Best Pro Window Tint Tools 2019 | Not On AMAZON

Поделиться
HTML-код

Комментарии • 76

  • @DetroitTintStudio
    @DetroitTintStudio  5 лет назад +8

    🔥 Recommended Film and Tool List 🔥 bit.ly/2WvWa4K

  • @StrainingDingelberry
    @StrainingDingelberry 4 года назад +4

    I’ve always used the lil chizzler to smooth out a spot where maybe some felt from a gasket got into the film. With some decent heat and some good pressure from the pink chizzler tool it will take care of it

  • @TradeswithNas
    @TradeswithNas 5 лет назад +3

    Hey Matt Can you make a video about window tint sales tips and mobile window tinting tips? It would help me majorly

  • @joebermuda6452
    @joebermuda6452 5 лет назад +1

    Side swiped and tri edge are essential, fusion handles are the best for sure

  • @brianhansen5748
    @brianhansen5748 4 года назад +3

    Question - what is a heat gun for? Ive been watching your tutorial videos, which I love by the way, and I am about to do my first tint job. Ive seen lots of people do a fine job without a heat gun, but yours always look better. Why use a heat gun?

    • @jeffreyg5718
      @jeffreyg5718 4 года назад

      Brian Hansen use a hair dryer instead. 😊

    • @RaffyMaBoi
      @RaffyMaBoi 3 года назад +2

      To shrink the tint so its not flat on curved glass

  • @ManuelCamarena0725
    @ManuelCamarena0725 2 года назад

    Great video. Great Review. What do u think about the orange edge dozer? It also comes with a extended handle.

  • @JackShootsFr
    @JackShootsFr 5 лет назад +4

    Hey brotha when are you going to release the in depth lexen film review that you said you were gonna do awhile back?

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +1

      gahhh I'm not sure yet. I've never done an in depth film review before and it really needs to be somewhat scripted so I don't run on tangents all video lol it's still on my todo list and these comments are always a good kick in the ass. my short answer for now is I like it for the price but I really have to figure out how to test longevity and that hasn't been done without leaving film on your car for over a year. my lamps might give some good insite tho

  • @grisellagaton9529
    @grisellagaton9529 4 года назад

    Love the orange crush.

  • @evokleensteamcleaningdetai9408
    @evokleensteamcleaningdetai9408 2 года назад

    Advise where to buy film, any infor whether ceramic or carbon films

  • @n8te__
    @n8te__ 2 года назад

    Do u need a heat gun when beginning window tint because there sum tht stick no?

  • @glen619
    @glen619 4 года назад

    Hi thanks for the video really good help. One thing i wasn’t sure about if you could clear up, the glass station you have in your shop to put the tint on be installation what thpe of glass is that? Laminated?
    Thanks

  • @lightdark00
    @lightdark00 2 года назад

    Is there going to be an updated version of this?

  • @alanbautista1
    @alanbautista1 3 года назад

    Hello! I’m am new and a are really interested in tinting, I was wondering if you can tell me where you got your cutting board.

  • @luke4518
    @luke4518 5 лет назад +1

    Still waiting for that lexen tint

  • @geom7490
    @geom7490 2 года назад

    do you have a starter bundle tool kit? if you please link i couldn't find it on ur site thank y0u

  • @trualpha8083
    @trualpha8083 5 лет назад

    You got any spare rolls of tint? There's no dealers that I can buy good tint from in Hawai'i and tintdepot won't ship to here. I'm just only trying to do my truck and don't want those cheapo blue walmart tints. Great videos though, keep up the good work.

  • @alastairleung1883
    @alastairleung1883 2 года назад +1

    Not sure if you'll see this, but I noticed Aliexpress stocked some 2 mil ceramic tint for a fair bit less than what Gila goes for here in Canada. Any chance you might be able to test a roll or two out of the Aliexpress stuff and gives some notes on how it compares with the off the shelf stuff you've tested already? Cheers.

