Need More?? Here is the link to the Loadout video for this TechMCT! Don’t forget to subscribe for more awesome tool content!!! ruclips.net/video/_iU2fiRZVwQ/видео.html
Sadly, your power bank in your discription is no longer available 😒 I really wanted to do exactly what you have done there. Except, mine would be lighting my XXL bag..
Oh! I’ll have to go hunt up another. Pretty much any of them will work it’s just nice to find a small round one that will fit in the screwdriver slots. A larger one with more options would be fine too it just may need a bigger slot in the bag.
Have this bag 3+ years and that is a must! just got back to work after an injury sidelined me for 8-1/2 months now i got another project to do, lol- looks like this just got bumped up a notch. 30+ years Refrigeration/HVAC Tech veto bags are the best!
Can u do a test on engraving tools im thinking of getting my tools like my side cutters engraved so it doesnt walk away on its own, especially when working with other techs. great video Really liking the light. i will put that idea into my own uses
Awe-freakin-some! You got me smiling like Hey Kool aid! Dude. I was smiling the whole video! I’m going to do that to my TechPAC and My other larger veto bags. This video made my day! You’re on my Christmas list now!!
@@MillisConstruction Army tek wizard v3. It floods light instead of focusing a beam. Has a magnetic base if you want to attach it to something for a stationary light. Basically water proof too. Rechargeable as well.
I could be wrong, but I think you have to be careful how much you bend on these lights, cause I hung some around my building and I overbent a section and had sections that no longer worked so they are fragile in my experience.
Ill have to look into that, it would take a very short led strip to do that one for sure with only one side. How’re you liking your TP-XL? Did you see where Veto is planning to come out with a TP - XXL version now 😅
@@MillisConstruction I tried the XXL, it lives up to its name -too well, I ended up returning it because it was too big and heavy. I hope they eventually move the V-Swap system to all their bags
So far so good! I’ll be honest I haven’t recharged it yet. They must not pull much juice. This is just Chinese doo dads though so be very aware of that lol. Quality varies 😅
Brilliant . Did you put the glue on the back of the strip and press against the bag . Or did you put an oversized blob on the face of the strip and allow it to overhand the sides making it stick that way ?
Kind of a little of both. Put some behind and press it into it is Best But you’ll want a tool handle or something to do that with as it’s pretty hot! Touched up some on the edges with it also. It’s been at work with me since this and it’s still in place 😁
Need More?? Here is the link to the Loadout video for this TechMCT! Don’t forget to subscribe for more awesome tool content!!!
ruclips.net/video/_iU2fiRZVwQ/видео.html
How is this light working for you after all this time? That power bank still working great for you? Thinking of getting this..
didnt know i had an issue with tool bag lighting but thanks to you i now have that problem and it will be fixed
😎🔥
If the light bar isn't robust enough, could run it inside clear tubing.
Strong work right there, I'm about to light my bag up now! Thanks, now a subscriber.
Great to have you 😎
Thanks for watching!
Your a damm genius 👏 just purchased my veto LC Bag, today gonna put those same lights in mine.!!!
They’re just cool! I didn’t expect them to turn out that bright but wow. I need to do them in my LC bag too.
Sadly, your power bank in your discription is no longer available 😒
I really wanted to do exactly what you have done there. Except, mine would be lighting my XXL bag..
Oh! I’ll have to go hunt up another. Pretty much any of them will work it’s just nice to find a small round one that will fit in the screwdriver slots. A larger one with more options would be fine too it just may need a bigger slot in the bag.
@@MillisConstruction yes. Thanks for your videos! You're doing a good service for the tradesmen of America!🇺🇸
I think you need a bigger hot glue gun 🤣
Dang thing needs it’s own tool bag 😂
Have this bag 3+ years and that is a must! just got back to work after an injury sidelined me for 8-1/2 months now i got another project to do, lol- looks like this just got bumped up a notch. 30+ years Refrigeration/HVAC Tech veto bags are the best!
Can u do a test on engraving tools im thinking of getting my tools like my side cutters engraved so it doesnt walk away on its own, especially when working with other techs. great video Really liking the light. i will put that idea into my own uses
Making one for my tp-xxl but going to make it run from my m12 batteries
That’s a great plan
@@MillisConstruction I posted the video of it on this channel if you wanna check out how I did it.
I gotta sub based off that
What a genious idea ! And it could also be applied in to any other tool bag/case/box.
That turned out much than I was expecting!!
Pretty handy in a dark spot!
Mamma mia che schifezza!!!!
it is fucking cool
How about I just send you my bag and about $ to light my bag up😂😂😂 “C’mon man”
Pretty dang cool isn’t it 🤣 I had to do it lol
That is so awesome 👌
Awe-freakin-some! You got me smiling like Hey Kool aid! Dude. I was smiling the whole video! I’m going to do that to my TechPAC and My other larger veto bags. This video made my day! You’re on my Christmas list now!!
Such a cool project! I’m glad you enjoyed it 😁🔥
I’m definitely doing this cause I work in the dark all the time
Very cool. It’s a solution looking for a problem! 😅
Great idea and video!! ... Maybe next tme you can try heavy duty velcro straps and you and install in spots...
I clip my pics pencils on that top loop piece keeps them safe lol
I knew there’d be something 🤣
Nice job - thank you for showing us. Great video...
Would love to do this, but I'm always wearing a head lamp lol
Which headlamp do you use?
@@MillisConstruction Army tek wizard v3. It floods light instead of focusing a beam. Has a magnetic base if you want to attach it to something for a stationary light. Basically water proof too. Rechargeable as well.
Yup doing this to my blackout!
Damn I was thinking the same thing!
Well than you’ll have a White Out
Might do this for my non tool bag,
Can you compare the mct to mc
Great video👍
Thats pretty cool!
I gotta do this now
Brilliant! 😅
I ordered the exact light strip and battery and the light strip went 80% out in the first few days. Don't buy these crappy Chinese lights...
Mines still working but I could see that happening for sure. They’re super cheap 😅
I could be wrong, but I think you have to be careful how much you bend on these lights, cause I hung some around my building and I overbent a section and had sections that no longer worked so they are fragile in my experience.
Cheap as they are. Could of bought a few.
Can you try and figure out how too do this with the Tp-xl? Love the video keep it up
Ill have to look into that, it would take a very short led strip to do that one for sure with only one side. How’re you liking your TP-XL? Did you see where Veto is planning to come out with a TP - XXL version now 😅
@@MillisConstruction I tried the XXL, it lives up to its name -too well, I ended up returning it because it was too big and heavy. I hope they eventually move the V-Swap system to all their bags
Ok, this is cool! Good job. 👍🏼
Thanks! It was a cool project 😄
Awesome project! How has the lights been holding up?! Approximately what is the run time of the lights with that pack?
So far so good! I’ll be honest I haven’t recharged it yet. They must not pull much juice.
This is just Chinese doo dads though so be very aware of that lol. Quality varies 😅
Brilliant . Did you put the glue on the back of the strip and press against the bag . Or did you put an oversized blob on the face of the strip and allow it to overhand the sides making it stick that way ?
Kind of a little of both. Put some behind and press it into it is Best But you’ll want a tool handle or something to do that with as it’s pretty hot! Touched up some on the edges with it also. It’s been at work with me since this and it’s still in place 😁
This is so cool