You're absolutely on point! I have a Texas Speed LT427 bottom end, stock heads w/upgraded springs, LS7 Cam, and a Eforce 2650 supercharger. I kept my shorty tri-y's and a factory cats... I'm making 768/690 rwhp/tqe... California legal. 😈... No Lopey cam or long tube headers because I had the bottom end built.
When you said with just boltons it got me interested. Then I saw a Magnuson. That's a very expensive bolton 😂. Good work though! I'll keep my 2023 ZL1 stock for now. Just wish I could put a cam to make it sound good at idle.
How much for same tuning for my 20 zl1 Camaro. Auto. Kooks green cats, kooks long tube headers, kooks muffler delete. lt4 stage 1 pulley. Stock supercharger. Roto fab intake. 22x10.5 rims and 22x9.5on front. Everything else is stock. Need tuning to get the 700hp and to match the rims size How much you charge. How do I contact you.
Andy I have a 2013 zl1 looking to get a cam installed how long of a waiting list do u have to get into ur shop? I had to wait months to get into the shop I have been using..
Tell Andy what you have done to it if it's not stock, he should be able to send a tune that's close. Make some pulls while data logging. Send data log to Andy and he can send you a revised tune.
I've had that flowmaster axle back on my ZL1 for about a year and a half and absolutely love it. 🤘 Been looking for some inspiration, any idea how these cars handle e85?
Andy, another great video, the ZL1 is a sweet ride, keep up the great work you always do an awesome job. If you think your son drives you crazy don't feel bad because my son is 31yrs old and he really busts my balls, I think he got that from me. Take care and keep making great videos.
Seems after Mike took his Car to Race Proven Motorsports and RPM took the car apart and totally trashed Andy's work, Mike never said anything on RUclips. Mike ships his cars out to be modified and not much video's with Mike and Andy together, so the car thing is Mike's actions speak louder than words. To me seems RPM influenced Mike's decisions about who works on his cars. So I think is funny neither DFR or RPM get Mike's cars to work on. Shipping a car from PA to Texas isn't cheep nor the mods cheep. Guess if you got the money....
You're absolutely on point! I have a Texas Speed LT427 bottom end, stock heads w/upgraded springs, LS7 Cam, and a Eforce 2650 supercharger. I kept my shorty tri-y's and a factory cats... I'm making 768/690 rwhp/tqe... California legal. 😈... No Lopey cam or long tube headers because I had the bottom end built.
Just found your channel with this video. I'm your southern brother from another mother.
Saw the EGA on the laptop case. I was 0351 back in the 90s. OohRah
3521 here boss, Semper Fi!
What’s the air charge temps??
Only a real pimp classifies the Maggie as a "bolt on" 😅
When you said with just boltons it got me interested. Then I saw a Magnuson. That's a very expensive bolton 😂. Good work though! I'll keep my 2023 ZL1 stock for now. Just wish I could put a cam to make it sound good at idle.
How much for same tuning for my 20 zl1 Camaro. Auto. Kooks green cats, kooks long tube headers, kooks muffler delete. lt4 stage 1 pulley. Stock supercharger. Roto fab intake. 22x10.5 rims and 22x9.5on front. Everything else is stock.
Need tuning to get the 700hp and to match the rims size
How much you charge.
How do I contact you.
Andy I have a 2013 zl1 looking to get a cam installed how long of a waiting list do u have to get into ur shop? I had to wait months to get into the shop I have been using..
Email me Diabloformula@hotmail.com
Email me Diabloformula@hotmail.com
Are these cars reliable when modded ?
Yes, extremely
time for a fuel system I know that feeling I ran out at 7psi
Still proves how much the stock cam is holding things back.
Don’t worry about your boy. You can sign him up for the marine Corps when he turns 17.
Damn straight! #USMC
What is mods list and part number/ names
lol, bolt on a new super charger
Tell Zach, Me and my kid are calling out the Clapped out shitbox! I know where it's parked....lol
I really feel like you should be able to hit 700whp on the stock supercharger...
you can easily
How much did you spend in upgrades to this car ? If you dint mind me asking
Email me Diabloformula@hotmail.com
The Maggie alone is $6,500 alone.
