BROTHER YOU JUST SAVED A SINGLE FATHER 150.00, I WAS ON MY WAY TO BUY MY SON ANOTHER HEATER AND I FIGURED I WOULD WATCH A VIDEO FIRST, THANK YOU SO MUCH, CHEERS FROM ONTARIO CANADA
Thank you for the handy fix and tips! Now time for me to DIY and replace rear wheel hub assembly and bearings on driver and passenger side. A 2015 Honda CR-V SE FWD. Complete with a tire rotation and all new brakes and rotors. Gotta love the DIY.
Thanks for posting this. I'm in a remote location in Alaska where getting another heater might take weeks. I was able to fix mine in 5 minutes after watching your video. 👍
Thank you so much for your video. It solved my heater problem. I opened her up and did exactly as you said. The little red button was the magic! If you want her to get hot, ya gotta flick the little red button!
Thank you for taking the time to help others with your initiative and knowledge sharing. The internal Thermal reset button fixed the problem Now I'm going to take it apart further clean it and put it back together obviously The thermal reset switch popped due to dust debris and cat hair in my case that made it overheat. Otherwise without your video this heater would have ended up in the landfill sooner than later thank you!
Note: to remove the heater from the wooden case you have to remove one long screw in each of the four casters (wheel assembly) on the bottom, took me forever to figure that out 🤦
Thanks so much! I didn't have this particular unit, but you helped me to recognize the thermostat reset switch on mine, and I have it working again now!
Thanks, your tip worked! I think I have the same brand but unfortunately had to take off all the panels to find that trip switch. You'd think they'd make it accessible.
*Model ZCHT1001US only: Infrared space heater reset (If unit was overheated)* *1. Front of heater facing away from you, you'll remove 5 silver screws from the back (3 on left side & 2 on inner top)* *2. Then you'll have to slide off the top cover by pulling it inward towards you. (Back of heater facing you)* *3. Once that's off, you'll unscrew 2 black screws on the left (now visible once top cover was removed)* *4. Flip unit on side with the left side facing ceiling, this time you will slide the side cover off by pushing it away from you. (rear of heater still facing you)* *5. There should be two wires with rubber casings at the head (more than likely braided red & dusty pink) & a dial like thing sticking out in between it.* *6. Poke it, it doesn't click or make any noise. (Feel free to press it several times if you are unsure)* *7. Reassemble the heater. (Fit on the left side casing) then prop it upright, 2 black screws from under the top, fit on top cover, 2 silver screws at the backs inner side, and then 3 of the left screws. Once you've finished these steps, stand up, do some stretches & last but not least plug in the unit & see if it's FIXED.*
Hi, I have a Sun Twin. The heater elements still come on because I see the orange lighted area behind the grill but the unit does not blow air. Do you think the fan may have a fuse or reset switch.? I've yet to take anything apart. Thanks!
You don't have to jump out the thermostats,you can set your meter on continuity and test them with the heater is unplugged.The thermostats or thermal fuses are either open or closed,closed means it will carry voltage same as jumping it out.The only exception with these thermal disc's is one of them will be a temperature cycling thermostats but most of the time they should test closed when the unit is cool.
@@williamgoettman1649 Just bought a similar one with 750/1500 watt options at Macs hardware 1/2 price for $60.00, bought a tall tower quartz rods infrared for $50.00 and like it best.
I have one and when it reaches the temp in the room and shuts the heat off ( cycles down ) before totally shutting off- it wont shut off it just runs the fan and after a while blows cold air - recirculating the warm air . so somewhere a switch isnt cutting off.
No, the fan is still going to cool the unit; for instance, your manual probably says not to shut the whole unit down, but rather turn down the thermostat first, to shut down the heating element, and let the fan continue, then use the on-off switch to turn it off. It's bad for the unit to shut it all off when it has been running a while.
Hearing my friend hit his heater every day from him running it at 86 degrees non stop is like listening to Bam Bam from the Flintstones. His problem stems from tearing things up sadly.
BROTHER YOU JUST SAVED A SINGLE FATHER 150.00, I WAS ON MY WAY TO BUY MY SON ANOTHER HEATER AND I FIGURED I WOULD WATCH A VIDEO FIRST, THANK YOU SO MUCH, CHEERS FROM ONTARIO CANADA
Thank you for the handy fix and tips! Now time for me to DIY and replace rear wheel hub assembly and bearings on driver and passenger side. A 2015 Honda CR-V SE FWD. Complete with a tire rotation and all new brakes and rotors. Gotta love the DIY.
Thanks for posting this. I'm in a remote location in Alaska where getting another heater might take weeks. I was able to fix mine in 5 minutes after watching your video. 👍
Thank you !! Furnace is out and needed this to work…. After following your instructions and hitting the reset button…… we are back in business!!!
Thank you so much for your video. It solved my heater problem. I opened her up and did exactly as you said. The little red button was the magic! If you want her to get hot, ya gotta flick the little red button!
