instlled latest rogue master firmware ,then followed ur video everything worked fine apart from i cant find the wifi option on my flipper zero,du you have a link to the firmware ur using please so i can try that as i dont get why its not working .thanks
i have installed marauder using multiple methods but my flipper does not identify the marauder, its as if nothing is attached. does anybody have any recommendations?
I couldn’t figure it out for the longest time. All I did was use the mobile app to download the marauder software onto the flipper. As long as you have the firmware downloaded to the dev board this should work
I was having this issue wifi marauder wouldn’t even show up on the flipper phone app if my flipper was paired to my phone and would show up if I unpaired them if you install momentum firmware I got the wifi marauder files and can use it
Mate! You easily have the best videos on how to do things with the flipper I've found so far. All the others ive found are "Look at me! I have a flipper! Like and subscribe!" You actually explain and in clear detail. Please, keep these coming.
Thanks for makng this guide. I cannot see the Wifi (Marauder) module on my Flipper, i also get a slighly different message after Flashing Marauder to the Devboard. I don't get the "File" entries - the last ones before "Process is completed" Message is "Staying in Bootloader." Any idea why that might be?
When I flashed this I am running Rogue Master firmware, I haven’t tried using this with the standard flipper firmware. Let me know if you can get it to work with the firmware version you are using
Good tip on the USB cable, I have had many people have great success with this video but then some who just can’t get it to work, USB cable is defo a good shout
@@steamlabstech I had this problem too, not matter what combo of holding down the button/how long, nothing worked. I ended up installing Arduino to see if I had better luck that way, when I tried to install it Windows firewall started trying to block an exe called dpinst_amd64.exe, once I allowed it past Windows, it started installing a bunch of drivers for USB connections. After I saw all the drivers load I connected the board and heard the distintc sound of the PC connecting to something, I ran the .bat and it worked perfectly, didn't even need to hold the button down. Just FYI if that means anything to you. Cheers! Thanks for the vid.
I've flashed my devboard but the i dont get the wifi module on the device and whenever i boot my FZ i get the combination of blue, green, red light on the devboard. Other than that the light doesnt get lit up, do you have any idea why that happens?
Are you sure it is plugged in properly to the GPIO pins? I doubt it is the firmware you are running, out of interest, what firmware are you using with the WiFi Dev?
I just completed the same process again and this method still works. I would try again to see if you missed any steps, it is strange that these same steps wouldn't work for you
Absolutely, apps from flipper will always be restricted. I suspect Unleashed will release an updated version very soon. The best way to answer this is try the variations for yourself
You have to make sure that you powered on the Wi-Fi board when connecting it to the computer, otherwise the options won’t appear. Have a look at what I do and what I mentioned in order to get this to work. I hope that helps
instlled latest rogue master firmware ,then followed ur video everything worked fine apart from i cant find the wifi option on my flipper zero,du you have a link to the firmware ur using please so i can try that as i dont get why its not working .thanks
Man, you’re my hero 😄 I haven’t understood the differences and how to set this all up, now I’m fine, thank you!
i have installed marauder using multiple methods but my flipper does not identify the marauder, its as if nothing is attached. does anybody have any recommendations?
broken module
wifi[marauder] isn't showing up for me, im using RM 0.90.1, and havent any access to anything named wifi (marauder)
Same here on 0.91
Same
I couldn’t figure it out for the longest time. All I did was use the mobile app to download the marauder software onto the flipper. As long as you have the firmware downloaded to the dev board this should work
I was having this issue wifi marauder wouldn’t even show up on the flipper phone app if my flipper was paired to my phone and would show up if I unpaired them if you install momentum firmware I got the wifi marauder files and can use it
helped alot, the others didnt say where to plug into!
Mate! You easily have the best videos on how to do things with the flipper I've found so far. All the others ive found are "Look at me! I have a flipper! Like and subscribe!" You actually explain and in clear detail. Please, keep these coming.
Glad to help!
definitly the best video on this tema thaks bro
Appreciate that
Thanks for makng this guide.
I cannot see the Wifi (Marauder) module on my Flipper, i also get a slighly different message after Flashing Marauder to the Devboard.
I don't get the "File" entries - the last ones before "Process is completed" Message is "Staying in Bootloader."
Any idea why that might be?
