10.1 Android Touch Screen Car Stereo Install [Wiring and Mounting]

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 322

  • @blobwiggle
    @blobwiggle 4 месяца назад +3

    I used this video to help me install into my 2016 Scion iM. It’s similar. The way you mounted it really helped. A lot of the videos don’t explain it well like you did. Thanks

  • @johnnylaw6877
    @johnnylaw6877 11 месяцев назад +2

    Whats up brother here in New orleans and yea I bought this radio didn't know how to install but after watching your video im confident I can do it myself now so thanks again it's almost mardi gras time here so I'll eat some king cake in your honor brother thanks ...

  • @harisshahid5894
    @harisshahid5894 Год назад +7

    The occasional humor was greatly appreciated. The only reason that compelled me to leave this comment.

  • @venerican3736
    @venerican3736 2 года назад +3

    Thanks 🙏🏼 Daniel! The emphasis’ on the orange cable got my like comment and follow! It had been driving me nuts!

  • @extrememod_ahu
    @extrememod_ahu 3 года назад +14

    Thanks for the video. I think it could be worthwhile to mention how to connect this head unit on your desktop, as with any computer - you might want to properly configure it before putting in your car.

  • @onlyinaustraliago1604
    @onlyinaustraliago1604 3 года назад +9

    Life saver. Great help in every detail.

  • @powellfletcher8651
    @powellfletcher8651 3 года назад +1

    oh yeah , I too have the same unit and looking forward to its use(Binize & Eonon)

  • @ydeardorff
    @ydeardorff 3 года назад +13

    Beware of your heater vents. It can cook the screen

  • @rook-tv
    @rook-tv 2 года назад +1

    Good vid. You know a lot of stuff.

  • @dragonext2001
    @dragonext2001 4 года назад +4

    I just purchased a corehan 10.1 inch android radio. Thanks for the video. The mounting was very irritating as its basically impossible to install it with brackets and the dash cover. Very helpful video for that. Unfortunately so far I'm not as impressed with mine. For some reason bluetooth didn't want to connect at first and the radio doesn't allow downloading Netflix or Disney plus which is needed for long trips with the kids. Also found even with mirror link to my phone by usb it still wont play video on it from those apps on my phone which is very irritating. Even the movies I purchased on Google play wont work. I'm beginning to wonder if I purchased junk. Well glad to see your have purchased a good one. Keep up the good work and the videos. Maybe I'll find something useful on mine by watching your videos with yours.

    • @joshbrowning3488
      @joshbrowning3488 4 года назад

      You were able to get mirror link to work on it??? How did you do that??

    • @dragonext2001
      @dragonext2001 4 года назад

      @@joshbrowning3488 the mirror link works by connecting your phone to the usb cord that's connects onto the back of the radio. You also need to use a app called EasyConnection. I found it to be alittle pointless so I dont use mirror link. After contacting the maker Corehan they told me the website to use in order to download and watch Netflix and others. Seems to work fine but the radio is a bit slow so I only use it when taking the kids on a long trip. Otherwise I just use my phone on my lunch breaks.

  • @jeffmcewan1
    @jeffmcewan1 Год назад +2

    Glad to see I wasn't the only one looking at the four giant screws in unthreaded plastic holes trying to figure what the deal is.

  • @teched9956
    @teched9956 2 года назад +1

    Thanks for the video.
    Looking for the follow-up video on the rear camera install.
    Could you post the link please.

  • @Yuecai_carAndroid
    @Yuecai_carAndroid 3 года назад

    We have the best android screen,maybe we can build the business relationship

  • @cody4128
    @cody4128 3 года назад +2

    Interested in the tire pressure monitor install.

  • @whiteboy12911
    @whiteboy12911 3 года назад +8

    Great job with the installation I got the same radio it works perfect

    • @pascualorzaezcarretero20
      @pascualorzaezcarretero20 3 года назад

      Still perfect? I am thinking to buy the same one. Thanks

    • @yanrongning9735
      @yanrongning9735 2 года назад

      ​@@pascualorzaezcarretero20 did you buy it ? my factory's manufacturing car head units . 4/64G , 6/128G. carplay and everything. if you still in need of that feel free to contact me.

