Can you give me advice because after factory resetting my pc i got huge fps drops while moving my mouse, before factory resetting my pc i could play at 4000mhz pulling rate without any fps drops on my g pro superlight 2 now i can barely play on 1000mhz pulling rate, btw my pc specs is 3090 and i7-13700f so that's not low end like you said it the video.
Can you explain Windows mouse sensitivity settings vs mouse DPI? If I'm on a high DPI setting and increase Windows cursor speed so it remains useable it seems like the end result is the same as low DPI /low speed?...
0.33 Yes you are correct about connecting it to the back side of your PC but not on the 3.0 port please. Usually the ports on top where the PS2 ports use to be, motherboards have 2 ports that connect directly to the CPU for peripheral. The 3.0 port signal that goes through the chipset then to the CPU, dont do that. Direct connection to the CPU will reduce latency.
Guys after using those tweaks for about 1 month i can say just use windows default settings. I have had my sensitivity fkd up, been playing valorant,apex, league of legends and some single players, i just reset my windows and everything feels smooth now, i know u want those tweaks to work, maybe they does but for me it was a failure, couldn't aim in long distance, couldn't flick, i hope u get this comment and find it useful, just grind on the game and you'll improve!
how do you change polling rate on a mouse that doesn't have a software , i cant seem to find anything that works . i have a Mt-co11 and it says the polling rate is form 125 to 1000, how do i change it.
Good observation! From what I know 400 dpi has always been massively popular in counter strike. I think it’s due to mouse movements being mostly horizontal, where as in Fortnite it’s a mix of both. Also, it can be difficult to get used to a higher dpi outside of gaming (aka on windows) so I can see why the many don’t see the worth switching
@@mttrashcan-bg1ro yeah but some people are just stupid. some still say that the roblox fps unlocker is a virus like daaamn how empty is your mind haha
3200 DPI and 4000hz for Fortnite my Razer V3 pro. For normal browsing i use 1000hz to save power. I buy V3 pro from basilisk V2 and not worth money for upgrade i feel same performance only advantage is V3 pro not have WIRE.
im getting crazy stutters on 1k hz polling or higher using a razer viper v3 pro which is capable of 8k hz, is my pc old since i cannot play on high hz. im using a ryzen 7 5800x3d, 32gb 3600mhz cl16 ram, rtx 4070 super.
@@s3xood its nothing to do with internet connection since i disconnected my pc completely and played Minecraft java offline in a single player world and it still happens
Honestly, upgrade to what you can get (or what’s available or in your interest) If your keyboard or mouse is broken, you can do you own research to get a new and potentially better mouse
DPI stands for Dots Per Inch/checks per inch, so, it's a movement based detection, polling rate is the number of detections that your mouse do per second, you can understand it like DPI=Resolution, Polling Rate=Herz, they're not directly related to each other but it impacts in the final result, dpi/resolution gives a detailed picture and hertz/polling rate gives a smooth movement to the picture/mouse, hope you understand it better with my comment (sorry for bad english, I'm still learning)
If any of these Mouse Optimizations help you guys out, please drop a like! 👍 Thanks everyone
I was looking for a video like this 2 hrs ago
Can you give me advice because after factory resetting my pc i got huge fps drops while moving my mouse, before factory resetting my pc i could play at 4000mhz pulling rate without any fps drops on my g pro superlight 2 now i can barely play on 1000mhz pulling rate, btw my pc specs is 3090 and i7-13700f so that's not low end like you said it the video.
Can you explain Windows mouse sensitivity settings vs mouse DPI? If I'm on a high DPI setting and increase Windows cursor speed so it remains useable it seems like the end result is the same as low DPI /low speed?...
0.33 Yes you are correct about connecting it to the back side of your PC but not on the 3.0 port please. Usually the ports on top where the PS2 ports use to be, motherboards have 2 ports that connect directly to the CPU for peripheral. The 3.0 port signal that goes through the chipset then to the CPU, dont do that. Direct connection to the CPU will reduce latency.
what do you mean should i put it in the 3.0 port or not
@@worp6797 don't put it on the 3.0 port. Unless in future they make 3.0 ports directly connected to ur CPU, and not through ur Chipset.
