Dude! Your videos are a treasure for old Peugeot owners.. I had the same issue and was praying it’s the fuse rather than the pump. just replaced the blown fuse.. thanks to your video I went straight in and it took me literally 2 mins. Thanks a lot
Thank you so much for such an informative and well presented tutorial :-) Checked my fuse and it had indeed blown. So for the princely sum of £1.24 I've got my windscreen washers working again. So grateful and absolutely made up that I managed to do this myself.
Thank you man, just bought a new pump and your video will be the way I do it. I was scared because people told me that I have to remove the wheel and plastic wheel cover, but obviously I don't have to do that :D
Thank you again! I finally bought a new pump and fitted it today. Couldn't have done it without this video! Managed to bruise both my arms in the process but it still feels like a win Haha x
Thanks for your video, I did as you did in the video, checked the fuse all good. Changed the windscreen washer pump, still didn’t work. I looked on the hand book, couldn’t see the fuse for the washer motor, so went for the rear/front wipers (which was working anyways) this fuse looked dodgy, so I replaced it, hey presto it works. My fuse was the red 10amp above the one you checked. Maybe set up different in the uk car. Cost £19.00 for the pump and £.25 for the fuse. At least I know I have a new washer pump 😊
Thank you Adrian this helped me a lot. I've just replaced my daughter's pump. When I pulled the pump out the sealing grommet came out as well. I inserted the new pump with the new sealing grommet which leaked. So I reused the original and all is well. Also one of the feed tubes was a transparent and was much harder to get on - I used a cup of very hot water to soften it and pushed it over the nipple. Thanks again Adrian.
Thanks for the video. It was very helpful ! Now it works again for only 10 euros. The only think is after changing my pump I had to change my fuse because it was broke.
2:39 | Great video however I wouldn't recommend cutting the hose as it may not be long enough for the pump once it has all been re-attached to the vehicle. This could result in the hose coming off over time
Thank you for the appreciations! I had to cut the hose because I couldn't get it off from the old pump. However, the hose is actually long enough and I don't think it will be a problem if you cut 1-2 cm.
Jack the car up, remove the wheel (use axel stands!), and remove the cowling, and you'll have a much easier time getting to it than trying to reach in through that tiny gap to perform keyhole surgery on it. It's about 5 minutes of extra work.
Very useful video! I have the same engine, and the washer fluid is leaking. The tank seems to have been damaged and ruptured but I have no idea on how to remove it. Any help would be appreciated!
Hi Adrian, thanks for the video I replaced the pump but still no water spray front or back. I have checked the fuse, and it's ok. Checked when activating the washer there is 12v present without connecting the pump but no voltage when the pump is connected. Both new and old pumps tested ok with a separate 12v power source. Any idea?
Hi. Use a multimeter to check if the correct voltage is coming from the socket that connects to the pump. If you have the right voltage there, it is possible that the new pump has broken down.
Thanks for your response.I called my mechanic and I will probably change the pump.I will come back next week to inform you just in case someone else face the same problem.
I just bought a new pump, but when I replace it; it seems the procedure is the other way around. When I pull the handle: the fluid comes to the rear screen, not to front one. What did I do wrong?
@ I think the access to the pump is done like on the Peugeot 308 in my video, I leave you an image and I hope it helps you: ci.catcar.info/peugeot/img/pr/31/00088631.jpg
Hi Adrian, thanks for your video. I just changed the pump for my peugeot. But without success. The pump was new. Do you have any idea what should I do? Thank you so much
Hey, great video! Are you aware how to point the nozzles, mine are spraying too high and there is no washing fluid spread to the lower part of the driver side. I saw yours spread to the lower part. Thank you!
Thank you for the answer! I have already replaced the one on the driver side, but it still is spraying too high. I think it needs to be adjusted by the level of the front hood. Keep doing such good videos :)
Bună seara, imi puteti spune dacă nu imi merge nici stergatorul luneta si nici nu stropeste apa pe luneta la un citroen c4 coupe trebuie sa schimb pompa prezentata in video? Care este siguranta pt pompa si stropitor luneta? Multumesc frumos.