    • @pascualorzaezcarretero20
      @pascualorzaezcarretero20 2 года назад +1

      @@yanrongning9735 not yet

  •  3 года назад +1

    Very good work.

  • @PNHassett
    @PNHassett 2 года назад +1

    Really want to know about the rear camera wiring. I have a 7:inch unit that is pretty much the same thing.

  • @daijoubu4529
    @daijoubu4529 2 года назад +2

    Some sellers have premade harness, much less trouble

  • @cleatharp9564
    @cleatharp9564 Год назад

    Really could use the rear camera vid. Mine came with an extra connector with a video line and 2 blue wires. Oh, and another plug with like 12 video/audio connectors.

  • @gregoryclavell7847
    @gregoryclavell7847 Год назад +1

    thank you bro, very helpfull, now you have another fan from Puerto Rico,,,thanks again,.

  • @bingybeats189
    @bingybeats189 Год назад +1

    So the USB port connects to the back of the unit? Then you have to route it where you want the connector cord to be accessible?

  • @owulokingsley2405
    @owulokingsley2405 9 месяцев назад

    Thanks Dan, my back camera flipped upside down whenever I put the car on reverse: kindly help me out with solutions, thanks 🙏

  • @samsakaria3927
    @samsakaria3927 2 года назад +1

    Thanks for showing me quite easy and simple thanks man update awesome

  • @boldford
    @boldford Год назад

    Did you do a follow up to this video? Can you let us know the link.

  • @karinamorales7876
    @karinamorales7876 Год назад

    i have an acura tsx 2004 and i decided to intall another screen since the original one was very expensive for me and turns out that it is bigger,it works for the frame that car brings,but the frame has a plate which does not let me pass the cables i thinks if i cut it,it would stay,but i didn dare do it ,i could only glue around it so that the screen with the frame would hold better,as i mentioned,itś bigger,but that alone prevents me from installing it...

  • @lingdinh4510
    @lingdinh4510 3 года назад +1

    Ive got a hilux in Australia. I installed one but the reception on the radio is ordinary. The blue wire with the bit of coax is not used on mine. Do I need to power up the blue wire?

  • @powellfletcher8651
    @powellfletcher8651 3 года назад +1

    YOU STATED THAT YOU ORDERED DIFFERENT PARTS FOR IT , COULD YOU PLS LET US KNOW WHERE YOU ORDERED THEM THANK YOU .....on another note your video is awesome demo I have a dodge Dakota and really having problems with attaching the unit to dash bezel....

    • @danielmid6022
      @danielmid6022  3 года назад

      Hi, which parts are u needing? I thought I put links to everything I ordered. Lmk if not I'll try to help out thanks!

    • @powellfletcher8651
      @powellfletcher8651 3 года назад +1

      @@danielmid6022 how about the rear camera install, as the RCA supplied for rear camera has two wires connected that attach to the stereo , also if there is a better manual, love your video just missed the setup the rear camera so wondering when you will video the rear cam era install thanks

  • @WARRIOR5699
    @WARRIOR5699 10 месяцев назад

    Mine has a ticking sound and slight static noise that doesn’t go away how do I get rid of that?? Also key one and key two wire splice to what other wires for the steering wheel controls to work ??? I have the basic GM radio that You’d find in late 2000’s GM vehicle

  • @AaravMdliar
    @AaravMdliar 8 месяцев назад

    Hey man love ur videos!!
    Just wanted to know if it is better to install a sub in a factory stereo or android headunit.
    Btw I have a mitsubishi pajero with a factory Rockford soundsystem.

  • @Th3GaMb3r
    @Th3GaMb3r 2 года назад +2

    Where’s the other videos!

  • @powellfletcher8651
    @powellfletcher8651 3 года назад

    hey Dan , you've helped me in the past and I hope you can now ...hjow can the font or printing be darken , I tried to change some things on screen but can see print because it is so "fair" almost disappears what can I do ????

  • @guess08who
    @guess08who Год назад

    Where did you connect the ground wire ? The black wire with something round at the end

  • @HIGHROLLAZAUTOCLUB
    @HIGHROLLAZAUTOCLUB Год назад

    Can you hook up an iPod classic to this screen to see if the playlists shows up like on the iPod?

