now you need to make another, but on a really nice MTN bike setup. but the death trap aspect makes it the way it is now that would probably go away a little with suspension.
Man that is bad azz .I'm trying to find a engine now thanks for the motivation for my new visit to the hospital 😅 your awesome 👍..and crazy as hell to be careful if you can help it 😅
You might want to add wider wheels. I could help but notice how bad your rear wheel would wobble and flex as you have it gas. If one of those wheels break or get warped while riding you could get hurt pretty bad or worse. The wider wheels would give it more stability and strength.
Yo! 😂 Finally! Wish I saw this 6 months ago. I tossed a 139cc 2 stroke on one. First bike on RUclips I saw built like mine. Made props bro. It seems you beat me to it ha! Nice work!
That's friggin awesome, great build man! I'm totally inspired now to build a bike that I've actually feared building... My Haro F4 with a Jincheng X-pro 150 I salvaged from a scrap yard. It's going to be a hell of a challenging build! I'm stoked!
I did a kx80 on a gas bicycle frame .... Super nasty very scary 😂... Hard to keep the front tire down when the power band kick in very small sprocket on the back ... I'm going to put it on my cargo bicycle see how that goes.... Love the videos.....
I have purchased and waiting for an 80cc motor kit for my canebrook beach cruiser. I put mountain bike handle bars on it. I cannot wait till she's altogether. Less than a week till it's delivered. I'm so stoaked. You should run Marvel Mystery Oil in your crank case and gas tank. Trust me. You'll feel and hear the difference in your motor
Dude your awesome thank you so much! I know it’s something that had been said many times from other people . But thank you I really value the friends I make and support I receive 🙏 got some new stuff on the way 👍
Damm this is crazy I look up all over youtube how to put a dirt hike motor on a pushy and can't find one anywhere and here you are with your accomplished build 😂 this thing is sick I'll have to get on off them 49cc chopper bikes and chuck my self one off these little engines and hit the streets when I hear the big boys out on the bikes and they be trying to catch up to me pahhahaha 😂😂😂😎
I got a really nice rare Pacific Coast chopper pedal bike and I definitely want to put a motor on it. I think it'd be awesome to make it a hybrid between gas powered and electric
Shit man the torque! Not even a jackshaft and look at her go. (Then again if its a little dirt bike motor then its possible you are shifting her, kinda sounds like it). What a SWEET BUILD❤ I am jelly. What motor is that? Subbed btw.
Get a springer front fork and Gemini wheels (I think that's what there called) they're specifically made for motorized bikes. But damn boi that bike is coming in HOT, def saving up the 500 for one lol
I wonder.. Are you using the old pirate cycles hub adapter? There used to be a small company in Massachusetts. Like 10 years ago when i built mine. They had some parts specially machined. Real killer stuff. Best thing was that hub adapter. It made it so a piece would bolt clamp around a rear brake hub then hook a sprocket to. That stupid rag joint crap they provide in the kits is useless... Would loosen the spokes on a new rim in a couple miles.
The main thing i think about is how long can the wheel bearings from a walmart bicycle hold up with speeds and force like that... Guess im gettin old. Never thought id think something looked dangerous! Haha. I can go pretty good on mine. Been a couple years tho.. But 35-40 seemed scetchy. I cant imagine double.
A fine build sir. Fast! I build gas powered fan driven mtn bikes Full suspension required (keeps wheels on road) Full gear goggles helmet,boots, gloves minimum. Shoulder,hip,knee, elbow, back recommended.(one spill can damage several of these). Prepare for the worst, pray for the best.
Bro no damn way, you were rippin on my home town roads literally behind my house in Murrieta 😂 hell ya, I looked up to see if a swap like this was done bc I ride these types of bikes around and wanted more power and then I was like wait I recognize those streets lmao hell ya lol. How’d you go abt mounting the motor bro? Always interesting seeing other people’s builds
Got a 110cc bmx bike I'm having some problems getting it dialed in, any tips would greatly help, building it to get to and from work because walking is killing my legs
The only issue is that I heard these dirtbike engines dont make good commuters since they have short maintenance intervals and that the components where engineered with a child riding the bike in mind. Maybe people also say the clutches are shit but I think that's because they just aren't familiar with setting them up. Your thoughts from your expereince?
Show us how you made it! The engine mounting points and other details! Btw, I just sub'd! 🤘😁
Nbs mainly engine model n how he mounts it
@@Will-xj6obhe clearly states that its a ktm 65. He direct welded engine mounts to the frame
Yes, just closeups and more dets would be great. love this stupid fast thing!!! 😂
I agree man would be awesome to make one
That bike you built is phenomenal. Nice work.
Best sounding bicycle I’ve ever heard
Best thing I've ever seen! Absolutely bloody brilliant! Hilarity ensued 🤣🤣
now you need to make another, but on a really nice MTN bike setup. but the death trap aspect makes it the way it is now that would probably go away a little with suspension.
