ones before the Panda Cross. I’ve only done 5300 miles in it as a weekend warrior. I like driving in snowy roads no serious off road. Other than annual servicing I’ve not had any problems yet though I do read about so many and twin air turbo blowing at 60,000 miles plus. It does put a smile on my face driving it though
Pedro is looking pretty damn cool. Have fun together
That's insane, I just randomly clicked on this and your reg plate almost spells my business name!
Ahh it does ! That is weird
Awesome wee weapon of a car, love seeing your adventures with Pedro. Love it💙
Nice mods.
I've always wondered why Fiat never brought out a Paris Dakar version of the Panda 4x4 like a beefed up version.
I think they did ! From memory it was a red one.
They did! It’s sick
@@daviddwight5745 I've seen a special someone built with big tyres, high lift, a roof air scoop, beefier everything in red covered with sponsors graphics, is that the one you mean?
I'm talking about a specific production model produced by Fiat for the road, in Paris Dakar style.
Excellent job mate! She looks gorgeous and ready for any challenge 🤘
Thank you! Cheers!
For the money the best 4x4 in the globe!
I agree !
Epic stuff! Love a Panda 4x4
very nice car
Thank you !
What a nice build to be honest well done mate 🎉🎉
Thanks 😁
Such a beast, very nicely done mate
Thanks !
Awesome set up. Looks fun to drive.
It is! Thanks
What a cracking car! Such a cool little thing
Thanks !
Super nicely done))) love it))
Thank you! Cheers!
Can you show a video of the wheel arches modification?👍🏻✌🏻
I can ! In my walk around video and my front bumper modification video you can see the arches better
Very cool!! I own a 4x4 Climbing with the incredible 1.3 mjt and Haldex rear diff. It’s incredibly unstoppable. I strongly recommend the diesel engine. Original it has about 145 Nm, but with easy mods can arrive easily to 180 Nm!! After all, you own a really cool build, really like this!
Thanks !! Glad you are a part of the Panda 4x4 world !
You mean a new map for the engine or sime other mods?
@@blahaz a map can help, yeah
sweet rig man
Really nice well done mate
Thank you !!
Great build. When your channel gets bigger bring him to New Zealand on tour. We'll go wheeling and test him out on some of our tracks.
That would be a dream to do that!
I subscribed coz, why not?
Nice build man
Why not ! Thanks !
WOW Mighty Stuff
Sweet and nice. Good work!
Super nicely done!!
Thank you!
The best.
I want to do something similar but on a smaller scale on my VW UP!
I just really need some bigger tires, maybe 15~16” preferably OEM from other VW, so nobody notice at first.
I just need it to me a little higher to be more comfortable on bad roads.
That would be cool! I’m sure you could buy a lift kit for it as well which would be cheap and easy
@@PTP4X4 I think would look weird a lifted up with the 14” tires.
My up is the Brazilian model, basically an European crossup without the plastic around the wheel arc.
Very interesting, thank you. I have a Panda-2 4x4. I use this wonderful car in the war. I am a soldier machine gunner
Oh very cool !!
Finally Pedro's jump from Instagram to RUclips.
I have read that the 30mm lift kits give some inconveniences that the 20mm does not. Is that true?
Impatiently waiting for the next video
Thank you ! Yes that’s correct. The RH front drive shaft will hit the subframe on full droop. I am planning to do a modification to cure this, but also a higher lift kit !
Hello, could you please provide me with the reference for your lift kit?
Wow very informative video . i particularly like the CB radio and wonder if you have a CB handle/name
Blown away with the work you've done to your panda 4x4, I've got a MK3 twinair 4x4 I was considering fitting roof bars with a cage similar to yours plus maybe a front bull bar with a light bar , my problem is I've got zero mechanical skills 😢
I’m sure a local garage could do it for you! It’s not too difficult and would not cost much.
Nice engine conversion!👍 The sump guard certainly looks the part but those exposed steering track rods are a bit of an achilles heel on rocky terrain or in deep ruts. An old workmate of mine had one and it was very capable for a car it's size and designed primarily for road use. Plenty of water around just lately to test the snorkel and extended breathers!😂👍
Thank you !! Yeah the arms are a bit.. they haven’t been an issue yet though.
