Milling and Drilling Machine ZX7032G 400V CORMAK

This machine can be used for drilling, reaming and expanding holes up to 32 mm in cast iron and threading screws up to M12, milling up to 80 mm wide and notch up to 22 mm. It is also suitable for cutting and frontal milling.
Max. drilling diameter in steel / cast iron - 32 [mm]
Max. face cutter diameter - 63 [mm]
Max. end mill diameter - 16 [mm]
Max. thread diameter M12
Table dimensions - 700x190 [mm]
Table feed X / Y - 460/225 [mm]
Distance between the spindle front and the table - 65 - 460 [mm]
Spindle quill extension - 75 [mm]
Distance between the spindle axis and the column - 170 [mm]
Head rotation angle +/- 45 °
Width / spacing / number of T-slots - 12/63 [mm] / 3
Spindle speeds (6 gears) - 95/180/270/500/930/1420 [rpm]
Spindle taper - MK3
Engine power / supply - 0.9 [kW] / 400 [V]
Weight (without the base) - 185 kg
Dimensions (without the base) - 1050x750x1250 [mm]
More:
www.cormak.pl/...

[@Damciu92112]

fajnie na zglizeniu widać jak cały wałek pracuje ... Powinno być jakieś podparcie dodatkowe

[@gabrieletelleri5107]

Complimenti bella macchina....ottimo rapporto qualità prezzo.... Gabriele... adesso la acquisto anche io. A presto.

[@stevecallachor]

Should not the workpiece be supported from below????
Stavros

[@NormanSurgeon]

...I cringed when watching some of the work holding (mal)practices...! 🥴

[@davehyper7835]

thanks just purchased a HK25A. I'll upload a video when i get it set up!

[@hotszot]

a gdzie chlodzenie wodą...

[@andrzejl8451]

Właśnie. Podeprzeć.

Posiadam optimum mh20vl i powiem wam po 8 miesiącach pracy wystąpiła usterka która uniemożliwia dalszą pracę. Tak więc nie polecam marki optimum. Link do filmu z usterką. Zapraszam i pozdrawiam.
ruclips.net/video/mjrxKsMlN3I/видео.html