Salutare. In primul rand trebuie verificata siguranta, din pacate nu stiu sa-ti spun care ar fi deoarece difera de la masina la masina, dar verifica in manualul de utilizare descrierea sigurantelor. Daca siguranta e buna trebuie sa verifici motorul de la stergator, daca ajunge curent acolo. Verifica si siguranta de la pompa apoi verifica daca vine curent la mufa pompei.
The washers on my wife's c3 picasso work but are poor at best, could the pump be starting to fail or is there a filter that might need a clean or replacing? Thanks
Hi my front washers dont work at all, the rear one does with water no problem. Are there two pumps, one for front and one for rear? Not sure what to do? The fuse is OK. Thanks
There is only one front / rear pump, as you see in my clip. You may have clogged nozzles. Operate the pump to wash the windscreen and listen if a pump noise is heard near the right front wheel. If not heard, it may be a broken pump. If you heard the pump, check the pressure water coming on the hose to the nozzles under the engine hood.
Hi I changed the pump following your video.. super easy following your tutorial. I have a 208 and checked the fuse (f27) in the glove box. Any idea what fuse if any would it be in the engine bay?
So I done this today, however the back window wiper activates when I try to clean the front and vice versa. Tried changing the water tubes in the pump around but this stopped the front from working at all. Any suggestions greatly appreciated
Hello. First check if the polarity at the power plug changes when you start the pump to wash the rear window compared to when you wash the windshield. If this polarity changes, the pump may be defective.
@@AdrianDragan This happeneed to me today, polarity reverses on the connector, pump direction reverses with polarity reverse, but water comes out of the same hose - I figure the pump chamber seal or valve is faulty - hope so anyway.
Hello Adrian, the headlight washers on my Peugeot 307 isnt working. Windshield and rear washers are working. I'm getting error code F998 from diagnostics, but i couldnt find many solutions online. Do you have any ideas? Thanks!
For headlight washers is another pump. See in the user manual what is that fuse for this pump and check it. If it is good, the pump will probably need to be changed.
Dinis Portocarrero Thanks! You can try on ebay m.ebay.com/sch/i.html?_from=R40&_trksid=m4084.l1313&_nkw=Mini+fuse or at the auto parts sellers. Have a nice day :)
@@srevepaynr007 Now I understand. I suppose the problem is from the wiper switch. Anyway, my recommendation is to a service and find an electrician to identify the problem.
Complimenti per il video utilissimo. Con 12 euro ho risparmiato una cifra più elevata. Come minimo un meccanico avrebbe tranquillamente chiesto almeno 50/60 €. Grazie
La c4 e ceva mai adanc bagata pompa de lichid dar e exact aceeasi operatiune. In sfarsit vad si eu pe cineva care stie sa inchida o capota usor prin apasare, la mine capota doar asa usor se inchide dar iti jur ca la service toti trantesc de ea si apoi se uita de ce nu se inchide, unul din nenumaratele motive pentru care nu mai merg la service 😁 si prefer sa fac tot ce pot eu singur.
Buna ziua. Trebuie verificat cu un multimetru daca ma mufa de alimentare vine curent atunci cand actionati maneta pentru spalarea parbrizului. Daca totusi pompa se aude dar nu stropeste e posibil sa fie infundate furtunele sau duzele.
Okay this seems easy! Anyone knows what can be problem?: front jets don't work but rear jet does in 5008 (I).. Seems to me there is only 1 pump for front and rear which looks to be in order when rear window gets cleaned? I have car for 2 weeks now, I am not sure what happens when activating front skooshers. The whipers go up and down but maybe there's a blockage.. Is there also an electrical switch inbetween front and rear or am I mistaken and there are 2 different pumps?
This pump is also for washing the windshield but also for washing the rear window. It may be a clogged hose, a faulty pump (works for the back but not the front) or maybe a fuse. When you want to wash the windshield, listen to the front of the car if you hear the pump.
