Normally you'd make parallel cuts perpendicular to the length of the hinge. When all those cuts are made, you'll cut them out then start thin slicing into the wood to the desired depth. You get a smoother and more consistent base for the hinge leaves.
I know it’s a special bit just for drilling hinge holes. The outer casing of the bit sits in the holes and the the actual bit then moves down to plunge out the hole. Can’t think of the name
It's a countersink with a pilot bit. You buy the size for the screw you are using. That looked like a #10 or #12 screw sheet metal screw. A wood screw would be better for this IMHO.
@@heli400 Im serious though. If you don't use the chisel with the flat side up you have no way to control how deep it goes. Flat side up you can correct as you go but flat side down it digs itself in deeper with every hit.
@@benbrice9343 not for a shallow hinge ream out, do the perimeter first to the depth of the hinge, then flat side down. In a deeper rabbit, or mortise, ya I agree flatside up.
you never cut in from side first always lots of cuts down to line from top first then horizontal look at the state of the beds the hinges are on look like a 5 year old has done them
No no no, he did not screw in the holes the way I wanted them screwed, it doesn't make the darndest difference probably but you screw the one furthest away from you then the closest and repeat, I have staggered everything I do and it's probably just placebo but like I said it's just wrong not to stagger and I hate anything to the contrary.
Hoy me di de cuenta que las puerta de mi Mobile Home rosan debido a que el que la instaló puso las bisagra sin hacele la canal mi padre era carpintero y yo habia visto como se hace y virndo el video me refresque así que lo haré yo misma
In spite of several criticisms, this seems to be a job well done. Love the special drill bit.
that drill bit is one of the most coolest things ive seen
Me too
Normally you'd make parallel cuts perpendicular to the length of the hinge. When all those cuts are made, you'll cut them out then start thin slicing into the wood to the desired depth. You get a smoother and more consistent base for the hinge leaves.
Who on earth taught you how to cut in a hinge .....?
The chisel wrecked that wood try sharpening it
Why! The BG music ruined all my satisfaction and gave me anxiety.
Those pilot holes looked way too big..
A router is 50 times faster than a chisel
I thought this was how to fix hinges, not install them lol
Must be a Southern way of saying install.
I’m fixin to correct your comment sir!
Fix has multiple meanings.
@@MrSladej yes sir lol
Wow,its second Columbus...lol
I will teach you.... How to do this .. with.....only ......one Screwdriver......
You should put the screws directly into with the drilling machine without make any holes before, otherwise the hinge might come out after some time
If you screw it directly the wood will split and then you got nothing
pilot holes are the essence of a good fix...
Vc precisa fazer um furo mais fino que o parafuso, assim nao corre o risco de folgar
Que pieza es la que se usas antes de poner el tornillo? y si viene para aluminio
My partner is a professional carpenter and even i know that demonstration of cutting hinge pockets is poor ( sorry)
What you use for the pilot hole? Doesn’t look like a normal drill bit
I know it’s a special bit just for drilling hinge holes. The outer casing of the bit sits in the holes and the the actual bit then moves down to plunge out the hole. Can’t think of the name
self centering drill bits i believe
It's a countersink with a pilot bit. You buy the size for the screw you are using. That looked like a #10 or #12 screw sheet metal screw. A wood screw would be better for this IMHO.
@@Kristinapedia they’re Pozidriv wood screws, like the kind you get with IKEA flat pack furniture
@@zimzob That's the head type. But they are still sheet metal screws.
خرب يومكم يا الاجانب اشكد أنغوله بس والله يجي يوم اجيب هاي الغراض كلها من عدكم و بفلوسي اكيد اشتريكم
That’s right that’s how you do it professionally
You used sheet metal screws. Wood screws would be better.
There is no fix. Nothing was broken. Wish you would put correct titles
@Aidan Lapp hmmmm. But there are better words like to install or to fit a hinge
@@analogdistortion Well fixing it is literally what he does. He fixes the hinge to some wood with some screws.
@@BjornGrylls haha, no. Don't talk about things you know little of with authority
@@analogdistortion No problem, I'm not trying to be smarter than you. I read the word "fix" as "repair" too because it's overused on the internet.
@@BjornGrylls But you're declaring truth instead of questioning and suggesting. The word you're thinking of here is "affix".
Tighten both the corners first. They don't wiggle when you tighten the middle ones.
Also, drill and screw in corners first before drilling middle
Good work
Thanks for the tip again! :)
To isme kya ye to mere gaav me anpadh dada ji bhi kr dete h wo bhi isse clear and fast 😂😂😂
So satisfying...
