Это видео недоступно.
Сожалеем об этом.
Bluetooth Low Energy Tutorial with HM-10 BLE 4.0 & Arduino
HTML-код
- Опубликовано: 17 авг 2024
- Bluetooth, a simple wireless communication module most popular since the last few decades and easy to use are being used in most of the battery-powered devices. Over the years, there have been many upgrades of Bluetooth standard to keep fulfil the demand of customers and technology according to the need of time and situation. It all started from Bluetooth version 1.0 and currently, Bluetooth version 5.0 is available in the market. Over the few years, there are many things changed including data transmission rate, power consumption with wearable and IoT Devices and Security System.
To learn about the Bluetooth working, HC-05 & HC-06 is widely available in the market. But here we are going to learn about HM-10 BLE 4.0 with Arduino Board. The HM-10 is a readily available Bluetooth 4.0 module. This module is used for establishing wireless data communication using any Android App in the smartphone. The module is designed by using the Texas Instruments CC2540 or CC2541 Bluetooth low energy (BLE) System on Chip (SoC). The module design and firmware originated from the Jinan Huamao Technology Company.
As the name suggests, BLE focuses on low energy consumption. Low energy focus comes with some sacrifices particularly around data transfer rates and the range of operation. With all the hype around IoT (Internet of Things) and the slew of technologies and devices out in the market, BLE is attempting to position itself as a leader for the future of IoT.
To learn more & Source Code Visit: how2electronic...
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe our channel for more Electronics project and tutorials.
Website: how2electronic...
Facebook: / electronicsbyalex
After I have been searching for the tutorial of Bluetooth for Arduino, this channel is best. Thank you so much
so voltage divider or logic level converter between them unlike HC-05 ?
your blog clearly says that one needs to convert Arduino's 5V pin to RX.
but at the end of your blog, your wiring diagram says otherwise
Any issues with no voltage divder in the RX line?
I was looking for a 'newb's first bluetooth tutorial', and this one is great for that. Even more impressive considering it seems to be the only one even remotely useful.
Hi this is a great video, I'm new to all of this stuff and I don't have any idea at all , I have trouble trying to discover the HM-10 that I have when using the ble scanner , I am currently using the Ks0174 keyestudio HM-10 Bluetooth-4.0 V2 , it's connected to the arduino uno board , I have also followed your instructions yet the application still cannot discover the module, any Idea what's going on here? thanks
Hi, great tutorial! my HM-10 BLE's red light doesn't blink and it stays red without blinking, do you know why?
Hi, how to set HM-10 so it can replace HC-05? We have Bluetooth classic MIT APP INV APP that works well with HC-05 but not with HM-10. So can HM-10 work as a HC-05 after setting it's parameters?
hello sir,i am developing my own app voltmeter for arduino using mit app inventor.but here it is not showing the hm10 bluetooth module.please help me with this problem
I have a small problem. I need to use components that are compatible with Arduino. A position sensor (so I use a GPS module. This GPS module must be Adafruit Ultimate GPS Data Acquisition Module (GPS Included)). A position storage (with an SD card that must work with an SPI link). A bluetooth interface. A IHM to visualize the route (using an Android tablet that is compatible with a bluetooth module).
you can advise me to use what as a component . because it's 3 components must be compatible with Arduino and an Android tablet IHM thanks to a Bluetooth module.
Is it possible to measure the distance between two hm-10s while communicating with each other?
thank you so much for your help, this was a great tutorial and the link in the description to the tutorial is also great!
This helped me a lot
Also I had a problem with the compiling....
It said it had some troubleshootes
why mine is not bonded and the the Bluetooth is not connected?
I have the same problem, help!
@@abigailrodriguez4658 I have te same problem, did you guys how know how i solve this?
I have ble 4.0 bluetooth module how can we use it for home automation with arduino uno r3 becoz it is not connected with home automation bluetooth app
how to send data from Arduino to Cell Phone app
How to change Name and baudrate the BLE module?
I have a doubt is codes for Hm-10 and Hc-05 are different? Because already have project on HC-05 and if I now just replace this Bluetooth module to Hm-10 is this previous code work properly or I need to alter?
Both are different. The same code wont work.
@@HowtoElectronics ok thank you for clarifying this 🙏🙏 U doing good keep going
thanks for the video is very useful, question, how can I pair the bluetooth using the pass and the app?
did some changes and then worked,Thx
really helped me with my project, thanks a lot
What if I want to use the HM 19 without Arduino
Be aware with factory default baud rate. Mine was 115200 both I have received.
Thank you very much you solve my problem
THANK YOU!!! You help me a lot!!!
HOW TO RECEIVE DATA?? DO YOU KNOW?
thanks for this video. which one arduino is tha best ???
Arduino UNO
Nice project 👍
at what distance in meters it offers its connection
Up to 7 ft
@@HowtoElectronics I have a small problem. I need to use components that are compatible with Arduino. A position sensor (so I use a GPS module. This GPS module must be Adafruit Ultimate GPS Data Acquisition Module (GPS Included)). A position storage (with an SD card that must work with an SPI link). A bluetooth interface. A GUI to visualize the route (using an Android tablet that is compatible with a bluetooth module).
you can advise me to use what as a component . because it's 3 components must be compatible with Arduino and an Android tablet IHM thanks to a Bluetooth module.
Where is the cod 😐😐😐
Hi Sir how do i pair with password? and it says on the app the name is BT- 05
same problem
Thank u sooooooooooo much
why did these clowns solder those pins in that orientation?
thangs bro y need only de code XD but other videos the code dont work
👍👍👍
oh god ur pronunciation...
English is obviously his 2nd language you douche