@@AdrianDragan Привет и вам. Если сгорел моторчик, тогда проще заменить. Если вышла из строя перепускная система, тогда трудно, но можно разобрать и немножко сточить перепускную резинку. Но жидкость потом будет возвращаться в бачок. В маём случаи очень тяжело найти аналоговые детали на замену😔, поэтому приходится ремонтировать😏.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Dude! Your videos are a treasure for old Peugeot owners.. I had the same issue and was praying it’s the fuse rather than the pump. just replaced the blown fuse.. thanks to your video I went straight in and it took me literally 2 mins. Thanks a lot
Never did anything with cars before today managed to change the pump and fixed the problem couldn’t have done it without the video
Hello. I'm glad I could help you. To have a good day!
Thank you so much for such an informative and well presented tutorial :-) Checked my fuse and it had indeed blown. So for the princely sum of £1.24 I've got my windscreen washers working again. So grateful and absolutely made up that I managed to do this myself.
Thank you man, just bought a new pump and your video will be the way I do it. I was scared because people told me that I have to remove the wheel and plastic wheel cover, but obviously I don't have to do that :D
just replaced my pump from my Peugeot 207sw , worked like a charm, thnx dude!
Thank you again! I finally bought a new pump and fitted it today. Couldn't have done it without this video! Managed to bruise both my arms in the process but it still feels like a win Haha x
Thanks for your video, I did as you did in the video, checked the fuse all good. Changed the windscreen washer pump, still didn’t work. I looked on the hand book, couldn’t see the fuse for the washer motor, so went for the rear/front wipers (which was working anyways) this fuse looked dodgy, so I replaced it, hey presto it works. My fuse was the red 10amp above the one you checked. Maybe set up different in the uk car. Cost £19.00 for the pump and £.25 for the fuse. At least I know I have a new washer pump 😊
Glad it helped
Thank you Adrian this helped me a lot. I've just replaced my daughter's pump. When I pulled the pump out the sealing grommet came out as well. I inserted the new pump with the new sealing grommet which leaked. So I reused the original and all is well. Also one of the feed tubes was a transparent and was much harder to get on - I used a cup of very hot water to soften it and pushed it over the nipple. Thanks again Adrian.
Thanks for the video. It was very helpful ! Now it works again for only 10 euros. The only think is after changing my pump I had to change my fuse because it was broke.
Maybe the fuse was damaged by the old pump.
10 bucks and 10 min work. thank you sir!
Glad to help
Thanks for this amazing video, saved me over a hundred pounds at the mechanic
Thanks so much for your video i had no clue how to do this i want to replace the pump myself now i can again thanks.
2:39 | Great video however I wouldn't recommend cutting the hose as it may not be long enough for the pump once it has all been re-attached to the vehicle. This could result in the hose coming off over time
Thank you for the appreciations!
I had to cut the hose because I couldn't get it off from the old pump. However, the hose is actually long enough and I don't think it will be a problem if you cut 1-2 cm.
Jack the car up, remove the wheel (use axel stands!), and remove the cowling, and you'll have a much easier time getting to it than trying to reach in through that tiny gap to perform keyhole surgery on it. It's about 5 minutes of extra work.
Hi. Yes, you can do that too.
Thanks very much Adrian, sorted out my problem 😅 very helpful video. Thanks again 🙏🔝
Hello. I'm glad I was of help to you :)
Definitely helped in my case, the fuse and the pump, thanks
Hi. I'm glad I was of help to you.
Thank you for your post. Straight forward and informative. Appreciated 🐙
Very useful video!
I have the same engine, and the washer fluid is leaking. The tank seems to have been damaged and ruptured but I have no idea on how to remove it. Any help would be appreciated!
I think you can remove it on the bottom, but the car must be lifted and remove the shield from below.
Hi Adrian, thanks for the video I replaced the pump but still no water spray front or back. I have checked the fuse, and it's ok. Checked when activating the washer there is 12v present without connecting the pump but no voltage when the pump is connected. Both new and old pumps tested ok with a separate 12v power source. Any idea?
Hello. I really don't know what the problem is there. I think that a visit to the electrician can find out the problem.
Bonjour, vous avez trouvé la solution? C'était quoi ? Merci
Best tutorial I've seen ...well done🎉
Thank you!