Great car!
Tres mignonne votre Panda 😊😊
Great video. Think I’ve been watching some of your other vids too. Question: is there a good forum for these? I don’t know much about the Panda 4x4 but I’d like to learn more and chat about them. Thanks.
Thanks very much! The Facebook groups for panda 4x4’s are pretty helpful, worth joining those.
Very nice. Great 😊👍
Thank you! Cheers!
Hi great job! Pedro inspires us all, and leads the way of panda upgrading. In my situation I like my snow tyres , panda is my family car but I use it for off road and snow adventures as much as possible . I ve done the suspension upgrades, changed my tyres from 175 65 r15 to 185 65 r15, but I desperately need a bit more ground clearance. I am thinking of fitting 195 70 r15, in order to gain 2cm more. Do u think they will fit or do I need to cut the bumps and the sides?
Thanks ! You’ll probably catch on the arch trims by the rear sill section .. it’s really tight on there. Lift kits are not much to buy which would help
Fantastic.
Many thanks!
The radio antenna bending on the rack, why not replacing it by a smaller one?
On my up! the original antenna covered in rubber started to break and I replaced it with an small aluminum antenna from Aliexpress, basically the smallest I could find since my radio works fine even without an antenna, and I mostly only use it to play from my phone Bluetooth anyway.
It never really bothered me, but I may replace it in the future !
Zombie apocalypse absolute weapon well done 👏
Exactly ! Thanks 🙏🏼
You should probably drive that to Mongolia and back, it would be entertaining.
Would love to ! Maybe one day
Wow, i have a panda 4x4 like this and i was intrested that i never seen an offroad built on this car. You are the first person i see doing this and it’s so great. The details you gave into the video give me some good ideas of what i wan’t to do with mine😄. I am just wondering if the « automatic activation » of the AWD stay reliable to do off road? Thank for your vidéo ( and sorry for the language mistakes, im french). 👍
Very good English ! And thank you for your positive feedback. So far the 4WD has not let me down. Seems to function when ever I need it and I have done some quite extreme stuff.
Those wheels look great
What size are they and what are they off please
The wheels are just painted 14” fiat steel wheels. Tyres are 215/70 14
Would it not have been easier to make the 100hp a 4wd? That's what I been thinking of doing... Love your car!
No way of mounting the rear subframe to the body unfortunately.. only 3 days work to do the engine swap
legend
Grateful for video, my wallet however hates you as it knows it is going to be pounded!
Good work!
very good job... i have same car, and i want upgrade the engine like you but i can believe how you have change the new engine and ECU without troubles! is very interested to know the work about that like a specific video! 😂thanks!
Very well thought out, could use these mods in South Africa 🇿🇦
That would be a dream to take it there
Did someone say off road mini?
I just sold my last one, a Mitsubishi Pajero Mini that is Great wee 4×4, proper low range transfer case, automatic front hub locks and some 3 inches shorter than an actual BL mini at 9ft 9inches.
It would be very interesting, in my opinion, to compare the off road ability of a Panda 4x4, Sisley preferably, with the tiny Kei class Mitsubishi.
I need a panda 4x4 now that there's a tiny off reader sized hole in my life, was that river crossing undertaken in 4 low or was it better to rely on front wheel drive to paddle Pongo along?
The Pajero was RWD when not in 4 wd, great wee toy but, exiting a muddy track onto a surfaced road made it somewhat too oversteery 'til the front wheels were dried out.
What weight these heavy skid plates? What ive learned rock sliders are a nice must have protect your door sills.
With the modifications I have done it probably is about 20KG
Add a couple of LED lights to the front of the roof rack and a couple to the rear. Low power consumption but high light output.
That’s the next upgrades! Will do a video of that next month
WOW!! Great!
Thanks!
Bravo.
that hole in the air tube in the engine bay will let water in. why do you think it wont ? how do you prevent engine oil getting into the river ?