Thank you for taking the time to help others with your initiative and knowledge sharing. The internal Thermal reset button fixed the problem Now I'm going to take it apart further clean it and put it back together obviously The thermal reset switch popped due to dust debris and cat hair in my case that made it overheat. Otherwise without your video this heater would have ended up in the landfill sooner than later
thank you!
Note: to remove the heater from the wooden case you have to remove one long screw in each of the four casters (wheel assembly) on the bottom, took me forever to figure that out 🤦
Thanks so much! I didn't have this particular unit, but you helped me to recognize the thermostat reset switch on mine, and I have it working again now!
Thank You! I have a different brand yet your information helped me get mine working again. What a relief!! ☮️🙏🏼💕
Got my heater back on track. Thank you so much!
Thanks, your tip worked! I think I have the same brand but unfortunately had to take off all the panels to find that trip switch. You'd think they'd make it accessible.
What brand heater do you have?
Thank you! This worked for me!!
*Model ZCHT1001US only: Infrared space heater reset (If unit was overheated)*
*1. Front of heater facing away from you, you'll remove 5 silver screws from the back (3 on left side & 2 on inner top)*
*2. Then you'll have to slide off the top cover by pulling it inward towards you. (Back of heater facing you)*
*3. Once that's off, you'll unscrew 2 black screws on the left (now visible once top cover was removed)*
*4. Flip unit on side with the left side facing ceiling, this time you will slide the side cover off by pushing it away from you. (rear of heater still facing you)*
*5. There should be two wires with rubber casings at the head (more than likely braided red & dusty pink) & a dial like thing sticking out in between it.*
*6. Poke it, it doesn't click or make any noise. (Feel free to press it several times if you are unsure)*
*7. Reassemble the heater. (Fit on the left side casing) then prop it upright, 2 black screws from under the top, fit on top cover, 2 silver screws at the backs inner side, and then 3 of the left screws. Once you've finished these steps, stand up, do some stretches & last but not least plug in the unit & see if it's FIXED.*
Are you working on the powered unit?!!!
What model it is?
Thank you. simple but effective.
It worked! Thank you!
Do I have to push the button when it’s plugged in?
My heating elements are broke. I was wondering where you buy your parts?
Thank you! This solved it :)
Hi, I have a Sun Twin. The heater elements still come on because I see the orange lighted area behind the grill but the unit does not blow air. Do you think the fan may have a fuse or reset switch.? I've yet to take anything apart. Thanks!
I have the same problem - could not find a reset switch and the fan is not working at all.
Does the fan have a high and low speed or is it just one speed
It has both
You don't have to jump out the thermostats,you can set your meter on continuity and test them with the heater is unplugged.The thermostats or thermal fuses are either open or closed,closed means it will carry voltage same as jumping it out.The only exception with these thermal disc's is one of them will be a temperature cycling thermostats but most of the time they should test closed when the unit is cool.
I cant get my casing out!! It comes put half way but, the wires are hooked the power button and I can't figure out how to disconnect them!!
Mine does the same thing!
I have a sunheat heater, fan doesn't work consistently, elements work fine- any ideas?
same problem here, fan isn't working... if you find solution I'd love to know!
@@williamgoettman1649 Just bought a similar one with 750/1500 watt options at Macs hardware 1/2 price for $60.00, bought a tall tower quartz rods infrared for $50.00 and like it best.
I took it apart and tapped the fan a few times now it’s working fine. I can’t find the switch to reset mine that he has in his
Tell me how come they won't heat though the switch it runs but don't heat
Do I turn the unit off before i push the red button? thank you for your video.
yes, then after it is pushed, turn it back on.
Mine didn't have those brackets on back. No clue how to get apart
Great video thanks, but please unplug things before you start taking them apart 🙏
Many thanks.
Thank for the information work for me
I have a similar one and Does anyone have smoke coming out the vents? and it's over heating!
I need a replacement remote for this heater
My duraflame 1500 infrared quartz cabinet electric (9HM1000-C240) space heater is noisy. It still heats--but really loud. How can I fix?
have one to there just super loud tbh
Hello I need your help
Mines only needed the actual power switch replaced. It was defective. Called the company and got it replaced free of charge
El mío no sopla aire, solamente enciende los elementos pero no hay aire, qué puede ser?
How do i get rid of E1 code om my comfort furnace. The elements work and the fan works,.
I have one and when it reaches the temp in the room and shuts the heat off ( cycles down ) before totally shutting off- it wont shut off it just runs the fan and after a while blows cold air - recirculating the warm air . so somewhere a switch isnt cutting off.
No, the fan is still going to cool the unit; for instance, your manual probably says not to shut the whole unit down, but rather turn down the thermostat first, to shut down the heating element, and let the fan continue, then use the on-off switch to turn it off. It's bad for the unit to shut it all off when it has been running a while.
Is anyone having their heater make a "boom" sound? Its not loud loud but its definitely loud enough to hear every time.
Mine got burnt for a loose cable in the breaker box❤
Mine keeps going to e1 why
Thank u so much haha I took the top instead of the side off mine and didn't see the red button
Hearing my friend hit his heater every day from him running it at 86 degrees non stop is like listening to Bam Bam from the Flintstones. His problem stems from tearing things up sadly.