Qualitatively shot video. I also recently on my peugeot 308 recently this pump changed.
A really useful video, excellent quality images. Thank you.
I yesterday changed pump, worked like a charm, today new also one stopped working. Fuse is good. Any idea?
Hi. Use a multimeter to check if the correct voltage is coming from the socket that connects to the pump. If you have the right voltage there, it is possible that the new pump has broken down.
@@AdrianDragan thank you for the tip, I will
Can I ask something?I own a c4 2005 and when I try to use back wiper with water,it always comes from the front ,Could it be a damaged pump?
Hello. It could be the pump or the wiper lever is faulty.
Thanks for your response.I called my mechanic and I will probably change the pump.I will come back next week to inform you just in case someone else face the same problem.
@@stavroskanatsidis-df4tm I’ve just fitted a new pump and now mine is doing this. Before I had nothing but me only the front. Very odd
I just bought a new pump, but when I replace it; it seems the procedure is the other way around. When I pull the handle: the fluid comes to the rear screen, not to front one. What did I do wrong?
Hello. I don't think you did anything wrong, I think the pump is not working well.
Salut adrian.poti sa imi zici te rog de ce nu imi arată cand se termina lichidul de parbriz la un peugeot 308 din 2012?nu are senzor ?mulțumesc mult
Daca masina nu are splalatoare de faruri atunci nu are nici senzor de nivel pentru lichidul de parbriz.
@@AdrianDragan mulțumesc mult
Is it the same job for the Peugeot 508?
Hello. What year is your car? Does it have headlight washers?
2013 model, yes it has headlight washers
@ I think the access to the pump is done like on the Peugeot 308 in my video, I leave you an image and I hope it helps you: ci.catcar.info/peugeot/img/pr/31/00088631.jpg
@AdrianDragan Great! Thanks a lot👍😀
It was the similar pump, thank you very much 😊😊
Can you show us how to remove the washer fluid sensor? Mine keeps saying "washer fluid to low" and I suspect it needs a cleaning.
Hello. My car does not have a washer fluid level sensor, but the sensor should also be next to the pump, so access to it is done like the pump.
Grazie mille!!! Lavoro appena fatto e funziona benissimo! Mitico!
Hi Adrian, thanks for your video. I just changed the pump for my peugeot. But without success. The pump was new. Do you have any idea what should I do? Thank you so much
Hello. You checked the fuse?
Bonjour @freeman6785 , vous avez trouvé la solution ? C'était quoi ? Merci
Hey, great video!
Are you aware how to point the nozzles, mine are spraying too high and there is no washing fluid spread to the lower part of the driver side. I saw yours spread to the lower part.
Thank you!
Hello,
I do not think can be directed nozzles, from what I observed as fixed. A solution would be to replace them with new ones.
Thank you for the answer!
I have already replaced the one on the driver side, but it still is spraying too high. I think it needs to be adjusted by the level of the front hood.
Keep doing such good videos :)
Bună seara, imi puteti spune dacă nu imi merge nici stergatorul luneta si nici nu stropeste apa pe luneta la un citroen c4 coupe trebuie sa schimb pompa prezentata in video? Care este siguranta pt pompa si stropitor luneta? Multumesc frumos.
Salutare. In primul rand trebuie verificata siguranta, din pacate nu stiu sa-ti spun care ar fi deoarece difera de la masina la masina, dar verifica in manualul de utilizare descrierea sigurantelor. Daca siguranta e buna trebuie sa verifici motorul de la stergator, daca ajunge curent acolo. Verifica si siguranta de la pompa apoi verifica daca vine curent la mufa pompei.
The washers on my wife's c3 picasso work but are poor at best, could the pump be starting to fail or is there a filter that might need a clean or replacing? Thanks
There is no filter, however nozzles and hoses should be checked before replacing the pump.
Very useful, thank you so much.
Hi my front washers dont work at all, the rear one does with water no problem. Are there two pumps, one for front and one for rear? Not sure what to do? The fuse is OK. Thanks
There is only one front / rear pump, as you see in my clip. You may have clogged nozzles. Operate the pump to wash the windscreen and listen if a pump noise is heard near the right front wheel. If not heard, it may be a broken pump. If you heard the pump, check the pressure water coming on the hose to the nozzles under the engine hood.