What firmware are you using?
same problem, i am using 0.88.0 on my flipper
When I flashed this I am running Rogue Master firmware, I haven’t tried using this with the standard flipper firmware. Let me know if you can get it to work with the firmware version you are using
@@steamlabstech I'm using Rogue Master as well.. the WiFi option isn't coming up on the menu.
@@steamlabstechI followed every single step and the Wi-Fi option still isn’t showing up. Any ideas?
My deauthentication isn't working. I followed the steps, but its not kicking me off the network.
Hi. I want that "flipper zero" but i dont know where to buy it.😅
I installed this following the instructions and now the flipper wont turn back on. Any suggestions?
everytime i click on the zip file link, it leads me to a 404 page
Please look at previous comments, it’s been located to the top of the page
Ho, thanks you so much ! The only tutorial wich morked for me !!
Thanks for this vid! I would also note, if flashing and tool doesn't detect dev board it can be poor quality USB cable and to try different cable.
Good tip on the USB cable, I have had many people have great success with this video but then some who just can’t get it to work, USB cable is defo a good shout
@@steamlabstech I had this problem too, not matter what combo of holding down the button/how long, nothing worked. I ended up installing Arduino to see if I had better luck that way, when I tried to install it Windows firewall started trying to block an exe called dpinst_amd64.exe, once I allowed it past Windows, it started installing a bunch of drivers for USB connections. After I saw all the drivers load I connected the board and heard the distintc sound of the PC connecting to something, I ran the .bat and it worked perfectly, didn't even need to hold the button down. Just FYI if that means anything to you. Cheers! Thanks for the vid.
i tried this on my wifi and it does not kick me off my wifi. not sure what im doing wrong.
Mine is just saying "A fatal error occurred: Failed to connect to ESP32-S2: No serial data received." any fixes?
same here did you figure it out?
same
Hold boot and reset at the same time then plug in wait 3 seconds let go of reset first and then boot and ur good to go. Run the flash again
i have flashed and followed same as video but when i go back on flpper i still dont get the wifi option
me neither
same have you figured it out yet
Whenever I scan it does not show anything.
Great video thank you.😊
I've flashed my devboard but the i dont get the wifi module on the device and whenever i boot my FZ i get the combination of blue, green, red light on the devboard. Other than that the light doesnt get lit up, do you have any idea why that happens?
Are you sure it is plugged in properly to the GPIO pins? I doubt it is the firmware you are running, out of interest, what firmware are you using with the WiFi Dev?
roguemaster is the one i'm currently using :)@@steamlabstech
I just completed the same process again and this method still works. I would try again to see if you missed any steps, it is strange that these same steps wouldn't work for you
You can add the duel boot file and flash from flipper. I was having issues with the newer firmwares and that worked for me on unleashed.
Mine's not keeping data on the pcaps for some reason.
im getting this error " Failed to connect to ESP32-S2: No serial data received." and i dont have the app where you have it
Hold boot and reset at the same time then plug in wait 3 seconds let go of reset first and then boot and ur good to go. Run the flash again
i love you@@lexusfixes9958
@@lexusfixes9958 thank you
well job with this video finally i solved my issue buddy :)
Thank you
Is there still benefit in flashing costum firmware even when there is a flipper appstore now
Absolutely, apps from flipper will always be restricted. I suspect Unleashed will release an updated version very soon. The best way to answer this is try the variations for yourself
whenever i try to flash i get a fatal error. then when i try running the software nothing works. what can i do?
Did you ever figure it out?
Not a flipper problem actually. It's stupid windows driver. Download the vsp c++ drivers.
I keep getting 1 2 3 4 5
… why am I getting 5 instead of 4 ?
Could be an update in the firmware since I posted I will check
It doesn’t give me the 1 2 3 4 thing when I run the flash
You have to make sure that you powered on the Wi-Fi board when connecting it to the computer, otherwise the options won’t appear. Have a look at what I do and what I mentioned in order to get this to work. I hope that helps
@@steamlabstech I got it thank you but when I scan to try to deauth a network my Wi-Fi doesn’t show up or the ones I can connect to
I think you need to leave it scanning for longer, do try to check that the wifi board is plugged in properly
I’m getting 1 2 3 4 5
…. Why 5
the zip file is no longer downloadable...
They have now moved the zip file to the top do the page, you will be able to see it was updated 2 days ago
thank you so much
i keep getting error
Can’t find the zip :(
It’s been relocated to the top of the page
#fun && #funny
I like ethical hacking
do yoyu need python