  • @deadonentry
    @deadonentry 2 года назад

    Where to plug. Gnd wire. My old radio had this from antenna, but there is also a black in the iso?

  • @samsonbuko8789
    @samsonbuko8789 3 года назад +5

    What cable goes on key to turn of key and then stereo will turn of as well

    • @KayOhKayy
      @KayOhKayy 3 года назад

      Did you ever find the answer to this

    • @Vaga-Bard
      @Vaga-Bard 3 года назад

      Its usually a yellow wire that says ignition i believe.

  • @michaelvandenbosch9790
    @michaelvandenbosch9790 Год назад

    Hey thank you! Mine does not recognize my steering wheele buttons when i try to bind them through the system. Got any ideas what it could be?

  • @anneg8016
    @anneg8016 2 года назад

    I just got this does it come with plug in play cord for my Mercedes Benz

  • @DesertEagle90
    @DesertEagle90 2 года назад

    I need help I install my radio no problem but however I’m not getting any sound! Also steering wheel control not working.. Any possible reason or any solution?

  • @tremaynearcher6653
    @tremaynearcher6653 2 года назад

    What type of add on are you referring to that shows the guages? I can't seem to find one.

  • @onedegreewest9303
    @onedegreewest9303 2 года назад

    Thanks Daniel for the tutorial. Can secondary USB cable be purchased as mine only came with one?

  • @MikeEbbrell
    @MikeEbbrell 10 месяцев назад

    Hi Daniel
    My son has just carried out an upgrade on my 2012Mondeo titanium x sport
    all seemed okay until we tried to adjust the climate control there was no reaction on the touch screen do we need a interface
    the unit is a
    Artsxw 9.7 Inch Car Stereo Bluetooth Touch Screen Car Radio For Ford Mondeo MK4 2011-2013 Android 10 Head Unit GPS Sat Nav Support CarPlay Android Auto Wifi 4G Mirror Link TPMS Built-in

  • @djadrian9318
    @djadrian9318 9 месяцев назад

    Everything works on my Android radio that I just bought except it will not hold the radio station memories and it was full plug-and-play I didn't have to mess with any except for one wire which is the backup camera wire do you have any suggestions what could be happening

  • @juniorsainvilma
    @juniorsainvilma 2 года назад

    Hello sir .... hope you are doing well.
    I love the android radio car..I am in Haiti 🇭🇹 can you help me to get one and with everything it comes 🙏🏾🙏🏾🙏🏾

  • @mattcampbell6423
    @mattcampbell6423 Год назад

    Did you connect the ground wire from the head unit to the ground wire from the harness? Or straight to metal in the vehicle

    • @danielmid6022
      @danielmid6022  Год назад

      My unit had a good ground already so I used the original. If u can make a better connection to the cars frame that's the way to go

  • @syedalisaqib
    @syedalisaqib 3 года назад

    Hello Daniel
    I have the same stereo system and want to install front camera too.
    please guide me how to connect in this android? i have "cvbs1" and "cvbs2" RCA connectors and a video out too. i have connected with cvbs1 but no camera output result.

  • @omniken66
    @omniken66 3 года назад

    I have the same radio and if you don't mind could you help me out with something? I connected it but only get sound from the radio and when I connect my bluetooth from my phone there's no sound? It says you don't have to connect the plue power antenna wires but if I don't connect them I get no sound at all? If I do connect them together I get radio sound....Someone suggested a bypass and to connect the blue wires to the red together and actually that does work ...the only thing is the radio wont shut off when I shut off the engine and open the door....which caused my car battery to die...It's a great unit and I love it but I'm sure its just a matter of me having one wired crossed the wrong way.....And If I didn't mention I don't have any aftermarket amp just factory from a Pontiac Grand Prix 2006

  • @ahmedabbas8065
    @ahmedabbas8065 3 года назад +1

    After I connected directly cam, my USB cannot be read so as my mobile..only dvr cam, how to fix

  • @novemberRainSD
    @novemberRainSD Год назад

    which one is the ground wire? . my stereo makes static noise when tuned to local radio . but works fine when i stream songs on Bluetooth or youtube

  • @jemho7964
    @jemho7964 2 года назад +1

    hi, did you face any issues with your usb1 or 2 not charging and undetected?