407 also ? Thx
Hi. About the same, see here: ruclips.net/video/8CQ8Jkd9szA/видео.html
Thanks for help! Is it possible to remove the plastic wheel finer the same way on Partner Tepee?
Hi,
I don't know how to tell you exactly, but it's probably the same way.
Hi I changed the pump following your video.. super easy following your tutorial. I have a 208 and checked the fuse (f27) in the glove box. Any idea what fuse if any would it be in the engine bay?
Hello. Check in the car manual the description of the fuse panels.
good video. very well made. teachs very well how to do that job. thanks
Thanks for your appreciation 🙂
So I done this today, however the back window wiper activates when I try to clean the front and vice versa. Tried changing the water tubes in the pump around but this stopped the front from working at all. Any suggestions greatly appreciated
Hello. First check if the polarity at the power plug changes when you start the pump to wash the rear window compared to when you wash the windshield. If this polarity changes, the pump may be defective.
@@AdrianDragan This happeneed to me today, polarity reverses on the connector, pump direction reverses with polarity reverse, but water comes out of the same hose - I figure the pump chamber seal or valve is faulty - hope so anyway.
Hello Adrian, the headlight washers on my Peugeot 307 isnt working. Windshield and rear washers are working. I'm getting error code F998 from diagnostics, but i couldnt find many solutions online. Do you have any ideas? Thanks!
For headlight washers is another pump. See in the user manual what is that fuse for this pump and check it. If it is good, the pump will probably need to be changed.
@@AdrianDragan Yeah the fuse was blown, but i replaced it with a new one, and they still won't work. I guess it's the pump then. Thanks!
Very informative video and hard work too. Subscribed and liked😊
Is this the same procedure for the P 207 too??
Hello. I'm not really sure, but it should be about the same.
@@AdrianDragan Cheers, it does look like the Peugeot 207 is the same as its also where the tank is for the screenwash 👍
That's great 👍
@@AdrianDragan just replaced the washer pump and everything is back in working order 👌
Wow a brilliant video to follow. Thanks 😊
Merci pour cette vidéo 10/10 bravo
Avec plaisir.
How could you know the right fuse for the washer?
Hello. You can find it in the owner's manual.
@@AdrianDragan
Thanks 🙏
this video helps me alot!
Glad it was helpful!
Mine work there is not no pressure at all, barely hits the window..would this be the pump?
It is possible to be the pump, but first check the ducts and nozzles are not clogged.
Cheers!
Nice vid! Wonder where i can buy the fuse ive looked everywhere and cant find a website that they sell it
Dinis Portocarrero
Thanks! You can try on ebay m.ebay.com/sch/i.html?_from=R40&_trksid=m4084.l1313&_nkw=Mini+fuse or at the auto parts sellers.
Have a nice day :)
Adrian Dragan thanks!
My rear wiper and water sprays when it feels like it on my 307...any ideas on how I can fix this?
I'm sorry but I don't understand what your problem is 🙂
@@AdrianDragan thank you for replying. ..when im driving. ..my rear wiper starts automatically moving and water is sprayed out too a few times
@@AdrianDragan what could it be...comes on when it feels like it
I dont want it to spray or move....happens by itself
@@srevepaynr007 Now I understand. I suppose the problem is from the wiper switch. Anyway, my recommendation is to a service and find an electrician to identify the problem.
Use washing up liquid to lubricate the rubber grommet if it doesn't go back on easily
Todo eso ya lo hice, y sigue sin funcionar. Sabría decirme algo más???
De ce se separă chederul de parbriz în partea de jos la Citroen C4 1.6 HDI 2008?
Would this also be the same for an 807?
fruitloop turner Turner Hi,
Sorry, but i don't know if it's the same.
I'll have to take a look but thanks for your reply,if it is thanks to your video it should be an easy fix. Nice one.
Would it be possible to fix the pump ?
Hi. I don't think you can fix the pump.
