HI. GREAT VIDEO... IM IN AUSTRALIA, AND CAN'T GET PLASTICS FOR THE SMR450 2008, NOT LISTED AT ANY SHOP I GO TO OR CALL!!! DO YOU KNOW IF THE TE PLASTICS FIT??? THANKS STEVE.
I run KN filters in my 510's and they do a great job. For sure they get dirtier faster compared to use in a sealed air box but I don't care, its worth it for me. I've not had one issue and Miika knows me, he knows I don't ride in the rain and very little offroad so again, not risky for my type of riding. I also know for certain the extra air is a huge help with these bikes. They have poorly designed air boxes so if you want more performance, open the air box up. Just do it in a way that won't be risky for your type of riding.
depends on what u need. I get most motor parts from Halls Cycles but odd stuff like bling, anywhere I can find it. hmu if you need anything specific u can't find, i'll prob know where to look. on Insta, same handle
@@alphakilo-79 believe it or not, the hiflow filter company is like 20 minutes from me lol. where u at bro? I can tell you the model to get and u should be able to get them on ebay for the best price. Also, k/n filter all the way. Its costly but better air flow for these and you really need it, esp for the 2010. I'd like to know more about your bike actually, i have a 2010 frame and will be migrating my new motor and dual leos over to her this winter. The 2010 is like the best of this run
very cool bro. not sure what you know about these bikes but they're the best of the best for me. They can race, flat track, dirt track fine, wheelies are like amazing, stoppies, twisties and if you dial them down on the sprocket, you can stunt them too. Personally I'm using them for the higher speed stuff in the twisties and wheelies. The Berg I use for low end, she's not as fast as these 510s in a straight line
I found them on Amazon, no name brand but they fit fine and should help. Hopefully I'll never have to test them :) www.amazon.com/gp/product/B077ZW3141
Nice vídeo. I have a 2007/2008 carburetor in Brazil. Put something written below the video for me to translate, because I don't understand your language. Regards, from Rio de Janeiro, Brazil.
você deve ser capaz de ativar as legendas ocultas ao reproduzir meu vídeo e, em seguida, pode escolher o brasileiro ou qualquer outro idioma e ele será traduzido para o que você escolher.
I just added a link to my first video on this. In that vid, you'll see the brass fitting you need to get from Toxicmotoracing.com. I'll put a link here but basically you'll want to take the valve cover off and fit the new on in. Its super tight and overall, 100% improvement over oem. Here is my first video on this issue/fix: ruclips.net/video/w1c3YrTznA8/видео.html And here is a link to the part on Toxic: toxicmotoracing.com/parts/hebv-1
@@handlmycck the zippy valves are available around the globe as they're small and easy to ship. And many countries have distributors too. As I see it, you are loosing pressure/oil and basically performance through that port if you don't get it fixed.
@@motardyoda I could only find them at toxic and ziptyracing, both based in US. With shipping an taxes it would set me back almost a 100 euros. If you know anyplace closer, feel free to tell me. Otherwise Im gonna have to figure out a diy fix. Cheers.
@@handlmycck so if you pull up the part number and google it, you can find that exact plastic part available for sure. But I would recommend a kit that fits perfectly and routes the hose to a filter like I detail in my vid. Its from a site in Italy. If you go to this page and scroll down, you'll see it. Its just under the K/N Air filter here: www.htmracing.it/prodotti-moto-go-kart/accessori-ricambi-moto-go-kart/accessori-ricambi-marca-moto/accessori-ricambi-husqvarna/accessori-ricambi-husqvarna-250-450-510-530-4t/?fbclid=IwAR2Q05FOfFSG65M7qM1Y394TM7EOGQpITeC8smXTUSKawyqdpCsZvhAo_8Y
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
HI. GREAT VIDEO... IM IN AUSTRALIA, AND CAN'T GET PLASTICS FOR THE SMR450 2008, NOT LISTED AT ANY SHOP I GO TO OR CALL!!! DO YOU KNOW IF THE TE PLASTICS FIT??? THANKS STEVE.