  • @naniflores9381
    @naniflores9381 Год назад +1

    Hey Daniel did you ever get a chance to install the backup camera and gps?? I just bought one for my H3 trying to install it

  • @edmondharrold6630
    @edmondharrold6630 2 года назад

    What's the name of real time monitoring system that you spoke of

  • @somerabbit
    @somerabbit 3 года назад +4

    For the radio antenna do you use the one that was plugged into the original stereo or the one attached to the new wiring harness?

    • @CINORX
      @CINORX Год назад

      That usually depends on your model and yr car. Most of the time an adapter might be used for the antenna.

  • @taco_jebus6294
    @taco_jebus6294 3 года назад +9

    Hey, Love this video. I got lucky on my vehicle already having an aftermarket head. connecter worked fine, and i enjoy the unit, although I acknowledge its limitations. Did you ever figure out the backup camera? having trouble figuring out the connection, having tried multiple routes with no success and no contact from the seller =/

    • @matthewdeck3246
      @matthewdeck3246 3 года назад

      The harness should have a reverse trigger wire that needs a reverse signal wire from your vehicle to power the camera on. You will have to find out if your vehicle has a negative or positive trigger on the reverse signal and locate the circuit and tap into it.

  • @jackchan185
    @jackchan185 2 года назад +1

    Pretty cool

  • @risting-pc-service5150
    @risting-pc-service5150 3 года назад +1

    For bmw e90 radio parking sensors wire? how to find ?

  • @tonydonoghue3303
    @tonydonoghue3303 3 года назад

    Hi bud....... what make is the unit and where to buy it...loved the video

    • @danielmid6022
      @danielmid6022  3 года назад +1

      Hi, there is a link in the description to the exact unit. Thanks!

    • @tonydonoghue3303
      @tonydonoghue3303 3 года назад +1

      @@danielmid6022 cheers buddy

  • @tonezone99
    @tonezone99 11 месяцев назад +2

    My colors don't match so it doesn't turn on idk there's colors missing

  • @jorgebicho2216
    @jorgebicho2216 2 года назад

    Hello, by mistake a plugged the outlet that is supost to go on the canbus on the radio and after that it shut down and doesn't turn on anymore already whit the canbus well connected

  • @commonwealthclick7210
    @commonwealthclick7210 4 года назад +3

    Just purchased the smaller version and my passenger speakers front and rear is not working. Wires are hooked up correct

  • @brandini9190
    @brandini9190 3 года назад

    Hey I have the same radio, have you installed the back-up cam? I can not figure out how to get it wired up in the back of the unit

  • @jayasankarvg9728
    @jayasankarvg9728 2 года назад

    Is it possible for maruti Suzuki ertiga 2022 model

  • @peter555peter1
    @peter555peter1 3 года назад

    Thanks, man!

  • @MarkBart66
    @MarkBart66 2 года назад

    I'm having a tough time finding a dash kit to use with this 10" screen I have a 2001 Expedition. Any suggestions would be appreciated. Great video btw !!

  • @sandicondos95
    @sandicondos95 3 года назад

    The USB - how do they get installed? Installed to the back of the unit .. system doesnt register the phone plugged in

  • @TheRealBigC00per
    @TheRealBigC00per Год назад

    What about the white and blue I have solid blue going to solid blue but nothing to connect white and blue

  • @doumpe
    @doumpe 2 месяца назад

    Good evening, because I just installed your product in my car, it is experiencing interruptions during audio playback. At intervals, it starts working, but then the sound keeps cutting out continuously. Is there any way to resolve this issue?

  • @KenChung.
    @KenChung. 3 года назад +10

    Hey Daniel, Did you do a follow up on the back up camera install?

  • @joecrush1118
    @joecrush1118 Год назад

    Do you know the actual make and model of the radio? Do you know the processor that's running the Android radio I'm looking at a UIS 7862A just want to know if it's the same, thank you.

  • @3dmodelinghamid238
    @3dmodelinghamid238 3 года назад

    Hello Daniel, how are you, can you please help me for latest updates for T3 K2001n files?