This platform is expensive. Fuel injections alone are $2,800 bucks.
Need help should I get a 2010 camaro ss?
I bought a 2015 1LE Camaro, love it.
How much money did all of those mods cost ? How much power over a stock motor did it make ? It seems that you spend a lot for just a little HP.
It does around 560whp stock
2:10 you can hear that nasty door ding, hope owner gets compensation
That was the hood pop ding dong
pushing the motor past were you are is dangerous IMO
Impressive its actually my favorite camaro variant zl1
Can the 10L90 handle that power stock? What upgrades are needed
10l90 can handle 1000hp 900whp
kooks mid pipe too?
how much does that cost? i have a zl1 2018 looking for some tune up!
Contact me Diabloformula@hotmail.com
Does Flowmaster make the dual mufflers for the Gen 5 with Npp?
Helll yesssssssss Andy dyno videos at Keith's Pit Stop. Awesome memories!
Yeah buddy!!!
Gettysburg sounds oddly close?🤨🤔🤔
It is pennsylvania😭😭 you guys are close mind helping me with my frs build?
those pipes are mean
I think this guy's on a tv show.
That's good horsepower. Was the 712 rwhp SAE corrected or STD ?
Is STD if you pause the video on minute 9:09 you can see std
That thing is sweet. Convertible ZL1 is a little weird though. It’s ok on an SS but a ZL1 doesn’t feel right
Andyyyy
I wish I was close enough to get my 6th gen camaro tuned properly, idaho has sh*** tuners
Ship it!
Tell Andy what you have done to it if it's not stock, he should be able to send a tune that's close. Make some pulls while data logging. Send data log to Andy and he can send you a revised tune.
Hey Andy on 10 speed 1to 1 is 7th gear figured I let you know
6th gear was showing 1 to 1 on the dynojet, I've heard it was 7th but we were sticking to what the dynojet was saying.
I've had that flowmaster axle back on my ZL1 for about a year and a half and absolutely love it. 🤘 Been looking for some inspiration, any idea how these cars handle e85?
Love yeah kid
Car sounds healthy Andy! Rare for me to see Flowmasters used on the LT4 platform. How much are you getting rid of the kid for? 😂
Make an offer!!
I got the same exhaust on my ZL1, been really good to me, lots of compliments on the sound.
Well done Andy,that things sounds real healthy
Thanks!!!
You don't do any work for Mike anymore?
Apparently not
Sweet Camaro
DiabloformulaRacing Great Video I'm glad that Incredible 6th Gen ZL1 made 712 WHP and I can't wait to see it make more
Hell yea there it is what I’ve been waiting for
WE WANT MORE CLAP OUT SH*T BOX VIDEOS
Hahaha a Magnuson bolt on 😂
Curious why he switched S/C the Lt4 is more capable of that 🤔
Andy, another great video, the ZL1 is a sweet ride, keep up the great work you always do an awesome job. If you think your son drives you crazy don't feel bad because my son is 31yrs old and he really busts my balls, I think he got that from me.
Take care and keep making great videos.
You should be making more, maybe the dyno isnt right? You should be around 800hp atleast...
We need a long range shooting video again please
Beautiful ride!! Great job tuning it!!
Thank you
What happened with you and mike I’ve always wanted to know
Seems after Mike took his Car to Race Proven Motorsports and RPM took the car apart and totally trashed Andy's work, Mike never said anything on RUclips. Mike ships his cars out to be modified and not much video's with Mike and Andy together, so the car thing is Mike's actions speak louder than words. To me seems RPM influenced Mike's decisions about who works on his cars. So I think is funny neither DFR or RPM get Mike's cars to work on. Shipping a car from PA to Texas isn't cheep nor the mods cheep. Guess if you got the money....
The perfect combo!
Notification Squad
👍
Are you ever gonna cut off the beard again Andy.
Nope
DiabloFormulaRacing lmao. I thought so
Eww a convertible
Open valves really got my saiyan juice flowin
First