No será mejor hacer el sacado en la madera de un solo lado, así por ejemplo en una puerta tienes la ventaja de subir o bajar
Why not have the edges be close to eachother?
Maybe I am off my hinges, but I believe you. But my tommygun don't.
Oh!...
That's how that is done.
With what kind of drill did you drill
It's a wrong method. You should never drill holes before putting screw. It will be loose. Screw directly on the wood.
If the holes are not drilled the wood has a higher chance of cracking.
The wood will split. You guys always try to find some little tiny excuse because he does something you don’t like
So what you're saying is that The 80s montage music should speed up the job?
Some one who want to try this at home plese cut the required part to be joined to get this perfection
Fantastic Video sir I
Very hard work bro
Skill 👍
Good job my frend
Good idea 💡
When I fucking hate putting hinges on
Я не понял, это петля между чем? Между двумя досками?
🤣🤣🤣🤣я тоже самое подумал
Cool and informetive
It's how to install not how to fix it 😅
Same trick doing form last 6 years and my dad from 20 last year😂😂😂
Shocking, shocking , shocking!
But... But i never knew that watching screw being drilled in can be so satisfying 😭😭
Does the trick but I'd say a router will probably do you a little better.
He man how much price this machine tell me
Я почище эту работу делаю . И Стамеской режу древесину ,а не выдалбливаю . И таких щербатых ям у меня нет .
Рукожопство своё рекламируешь ? Молодец !
Искал этот комент. 👍😉
Грязная работа..
Good method.
I bet those screws poked out the other side... and us professionals use a jig and router for hinges not a chisel
Iam your fan❤️🔥
Ye toh mene socha hi nhi
Phir sacchimai aachivideohai
There’s a better way than this (still similar tho) to install a hinge without that slop that you can see on the right side
At least he is using the chisel the right way.
@@benbrice9343 lol, I missed that,.... the right way to get a rough edge! haha
@@heli400 Im serious though. If you don't use the chisel with the flat side up you have no way to control how deep it goes. Flat side up you can correct as you go but flat side down it digs itself in deeper with every hit.
@@heli400 The cut for the hinge was super rough though. Lol
@@benbrice9343 not for a shallow hinge ream out, do the perimeter first to the depth of the hinge, then flat side down.
In a deeper rabbit, or mortise, ya I agree flatside up.
Sonicewoodcraft
That's called perfection
નુગર
Ru😭
.
So how do you fix it?
Eso es empotrar para un acabado estético
Como se corta el metal para despues dobĺar de cuɓa
Настоящий колхоз, я бы не удивился если бы он топором вырубал а гвоздем отверстия делал.
Nice
Why drill crew it directly...
en melamina también se instalan
Very nice ❤️❤️
What was wrong with them in the first place to where they'd have to be fixed? Just seems like you were installing a fresh hinge.
He was. To show how it's done.
I assume he is from the South or something, like when they say they are going to fix dinner.
you never cut in from side first always lots of cuts down to line from top first then horizontal look at the state of the beds the hinges are on look like a 5 year old has done them
شکریہ
very nice
че за сверло?
Engineers choice
Fua la re vivís Scooby
Good
Why u use low speed screw
🥰
Clean................
Jab sara jogad ho to sab kuch aasan hota hai beta😎
Amazing
Affix the hinge.
Bro bolts bigichukunna michin nema anti
Que facil se ve lo nesesito hacer para poner una puerta en mi cuarto
👏👏👍👍
No no no, he did not screw in the holes the way I wanted them screwed, it doesn't make the darndest difference probably but you screw the one furthest away from you then the closest and repeat, I have staggered everything I do and it's probably just placebo but like I said it's just wrong not to stagger and I hate anything to the contrary.
@thatguy 00 Okay, I'm all grown up now! Thanks for the help!
🤣
Bisagra para madera
Background music name
to be honest that's not a professional way but as DIY is ok
You directly screw them.....no need to drill. This will save time and make this full proof.
Don’t be a fool!
✌️✌️✌️✌️👌👌👌
Use #Shorts in ur videos and u will get more earnings
Hoy me di de cuenta que las puerta de mi Mobile Home rosan debido a que el que la instaló puso las bisagra sin hacele la canal mi padre era carpintero y yo habia visto como se hace y virndo el video me refresque así que lo haré yo misma
Pehle dono me ek ek kil lagao
🌹
That chiseling looks horrendous clean it up and flatten it out God dayum 😬
This is satisfying
some asian Woods are hard,event nails couid not penerate
Батя бы гордился
100 years old method
This my problem..
No way!
Не прощу купить петли типа бабочка
Попробуй вымеряй с кривыми полами на дверь с двумя створками
🙋♂️🇮🇳
Hi