in game my mouse would lag so bad but i just turned of the rgb and it works great now
Guys after using those tweaks for about 1 month i can say just use windows default settings. I have had my sensitivity fkd up, been playing valorant,apex, league of legends and some single players, i just reset my windows and everything feels smooth now, i know u want those tweaks to work, maybe they does but for me it was a failure, couldn't aim in long distance, couldn't flick, i hope u get this comment and find it useful, just grind on the game and you'll improve!
true
how do you change polling rate on a mouse that doesn't have a software , i cant seem to find anything that works . i have a Mt-co11 and it says the polling rate is form 125 to 1000, how do i change it.
talking about dpi, most of cs2 players using just 400 dpi and it is working very well
Good observation! From what I know 400 dpi has always been massively popular in counter strike. I think it’s due to mouse movements being mostly horizontal, where as in Fortnite it’s a mix of both. Also, it can be difficult to get used to a higher dpi outside of gaming (aka on windows) so I can see why the many don’t see the worth switching
No way i clicked on the vid when it said NOW instead of how many seconds ago it was uploaded
crazy best ive seen is like 4 seconds
that means you were on point, didn't even know it could do that
@@harriswone4215 ye same lol
how can i fix logitech superlight g pro x cursor stutters if i dont have that thingy that i need to plug in?
Thanks bud!
should have put the registry editor tweaks for mouse/keyboard in here they also help reduce delay
4:19 i have high end pc but i have stutters when using more than 2k
Nice vid🎉
RGB lights causing input lag sounds like a skill issue
Dont download the USB thing! Its a virus
What usb thing ?
The thing he said we gonna download
@@Valter556_Just because Windows asks with that blue box if you're 100% sure it doesn't mean it's a virus. A lot of programs do that
@@mttrashcan-bg1ro yeah but some people are just stupid. some still say that the roblox fps unlocker is a virus like daaamn how empty is your mind haha
The use default made me feel something ngl
3200 DPI and 4000hz for Fortnite my Razer V3 pro. For normal browsing i use 1000hz to save power. I buy V3 pro from basilisk V2 and not worth money for upgrade i feel same performance only advantage is V3 pro not have WIRE.
neevr knew theat thing was a reciever i never used it and now i sadly dont have it anymore...
You can buy a cheap one from anywhere. It's basically a wire to extend length
im getting crazy stutters on 1k hz polling or higher using a razer viper v3 pro which is capable of 8k hz, is my pc old since i cannot play on high hz. im using a ryzen 7 5800x3d, 32gb 3600mhz cl16 ram, rtx 4070 super.
maybe it’s low on battery or your wifi is bad i recommend using ethernet
@@s3xood 100% battery and i get 4 ping 900mbps internet over a cat 6 ethernet cable
@@s3xood its nothing to do with internet connection since i disconnected my pc completely and played Minecraft java offline in a single player world and it still happens
@@tommymurrayukis it a wireless mouse?
@@nolyfe4814 yes
i love u codelife
Which one is better to upgrade a keyboard or a mouse
Honestly, upgrade to what you can get (or what’s available or in your interest)
If your keyboard or mouse is broken, you can do you own research to get a new and potentially better mouse
As long as you have a mechanical keyboard and not membrane it's fine tbh
My dpi is 3200 and x and y 8.5
How can the dpi go faster then the polling rate ? Mouse polling rate 1000 Hz with 1600 dpi . Would it just be a maxium 1000 then ?
You need to see more videos about mouse
@@surajitdey4305 Thx for no info about anything, why even reply lol.
DPI stands for Dots Per Inch/checks per inch, so, it's a movement based detection, polling rate is the number of detections that your mouse do per second, you can understand it like DPI=Resolution, Polling Rate=Herz, they're not directly related to each other but it impacts in the final result, dpi/resolution gives a detailed picture and hertz/polling rate gives a smooth movement to the picture/mouse, hope you understand it better with my comment (sorry for bad english, I'm still learning)
@@taintedbosques2887 Thankyou i see, this was very helpful. I understand it now :) Good job on your english and have a great day.
don't turn off rgb you will lose 30% performance no rgb = less fps, and it's serious no joke
How is that possible
@JohnnyInkognito 😶😶😐😐👀👀
Mr lust settings plizz
step one:get a gaming mouse
hey could you look under that for me?
him: 4:49
here within 3 mins
me using 6400 dpi
Yooo first
first lets gooooooooooooooooooooooooooo
Here early
I use 12k dpi
theres no diferent in 6k dpi or more then that
💀
@@Mypic-isnot-what-it-looks-like u can tell a bit
I use 2.4k dpi