  • @CarlosmataCarlosmata
    @CarlosmataCarlosmata 2 года назад

    Hey I was wondering if you could help me I have color to color I can hit a bump in the road and my screen goes black but my radio still plays sound any ideas ??

  • @glyndencross2177
    @glyndencross2177 3 года назад +1

    Can this unit be installed on a 2010 Ford Escape

  • @eliyaben9277
    @eliyaben9277 10 месяцев назад

    I'm trying to connect my car sterio wires to the android tablet but unexpectedly I found the cable to which I'm supposed to connect the wires is cut off! Please can you advise me what i should do.
    Thank you

  • @sirmichael7619
    @sirmichael7619 Год назад

    do u have any problems with it blocking your air vents?

  • @myshawmail
    @myshawmail 2 года назад +12

    Did you ever do the video for the back up camera install?

    • @juliosandoval8244
      @juliosandoval8244 2 года назад +4

      That's eazy you tap in the rear taillights and run video wire towards the front.

    • @lachavez7349
      @lachavez7349 Год назад

      @@juliosandoval8244 how exactly bro? I'm about to do mine 😭

    • @juliosandoval8244
      @juliosandoval8244 Год назад +4

      @@lachavez7349 the camera comes with 2 red wires u putt them together and run them to your reverse light on back of car.use a blade and cut a piece of the shield and do military splice.use power and ground from the reverse light.than run the yellow rca from the camera all the way to the front.that rca cable should have a red wire for power and that wire goes to the reverse wire on radio behind it on aftermarket unit.with factory radios is diffrent

    • @lachavez7349
      @lachavez7349 Год назад

      @@juliosandoval8244 damn bro I appreciate you replying & giving me all that info, I'll keep you updated here shortly on how it goes 🙏🏼

    • @juliosandoval8244
      @juliosandoval8244 Год назад

      @@lachavez7349 Simon anything u need hit me up i can guide u make it eazy on you

  • @phutranthien186
    @phutranthien186 2 года назад

    Great video Daniel! I’m currently having one just like this on my car. But after I forgot to turn off my lights and the battery death so I had to give her a boost then the head unit stop truning on. What could be the problems??

  • @justgreencars8907
    @justgreencars8907 3 года назад

    i m looking to install this on my prius plus 2014. Any advice bro? what will i have to buy from where?

  • @deshmoney4143
    @deshmoney4143 Год назад

    Can’t finger out why mine won’t power on all colors connected but red wire frm car end what do I need to connect the red wire there isn’t one on the radio end

  • @doriginalbigmomma4129
    @doriginalbigmomma4129 4 года назад +1

    Does video work without connecting any wires to the frame of the car? And where did you connect the ground wire to the frame or together ?

  • @jbriant29
    @jbriant29 Год назад

    So did you never make the TPMS video, @danielmid6022? Didn't find it on your page....

  • @qlaseakcashuel2088
    @qlaseakcashuel2088 2 года назад

    What's up boss I got this today from someone on FB installed for 270.
    They didnt show me how to use it.
    I am unable to connect to wifi or use the GPS.
    Were you able to figure it out?

  • @SIA4TECH
    @SIA4TECH 3 года назад

    How to set the startup logo plz

  • @mortezaashrafi6983
    @mortezaashrafi6983 Год назад

    did you buy the asc cord separately or it came with the headunit?

  • @Afs_shin
    @Afs_shin 11 месяцев назад

    Does this work on a 2007 Toyota aurion sportivo sx6?

  • @syedjawadkarim5005
    @syedjawadkarim5005 2 года назад

    I also installed the head unit but the steering wheel controls keeps on wrongly funtioning after the car is switched on after a while. The volume up key makes the volume go down and other buttons do not perform the tasks they were set for initially with steering control settings.

  • @youtubecommenter8532
    @youtubecommenter8532 Год назад

    So this is without ISO plug n play plug right?

  • @brunom1280
    @brunom1280 3 года назад

    Any idea why the reverse camera input has those two extra wires coming out from the clip?

    • @davidherrera6885
      @davidherrera6885 3 года назад +1

      They are antennas for wifi and Bluetooth I think.