@@AdrianDragan ok I was just wondering as I've just changed mine and it would save putting it in bin thats all. Thank you for responding.
Thank you, job done 👍
Complimenti per il video utilissimo. Con 12 euro ho risparmiato una cifra più elevata. Come minimo un meccanico avrebbe tranquillamente chiesto almeno 50/60 €. Grazie
Welcome!
Thanks, very good instruction video!
Спасибо! Вы очень помогли!
Link:
- washer pump: www.aliexpress.com/item/32615689890.html?aff_fcid=de4e2e45f1a74b518f008fbef3f2a98a-1636368630517-05504-_99u9el&tt=CPS_NORMAL&aff_fsk=_99u9el&aff_platform=shareComponent-detail&sk=_99u9el&aff_trace_key=de4e2e45f1a74b518f008fbef3f2a98a-1636368630517-05504-_99u9el&terminal_id=a4886d1a72584241b5df38394da27292
Brilliant video! Thanks for your efforts
Thank you I have done mine ☺️
I have the rear windscreen dont work where i find the pump ??
Hi. This pump is also for the rear windshield.
@@AdrianDragan my windscreen too slow take a moment then the water out . Thank you very much . And your videos so awesome 👌👌👌
La c4 e ceva mai adanc bagata pompa de lichid dar e exact aceeasi operatiune. In sfarsit vad si eu pe cineva care stie sa inchida o capota usor prin apasare, la mine capota doar asa usor se inchide dar iti jur ca la service toti trantesc de ea si apoi se uita de ce nu se inchide, unul din nenumaratele motive pentru care nu mai merg la service 😁 si prefer sa fac tot ce pot eu singur.
Salutăm d-nul eu am un peugeot 306 ,mie nu aruncă apă pe parbriz dar pe lunetă da care să fie problema mulțumesc.
Buna ziua. Trebuie verificat cu un multimetru daca ma mufa de alimentare vine curent atunci cand actionati maneta pentru spalarea parbrizului. Daca totusi pompa se aude dar nu stropeste e posibil sa fie infundate furtunele sau duzele.
Si la mine sa ars siguranta am Un 307 😍
Sper ca ti-a fost de ajutor clipul meu :)
Okay this seems easy! Anyone knows what can be problem?: front jets don't work but rear jet does in 5008 (I).. Seems to me there is only 1 pump for front and rear which looks to be in order when rear window gets cleaned? I have car for 2 weeks now, I am not sure what happens when activating front skooshers. The whipers go up and down but maybe there's a blockage.. Is there also an electrical switch inbetween front and rear or am I mistaken and there are 2 different pumps?
This pump is also for washing the windshield but also for washing the rear window. It may be a clogged hose, a faulty pump (works for the back but not the front) or maybe a fuse. When you want to wash the windshield, listen to the front of the car if you hear the pump.
Great video very useful
Thank you.
Welcome.
What if fuse goes bad? Whats the problem then?
Probably the pump is blocked.
@@AdrianDragan thanks for replying. I changed fuse again and fuse broke again. And i hear no squirting sound? What could my issue be?
@@bengisolja777 I believe the pump is defective, it is in short circuit and because of this is burning the fuse.
How to remove Windshield Wiper Water Tank peugeot 307 year 2005?
You must remove the front bumper and then you can also remove the wiper water tank.
Thank you! :)
Thank you..My compliments ..
Thank you 🙏
Super 👌
Thanks!
Merciiiii❤
Это замена на новое. А как на счёт ремонта старого?😉
Привет. Я думаю, что починить старый слишком сложно :)
@@AdrianDragan Привет и вам. Если сгорел моторчик, тогда проще заменить. Если вышла из строя перепускная система, тогда трудно, но можно разобрать и немножко сточить перепускную резинку. Но жидкость потом будет возвращаться в бачок.
В маём случаи очень тяжело найти аналоговые детали на замену😔, поэтому приходится ремонтировать😏.
peugeot 206
same?
Hi,
I am sorry but I do not know.
Good working
Thank you!
Good,thank
thanks
super
Easy on the volume..
Such a big splash
Niagra falls
I can tell from here that your jets are dead mate :D