  • @bcdoll01
    @bcdoll01 3 года назад

    What tools would you recommend for tinting home windows?

  • @VicBerlanga84
    @VicBerlanga84 5 лет назад

    Awesome video man..very very helpful and i will end up ordering some of the tools

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +1

      Thanks man! glad ya liked the video. these often become much more work than I think when I set out to make it lol if ya pick up some of the tools, let them know I sent ya over!

    • @VicBerlanga84
      @VicBerlanga84 5 лет назад

      @@DetroitTintStudio will do thanks and keep uploading

  • @techep3
    @techep3 5 лет назад +1

    Have you ever used Flexfilm products from Ralph at all, if so what do you think?
    Also what are the chances of having one of those epic events on the northern east coast? I want to go bad but not sure I can swing going down to Florida, I understand it was probably a ton of work to set up so I get it if it's only one time too.

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +1

      yea I am familiar but I have not seen very many good things lately. I actually am going to be cohosting another class on Chicago in March. more details will be available for that in the coming weeks

    • @techep3
      @techep3 5 лет назад

      @@DetroitTintStudio ah ok I was under the impression it's of high quality but obviously don't know for myself so I wanted to ask.
      Ok, sounds good!

    • @derekramos3100
      @derekramos3100 5 лет назад +1

      I use Flex Film Daily and have their Nano Carbon on my personal vehicle. I myself like the film, but then again I haven't used very many different brands. I have a Lancer I'm about to do and the guy has some Lexan pre cuts. Gonna a see how i like it. ALSO I'm from Alabama and so is Ralph. I personally like the fact it's in state so that's my main reason for buying on top of it work well for me so far.

    • @techep3
      @techep3 5 лет назад

      @@derekramos3100I have their nano ceramic and I like it so far but like you said I don't have much experience with much else. It does have a slight bluish low angle haze but it's not bad at all and that comes with the territory I guess with ceramics. Thanks for your info dude!

  • @claudioverissimo7100
    @claudioverissimo7100 4 года назад

    Boa tarde onde consigo essas ferramentas??

  • @joshvaldez8455
    @joshvaldez8455 3 года назад

    can you do an updated Tinting Tools for 2021

  • @Hansaram-7
    @Hansaram-7 3 года назад

    What city are you living?

  • @robertlee4172
    @robertlee4172 Год назад

    5:28...The "shank", is it just me, or does that look like a plastic palette knife? Yup, found in common art supply stores. Like a dollar each. In fact, if you scour the art supply section of the dollar store, you might get lucky and find a set of different bladed ones, 5 in a packet for $3 bucks. Hmmm, while you're at it, the hardware/tool section may have plastic paint scrapers, 10" wallpaper applicators, ice scrapers(in season of course)and all the drop cloths, vinyl sheets and masking tape to cover areas you don't want to get soaked. How about hemp rope wrapped with microfiber cloths, to jam in windshields and back windows?
    Then again, squeegees of assorted sizes available too.

  • @cartintcuencotv31
    @cartintcuencotv31 4 года назад

    very amazing tools... i wish i got one of that..

  • @2fiveKsigns
    @2fiveKsigns 3 года назад

    Hi, I am new to tint, can you send sample of basic tools used in tinting.. thank you

  • @Eazytarget
    @Eazytarget 4 года назад

    What do you do if you use a Scotch-Brite and scratch the window already

  • @JBIRD575
    @JBIRD575 5 лет назад

    Let me know how the square flat out works ???

  • @frederickmiltonravina8662
    @frederickmiltonravina8662 4 года назад

    Can I have some of your tools?huge fan from the Philippines,thankyou

  • @cybernan33
    @cybernan33 4 года назад

    you back glass i think is mercedes w203

  • @josephrodriguez2095
    @josephrodriguez2095 5 лет назад

    What film do you recommend from tint depot to learn with ?