  • @khuramnasar1905
    @khuramnasar1905 3 года назад

    Hello any help please. Mine has stopped working. There's no display and only lights up. Been working fine for two years

  • @antoinenewton2237
    @antoinenewton2237 7 месяцев назад

    Do your controls to the steering wheel that controls volume crusie control ,stop working

  • @jacobstratton
    @jacobstratton 2 года назад +1

    Would there be another reason mine keeps blowing fuses OTHER than the wiring being wrong? I know for a 100 percent certainty the wiring is correct, I've double and triple checked, re-read the diagram and everything. Would like to explore another scenario if there is one. Any advice would be appreciated.

    • @danielmid6022
      @danielmid6022  2 года назад +1

      A cut or knick in a positive wire that could be touching metal or other wires will cause fuses to blow. Make sure no strands are sticking out at any of your connection points

    • @jacobstratton
      @jacobstratton 2 года назад +1

      @@danielmid6022 that was literally the second thing I checked on all of my connections, but that's some of most sensible and logical advice I've received so far, thank you sir. It could be that specific unit I bought was faulty from the manufacturer to start with.

  • @corylieberman6390
    @corylieberman6390 3 года назад +1

    Can someone help with the connections? I have a ford fiesta 2001 1.3 and idk what adapter I need

    • @leonardosanto4116
      @leonardosanto4116 3 дня назад

      Did you ever find out cause I have a Figo and it should be similar

  • @enlightenedartisan
    @enlightenedartisan 3 года назад +2

    Hey can I ask where did you get your harness from? I've just brought android tablet stereo too but I'm totally stuck I would be able to crimp it if I knew which adaptor I needed but the WiFi cable is a plug but my car doesn't have a connector to put it to?
    Thanks love the video

    • @memesyandhorrorshorts
      @memesyandhorrorshorts 2 года назад

      U can install without a harness but only if ur comfortable with splicing into ur cars harness u can always extend the wires with aftermarket wires if they match colors and all that but yeah

  • @luisandrade5138
    @luisandrade5138 3 года назад +1

    My lights don't turn on for the buttuns

  • @BTL3.0
    @BTL3.0 4 года назад +5

    How long is the boot time?
    Does it go into sleep mode when you remove the key? When you turn the car on later, does it boot up from cold boot again or go straight into where you left off after you remove the key from earlier?

    • @taco_jebus6294
      @taco_jebus6294 3 года назад +2

      Mine loads up instantly after the first install. I think while the vehicle isn't running it must use the battery connection to enter a typical android "sleep" mode. after unplugging and plugging in the main wire harness a few times trying to figure out my backup cam, I noticed it had to boot android every time. But, once its installed and you have everything the way you want it, it wakes up with the ignition pretty quickly.

  • @gerardolopez277
    @gerardolopez277 3 года назад

    Hey bro did you ever figure out how to connect the camera? Reason I ask is I got the same thing, hope you can make a video

    • @muns2623
      @muns2623 3 года назад

      I have the same unit, did you figure out the camara? I can help

  • @jessemartinez9561
    @jessemartinez9561 3 года назад

    What does this radio have as far as audio out / video out? I have headrest monitors that have you common red, white, yellow for video from the head unit.?

    • @danielmid6022
      @danielmid6022  3 года назад

      I'm not doing any video out other than the backup camera. But I believe it has RCA video out

  • @arifpatel3014
    @arifpatel3014 Год назад

    I received my head unit today so I found your video interesting and informative.
    Just a quick question though...
    Those wires that you attached together, which other wires did you actually connect them to?
    I only got one set of wires which are loose from the other end so I wasn't sure what they are attached to.

  • @andrestudivant8640
    @andrestudivant8640 4 месяца назад

    Equalizer only works on video not radio why please help

  • @michaelfloyd4823
    @michaelfloyd4823 2 года назад

    Do I need a single din kit or double?

  • @qqq215
    @qqq215 11 дней назад

    Mines came on. No sound 2004 qx56

  • @chadybradshaw6878
    @chadybradshaw6878 3 года назад

    Yeah if you would explain why you were connecting the wires together right there people might have got it but I don't know what the brown wire goes to or the green wire or the orange wire or the pink one iv watched fifteen videos