Does the hull have glued joints that are held together solely by chemical adhesion or are there joints held together with mechanical fastners and sealed with adhesive . I didn't think polyethylene could be glued .
Thickness is 10 to 40 mm. We cut the plates with cnc engine according to model and curves. For more information; please send e mail to kemal@planetboat.com.tr and metin@planetboat.com.tr
@@janjandraper9378Yes it is possible. Please share your design with us and let us dwell on it. You can contact us by mail kemal@planetboat.com.tr metin@planetboat.com.tr
Hi hdpe is resistant to ice and frost. It' Service temperature is from -50 to 80 degrees. Thicknesses are as below at our boats: Keel: 40 mm Engine foundations: 100 - 120 mm Shell expansion: 15 mm Main deck: 15 mm Interior structurals: 12 - 15 mm Bulkheads: 12 - 15 mm Cabin: 12 mm Tanktop: 10 mm Tanks: 10 - 12 mm
great work and great material, I would like to design and manufacture something like this myself. You can suggest a program for designing, if not a secret.
It is not a secret. We use very common programs like Rhinoceros, Maxsurf, Autocad. You can use any of those or other nice common programs like 3dmax, solid works etc
It's fantastic that the industry is slowly moving towards almost fully recyclable solutions for fabrication and boat building Polythene and Aluminium definitely seem to be the way forward at the moment..... (and to an extent ferrous metals as well although ferrous metals do have limitations such as highly toxic paint and anti-foul being needed as an integral part of the system)..... The amount of GRP Boats that will need to be decommissioned at some point very soon producing huge amounts of almost indestructible totally useless waste as they eventually become unseaworthy or completely untenable due to the amount of fuel they consume is going to be a serious problem in the future...... If You Guy's could work on Preferably Electric Drive and or Bio Fuel then That'd Be Absolutely Amazing All Round for Everyone..... Well Done for Leading the way Guys....!!!!!!!! :)
Polyethylene is really no better than wood. It gets brittle within a few years, and has no UV properties whatsoever. HDPE however, is a better choice and can be made cheaply with recycled milk jugs. HDPE has excellent UV properties and can last 20-30 years. But like all plastics, it will discolor over time. It can be painted though.
Cool boats. Nice music by the way ...
Hi
Do you have any model approx 9m, with 2 jet yanmar engine ? And must be able to ship in 40 foot container ?
is this the same as PE-HD (PE-300)?
How good is the penetration on the welds
Mind blowing
Does the hull have glued joints that are held together solely by chemical adhesion or are there joints held together with mechanical fastners and sealed with adhesive . I didn't think polyethylene could be glued .
Polyethylene can not be glued. All plates are welded to each other.
For more information please visit our website.
www.planetboat.com.tr
what is the thickness of the polyethylene sheet used for manufacturing?. How the curved regions produced using thick sheets?
Thickness is 10 to 40 mm. We cut the plates with cnc engine according to model and curves. For more information; please send e mail to kemal@planetboat.com.tr and metin@planetboat.com.tr
@@metinkavakl1347 i want my own design.. is it posible ?
@@janjandraper9378Yes it is possible. Please share your design with us and let us dwell on it.
You can contact us by mail kemal@planetboat.com.tr
metin@planetboat.com.tr
The dimensions of the polyethylene plate used in manufacturing are 1500x3000 and 10 to 40 mm thick. We use polyethylene pipes in wide curved areas.
how thick is this hdpe? and is it resistant to frost and ice on water?
Hi
hdpe is resistant to ice and frost. It' Service temperature is from -50 to 80 degrees.
Thicknesses are as below at our boats:
Keel: 40 mm
Engine foundations: 100 - 120 mm
Shell expansion: 15 mm
Main deck: 15 mm
Interior structurals: 12 - 15 mm
Bulkheads: 12 - 15 mm
Cabin: 12 mm
Tanktop: 10 mm
Tanks: 10 - 12 mm
great work and great material, I would like to design and manufacture something like this myself. You can suggest a program for designing, if not a secret.
It is not a secret. We use very common programs like Rhinoceros, Maxsurf, Autocad. You can use any of those or other nice common programs like 3dmax, solid works etc
You can visit our website for other new models. www.planetboat.com.tr We also have a repair and maintenance service for polyethylene boats.
Thanks, I will study and master
I wish you success in life
Thenks
Hi, out of interest what's the cost of the boat ?
Hi
Could you please give us your mail address? Then we will contact you.
It's fantastic that the industry is slowly moving towards almost fully recyclable solutions for fabrication and boat building Polythene and Aluminium definitely seem to be the way forward at the moment..... (and to an extent ferrous metals as well although ferrous metals do have limitations such as highly toxic paint and anti-foul being needed as an integral part of the system)..... The amount of GRP Boats that will need to be decommissioned at some point very soon producing huge amounts of almost indestructible totally useless waste as they eventually become unseaworthy or completely untenable due to the amount of fuel they consume is going to be a serious problem in the future...... If You Guy's could work on Preferably Electric Drive and or Bio Fuel then That'd Be Absolutely Amazing All Round for Everyone..... Well Done for Leading the way Guys....!!!!!!!! :)
Polyethylene is really no better than wood. It gets brittle within a few years, and has no UV properties whatsoever. HDPE however, is a better choice and can be made cheaply with recycled milk jugs. HDPE has excellent UV properties and can last 20-30 years. But like all plastics, it will discolor over time. It can be painted though.
HDPE is amazing
Hocam hayırlı işler olsun. Fiyat nedir acaba?
Sait Bey. selamlar yapmış olduğumuz tekneler acente botu olarak hizmet vermektedir. 12mt tekne fiyatı 295.000 euro dur
Is this HDPE or LDPE?
Ha hdpe boat
@@metinkavakl1347 Is PE-HD the same as HDPE?
Worst music track on RUclips 😂