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +4

      If you really want to save some money, start with a 1ply film. you will learn plenty from it,its just a little thin in comparison to what I use. if you don't mind a spending a little extra to get something the same thickness and a lot more comparable to what I use then check out the 2 ply black. it also will last longer if you decide to leave it on your car. I added links to the specific films and we are adding them to me recommendations page soon
      bit.ly/2WvWa4K
      1 ply charcoal
      tintdepot.com/product/eco-charcoal-5-20-35-40-50/
      2 ply black tintdepot.com/product/2ply-black-5-20-35-50-70/

  • @steverowan4278
    @steverowan4278 5 лет назад

    I get the "Shank" in a 3 pack of craft tools from the dollar store.. Use them every single day!!

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +1

      😂 I took out my lengthy rant about where that tool comes from. Art Pallet Knife Set but it works so well!

    • @steverowan4278
      @steverowan4278 5 лет назад

      @@DetroitTintStudio I didn't mean to cause a rant of any kind, I was just putting it out there for others.. No disrespect meant of any kind..

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад

      @@steverowan4278 Noo you didn't cause one, I took my rant out of the video of where they come from lol

    • @dexternjoku5196
      @dexternjoku5196 4 года назад

      @@DetroitTintStudio damn i didnt know that, would you recommend the metal one

  • @gendrosetiawan2376
    @gendrosetiawan2376 4 года назад

    Halo im from Indonesia. im mechanic window film. i need tolls. How do i get that tolls. Pleace.

  • @martink.9442
    @martink.9442 5 лет назад

    The cheap Wagner is the same type like on of my no name China gun. Normally i only use Steinel ;)

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад

      I gotta pick one up but wasn't sure which one. I have one in mind now with fusions new release but could also go with a traditional looking one. What one are you using? does it have a cool down feature?

  • @zuch7696
    @zuch7696 5 лет назад

    they don’t ship over to europe. if i cover all the costs would you be able to ship whatever tool i might need to me?

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +1

      I'm gonna check with them about changing that. I'll update this comment when I have some more info for ya.

    • @zuch7696
      @zuch7696 5 лет назад

      TintStuff thank you

  • @WINGATE14
    @WINGATE14 4 года назад

    Bro, let’s start an apron co. It kills me they’re so hard to find

  • @animefreak55060
    @animefreak55060 5 лет назад

    Any big differences between the black conquerers and yellow conquistadors?

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад

      not much, just made by different companies. If anything the Blue and Yellow conquerer blades seem to outlast the black Conquistador blade

    • @animefreak55060
      @animefreak55060 5 лет назад

      TintStuff I’ll have to test both out, I know the conquistadors are advertised to last longer because of how it’s molded. I guess it’s just a he said she said situation for both companies

  • @jdm_95
    @jdm_95 5 лет назад

    Do you have ur online store? Am trying yo buy some tools

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад

      All the things I talked about in the video can be found here bit.ly/2WvWa4K

  • @lepixel
    @lepixel 4 года назад

    Cheers mate!!!

  • @CaliKuttzClips
    @CaliKuttzClips 5 лет назад

    Thanks !

  • @bigbikemotorcycle6824
    @bigbikemotorcycle6824 4 года назад

    Hi Sir

  • @JBIRD575
    @JBIRD575 5 лет назад

    Sick bro !!!!

  • @cartintcuencotv31
    @cartintcuencotv31 4 года назад

    shout out

  • @shivams6494
    @shivams6494 5 лет назад +2

    You forgot the main part, the film😂

    • @DetroitTintStudio
      @DetroitTintStudio  5 лет назад +2

      that's gonna be a challenging video to figure out. so many things I can say but hard to figure out how to say them. It's needed tho, thanks for watching this one!

  • @parallelalpha
    @parallelalpha 4 года назад

    ah yes, play-doh tools.

  • @IrasLord
    @IrasLord 4 года назад

    💪😃

  • @acostilla78
    @acostilla78 4 года назад

    So you petty much don't like anything 😅