It would need to be submerged in water for a very long time for it to fill up enough to create a problem. So far to date I have not had any water get in post filter.
Brilliant
Thanks !
Hello, I need to put 20 millimètres spacers at the rear of my 169 4x4. Do I need to remove the rear diff to do it ? Could you give me some explanations please ? Many thx !
You can buy rear spring spacers. These sit ontop of the spring.
No need to remove the diff, just the dampers and springs
Couldn't you put a small turbo to the 1.2 engine?
The ECU would not accept it .. unless I got a new custom ECU which would have cost a lot
@@PTP4X4 Oh.. so you need custom ECU?
I asked because there are some videos on RUclips with Panda and turbos
@@PTP4X4 Maybe at the beginning with a diesel model and 4x4?
Ever consider putting a 1.3l multijet In pedro?
I’m not a fan of the 1.3 for off roading. There is little low down power. But maybe with a remap it is better
mantap bang
Please, what size is the snorkel tube?
What are the insurance implications of the 100 hp swap?
You just have to tell them and they adjust your premium
I loved it until I saw what you'd done to the 100hp...I felt like I needed to show loyalty to the 100hp as I own one
I know .. but it was in a very poor state .. so just think of it as one panda saving another ! And it will make yours more rare and help it become a future classic 😂 joking aside it was a shame .. but I will be selling the parts to support other 100HP pandas
@@PTP4X4 what state is the drivers seat in?
I'm the proud owner of a 100hp and I really can't see such a rare and historic vehicle treated like that. Please do something to resurrect it. The 1.2 8 valve can get up to 100 hp with a remap and some work on the heads, as evidenced by Formula Junior cars in italy.
Unfortunately the laters cars with an ECU are not remappable .. I looked and tried every option and unfortunately it could not be done.
@@PTP4X4 How unfortunate, my heart weeps.
Pomigliano d'Arco, one.
Solihull, nil. 😂
Did you go back to tow that P38 through the river, or was the weight of its owner's electrics based anxiety too much for Pongo to haul.
And in 2024, we find that Fiat's are actually really reliable, whereas - sadly - JLR are averaging one breakdown per week, if we're to believe the social media relating to the split new JLR vehicles.
Oh the irony of that P38, especially if it's blessed with the Diesel engine, being almost certainly more reliable than new RRs.
Ahhh, what a shame.
MPG?
I have just made a new video which includes running costs
@@PTP4X4 I better watch it then....Might as well give you a sub :)
Hi Pedro, please can you help me? My rear drives are not working. I removed the electro-pneumatic valve and tested it at 12V to see if it worked, and it lifted the valve upwards (which I assume is working). We changed the oil, but it still doesn't work. Nothing can be heard in the differential, and the driveshaft rotates normally without any strange sounds. Model is Fiat Panda 169 4x4 1.2 51KW. Do you know what happens? Thanks!
Hi! Hmm.. that does sound strange. I would think it will be the viscous coupler itself that is not working. The electric valve may be working, but if the viscous coupling itself is not working it will not engage drive. That is the only realistic thing that could be at fault
@@PTP4X4 I don't have viscous coupler(if you mean on this www.fiatforum.com/attachments/2431d8ff-fa37-4954-b972-05ca86288d01-jpeg.421576/) my model look like this (img.7zap.com/images/oem/fiat/Imgs/images/2B/2B92DB26B3CE8FFAA5E451AFE2DDE098.png). Thanks for answer!
You will have a mechanical coupler which is activated by that switch. I would think that is what has failed
@@PTP4X4 Are you saying that if it 'slipped,' the drive won't work? I wasn't aware of that part. I'll change it and let you know the details. Thanks a lot, Pedro.
How do you turn on the spotlights?
Forgot to show the switch but it’s on the dash
how much is clirens ?
Not sure what you mean
ground clirens
Bad Ass Fiat , have almost to be matte Black 😉
IMMEDIATELY TALK TO INEOS … LISTEN TO ME…. INEOS…. TALK WITH THEM…RIGHT MOW….INEOS….TALK TO THEM …. 🏆🏆🏆🏆🏆🏆