This thing has got spirit! Absolutely fantastic build this one!
Man that is bad azz .I'm trying to find a engine now thanks for the motivation for my new visit to the hospital 😅 your awesome 👍..and crazy as hell to be careful if you can help it 😅
I'd love to have something like that, so all of the bikers around here don't point and laugh at my 40 mph ported PK 80 bikes. Great bike btw 👍.
Thanks man !
@@UFOBUILTCO can you possibly please building me one I'd pay money for it
@@harrybobb7282 I'ma eventually build one and make a video about it
@@TJ-ux6ng can you please build me one for me with a occ Schwinn chopper bike
@@harrybobb7282 sure I got to see how this first build works out 👍
Baddest bicycle in the world 🌎 🙌!!
glad you wear a helmet
You might want to add wider wheels. I could help but notice how bad your rear wheel would wobble and flex as you have it gas. If one of those wheels break or get warped while riding you could get hurt pretty bad or worse. The wider wheels would give it more stability and strength.
Yo! 😂 Finally! Wish I saw this 6 months ago. I tossed a 139cc 2 stroke on one. First bike on RUclips I saw built like mine. Made props bro. It seems you beat me to it ha! Nice work!
The "Huffy-Puffy" blue smoke machine
That's friggin awesome, great build man! I'm totally inspired now to build a bike that I've actually feared building... My Haro F4 with a Jincheng X-pro 150 I salvaged from a scrap yard. It's going to be a hell of a challenging build! I'm stoked!
I did a kx80 on a gas bicycle frame .... Super nasty very scary 😂... Hard to keep the front tire down when the power band kick in very small sprocket on the back ... I'm going to put it on my cargo bicycle see how that goes.... Love the videos.....
Post video
Wow. Very impressive performance. Makes me want to upgrade my Huffy, it ain't anywhere near that fast. Nice build.
Uff encantado de tu proyecto!! Saludos desde Colombia 🇨🇴
2:50
Biker: "Dang, I need a bike like that"
Great job man! That's so rad!!! I'd love to build one on a full suspension MTB.
almost impossible because of the frame geometry but i would love to see one work.
U got to bring this thing back
Lol bro no way would I be pushing a huffy 76 mph 😆 ur nut 👍👍
That looks like fun. Great job on the build. I would be padded up to the nine though riding that rocket of a bike.
You need to take this thing to the isle of mann! Even if as a joke, i think it would be a crowd pleaser.
That whole event is Nuts! Would be a cool experience though
Now that's a bad ass bike how can I build one my self
RUclips it 😏
Dam that’s a beast bro nice build
Thank you !
Is it just me or did I heard the sound clip repeat once again at 2:00?!
Fxxkin sick. You're brave bro 😂 I'd 💩 myself 😂 that bump scared me too. Add some struts.
Haha that was 110%unexpected happy I rode away from that !
Sick af bruh
Wow... Just Awesome Sauce! ... did you build that yourself? How can I get top notch speed like that. ? Thanks for sharing.
I did and it’s one of those easy but difficult things
You need to build one with a ktm 85cc or put a hole shot clutch on this one and bore the engine
I have purchased and waiting for an 80cc motor kit for my canebrook beach cruiser. I put mountain bike handle bars on it. I cannot wait till she's altogether. Less than a week till it's delivered. I'm so stoaked. You should run Marvel Mystery Oil in your crank case and gas tank. Trust me.
You'll feel and hear the difference in your motor
Is that the oil that u mix in the gas right also do you still have your bike
Ultra Stoked dude.
Very cool, does it still work, I built such a bike, but with a Lifan 125cc 4-speed engine, I have no problems so far
Legend!!! Searching on the internet to find this vid 👌
That's all out NUTS!! 6speed!! How in the world! I'm 66 and gotta have one!
Holy hell that thing is fast!
Un sueño esa bicimoto,saludos desde Argentina 💪
Looks like the wheels need to be balanced, maybe a steering damper, sure is fast for a 65.
I believe wiseco builds a high dome piston for that engine, VForce reeds procircuit pipe and lectron carb.
Man that’s badass😱😱😱
Thanks dude!
I've subbed and gave a thumbs up.
Thanks my dude!!!! I got more stuff dropping soon
That thing must be a blast to ride!! Makes my klx140 look slow😂
Thanks man!!! Make sure you subscribe to see more ! Also motivates me to keep on keepin on 🤙
@@UFOBUILTCO oh dont worry, I already subscribed since the 1st video i seen on this channel🤟🏼
Dude your awesome thank you so much! I know it’s something that had been said many times from other people . But thank you I really value the friends I make and support I receive 🙏 got some new stuff on the way 👍
Would love to see another video on this build..
After the intro where you’re standing seems to be a popular place to shoot videos? I remember a guy dancing in that same spot to pumped up kicks.
Fratello hai vinto 😂😂😂💥💥✊✊✊✊✊✊✊✊✊
I want to buy one for sure! How much you charge??