Heyoo. Are the 2 big holes in the air box safe? I'm talking About the black and red 510.
yes, if not drive in rain day or in thick road dust
I run KN filters in my 510's and they do a great job. For sure they get dirtier faster compared to use in a sealed air box but I don't care, its worth it for me. I've not had one issue and Miika knows me, he knows I don't ride in the rain and very little offroad so again, not risky for my type of riding. I also know for certain the extra air is a huge help with these bikes. They have poorly designed air boxes so if you want more performance, open the air box up. Just do it in a way that won't be risky for your type of riding.
Where are some good places to get parts for a 510? I'm getting ready to pick up a 2010.
depends on what u need. I get most motor parts from Halls Cycles but odd stuff like bling, anywhere I can find it. hmu if you need anything specific u can't find, i'll prob know where to look. on Insta, same handle
@@motardyoda I will look you up on Instagram. I was mainly wondering where you get oil filters and other misc. Maintenance parts?
@@alphakilo-79 believe it or not, the hiflow filter company is like 20 minutes from me lol. where u at bro? I can tell you the model to get and u should be able to get them on ebay for the best price. Also, k/n filter all the way. Its costly but better air flow for these and you really need it, esp for the 2010. I'd like to know more about your bike actually, i have a 2010 frame and will be migrating my new motor and dual leos over to her this winter. The 2010 is like the best of this run
@@motardyoda I'm going to pick it up on Sunday. I'm in Iowa. I'll message you on insta once I get it. I just started following you.
very cool bro. not sure what you know about these bikes but they're the best of the best for me. They can race, flat track, dirt track fine, wheelies are like amazing, stoppies, twisties and if you dial them down on the sprocket, you can stunt them too. Personally I'm using them for the higher speed stuff in the twisties and wheelies. The Berg I use for low end, she's not as fast as these 510s in a straight line
Where do I find those exhaust guards for the Leovince?
I found them on Amazon, no name brand but they fit fine and should help. Hopefully I'll never have to test them :) www.amazon.com/gp/product/B077ZW3141
Nice vídeo. I have a 2007/2008 carburetor in Brazil. Put something written below the video for me to translate, because I don't understand your language. Regards, from Rio de Janeiro, Brazil.
você deve ser capaz de ativar as legendas ocultas ao reproduzir meu vídeo e, em seguida, pode escolher o brasileiro ou qualquer outro idioma e ele será traduzido para o que você escolher.
How should i go about getting the breather hose to stick to the cylinder head? The connection is so loose it just falls off from vibration
I just added a link to my first video on this. In that vid, you'll see the brass fitting you need to get from Toxicmotoracing.com. I'll put a link here but basically you'll want to take the valve cover off and fit the new on in. Its super tight and overall, 100% improvement over oem. Here is my first video on this issue/fix: ruclips.net/video/w1c3YrTznA8/видео.html And here is a link to the part on Toxic: toxicmotoracing.com/parts/hebv-1
@@motardyoda Oh you had a video on it, my bad. Thanks for the reply! Too bad Im in EU though.
@@handlmycck the zippy valves are available around the globe as they're small and easy to ship. And many countries have distributors too. As I see it, you are loosing pressure/oil and basically performance through that port if you don't get it fixed.
@@motardyoda I could only find them at toxic and ziptyracing, both based in US. With shipping an taxes it would set me back almost a 100 euros. If you know anyplace closer, feel free to tell me. Otherwise Im gonna have to figure out a diy fix. Cheers.
@@handlmycck so if you pull up the part number and google it, you can find that exact plastic part available for sure. But I would recommend a kit that fits perfectly and routes the hose to a filter like I detail in my vid. Its from a site in Italy. If you go to this page and scroll down, you'll see it. Its just under the K/N Air filter here: www.htmracing.it/prodotti-moto-go-kart/accessori-ricambi-moto-go-kart/accessori-ricambi-marca-moto/accessori-ricambi-husqvarna/accessori-ricambi-husqvarna-250-450-510-530-4t/?fbclid=IwAR2Q05FOfFSG65M7qM1Y394TM7EOGQpITeC8smXTUSKawyqdpCsZvhAo_8Y
LIKE
HEY