Damm this is crazy I look up all over youtube how to put a dirt hike motor on a pushy and can't find one anywhere and here you are with your accomplished build 😂 this thing is sick I'll have to get on off them 49cc chopper bikes and chuck my self one off these little engines and hit the streets when I hear the big boys out on the bikes and they be trying to catch up to me pahhahaha 😂😂😂😎
Can u got over the process of making the mounts for every thing and the process of building it
Se ve bien y corre que tipo de motor es ese un 80cc o cual es saludos desde Puerto Rico 🇵🇷
How does switching gears work .how is transmission set up .do u use ur foot or a lever to switch and down shift how .
The engine is from a dirt bike . 6speed hydraulic clutch , liquid cooled
That thing is sick 👏
Hello ufobuiltco, have you more video from the 2 stroke huffy
Donde compraste ese motor saludos
Thing looks legit fast
Best build brother
That thing is 🔥
Man get a cafe style frame with that engine...that would be so cool
Your bike is unique
What other dirt bike motor will fit in a beach cruiser?
I got a really nice rare Pacific Coast chopper pedal bike and I definitely want to put a motor on it. I think it'd be awesome to make it a hybrid between gas powered and electric
Fantastic
Question for you? 80cc what kinda of carburetor kit and piston head or is the exhaust
Now that’s Fast
Shit man the torque! Not even a jackshaft and look at her go. (Then again if its a little dirt bike motor then its possible you are shifting her, kinda sounds like it). What a SWEET BUILD❤ I am jelly. What motor is that? Subbed btw.
Read the title...it tells all 😂
@@Assasinnationtv 💯 agreed
freakin awesome
Hell yeah 💯
🤝
@@UFOBUILTCO love the build can’t wait to see some drag races on it
Amazing it is
Awesome 🔥 🔥
Bro where did this thing go
Making a come back , rear wheel finally gave out after years of service
I love this so much! YOLO on the Huffy all day long with nary a f@*K in sight
Get a springer front fork and Gemini wheels (I think that's what there called) they're specifically made for motorized bikes. But damn boi that bike is coming in HOT, def saving up the 500 for one lol
alto video amigo saludos de argentina
Awesome
I wonder.. Are you using the old pirate cycles hub adapter? There used to be a small company in Massachusetts. Like 10 years ago when i built mine. They had some parts specially machined. Real killer stuff. Best thing was that hub adapter. It made it so a piece would bolt clamp around a rear brake hub then hook a sprocket to. That stupid rag joint crap they provide in the kits is useless... Would loosen the spokes on a new rim in a couple miles.
Nice Bike where is this Arizona or California get a bicycle headlight and taillight
Have you had spoke issuse
Nope ! Just had to tighten them for the first time a few days ago since building it .
Nice
How did u do the rear axle?
Let's get some plans brother! I'm going to build one too!!
The main thing i think about is how long can the wheel bearings from a walmart bicycle hold up with speeds and force like that... Guess im gettin old. Never thought id think something looked dangerous! Haha. I can go pretty good on mine. Been a couple years tho.. But 35-40 seemed scetchy. I cant imagine double.
les goo
I have a 80 cc two-stroke what head or exhaust or carburetor kit all that that I need to get my motor upgraded that way
Surprised you didn’t get pulled over. Build me one lol
That rear hub come apart yet?
A fine build sir. Fast!
I build gas powered fan driven mtn bikes
Full suspension required (keeps wheels on road)
Full gear goggles helmet,boots, gloves minimum. Shoulder,hip,knee, elbow, back recommended.(one spill can damage several of these). Prepare for the worst, pray for the best.
Wow
How many cc and what site that from and how much
how u build it i wanna do a kx100 motor in mine i weigh like 300 pounds and wanna fly like im lighter
awsome
Wow nice! So you how did you add gears?
An actual dirtbike little race motor
And do you have a 100cc 2 stroke
What u have your engine tune too🔥🔥
Bro no damn way, you were rippin on my home town roads literally behind my house in Murrieta 😂 hell ya, I looked up to see if a swap like this was done bc I ride these types of bikes around and wanted more power and then I was like wait I recognize those streets lmao hell ya lol. How’d you go abt mounting the motor bro? Always interesting seeing other people’s builds
Can he still pedal with it?
Yes🙌
What engine is that?
999th LIKE + New sub 🏍️💯
We’re can I fine the full build
Bro what would ya charge to build me one sure it’s asked a lot
I'll take one how much?
Got a 110cc bmx bike I'm having some problems getting it dialed in, any tips would greatly help, building it to get to and from work because walking is killing my legs
I have the same one, only on a Lifan 125cc 4-speed mountain bike, I haven't had any special problems with the frame and wheels.
The only issue is that I heard these dirtbike engines dont make good commuters since they have short maintenance intervals and that the components where engineered with a child riding the bike in mind. Maybe people also say the clutches are shit but I think that's because they just aren't familiar with setting them up. Your thoughts from your expereince?