convert atx power supply to car battery charger
HTML-код
- Опубликовано: 18 сен 2024
- Charge with computer power supply car battery or how to charge the battery with 12v power supply, utilize old computer power supplies. Computer switching power from 12v to 13,8v and 14v to 16v 10A, 15 Ampe. Demand for rechargeable batteries of all kinds, very simple. I switch the source of an integrated computer ic 7520 or AT 2005 WT, 8990. LPG and I change the type of protection ic and use separate oscillators, such as AZ 7500, TL494
guide how: how to reduce amps on battery charger: • how to reduce amps on ...
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
I feel thankful this reconditioning plan ruclips.net/user/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 was founded. I was just about to throw out Three old batteries that I thought were completely dead. Having said that, I tried reconditioning them and it took me less than an hour to acheive it! No matter what type of battery you like, the procedure will work.
Despite the language barriers, you did an excellent job that everyone, except the average american, can comprehend. Thx
Oh, I really thank you
click on closed captions and select the language you want
I use 27k Resistor on my Salpido 500W power supply and I got around 13.5v 24A
ok
Which pin ? I have 7520 ic
Alfred increíblemente sencillo tu tutorial, gracias por compartirlo.
Para los que les interes y tengan una red domestica de 110V reemplace la resistencia de 7ohns por una de 14ohns.
Alfred incredibly simple your tutorial, thanks for sharing.
For those who are interested and have a 110V domestic network, replace the resistance of 7ohns by one of 14ohns.
thank
i dont know what you saying but understood what you doing great video !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Good tiching 👌👍👌👍👌👍👌👍👌
Litle litle English pls :) loved what you've done
Does the size of resistors (watts) matter? because I put small watts and when I plug 55w halogen lamp and the power stops. ?
VERY HELPFULL PROJECT,THANKS...
Terima kasih, sudah berbagi pengalaman..
hi alfred great tutorial, i have psu with ic wt7520 and i follow your guide, but i dont have 7k r, i use 7,5k r on pin 16, and 2,2k on pin 1,2,3 but psu not working, what i miss sir, please guide me, thanks in advance
Thank you it's really work good I did it! thanks for your help
Hi Alfred thank you for the video i made the changes in a ATX and work great i was on the need to charge a battery and no money to get a charger so this work out real good i charge 2 car battery whit it I wonder if is possible to make a variable power supply whit it to thanks again great video
You can use a strong atx source kit.
Thank you
i want to charge my car bettery with computer power suply. But in power suply there is a yellow color wire having voltage is 12v thats ok,,, but ampere is low as about 1ampere to 2ampere only (which is not suffient to charge my car bettery). My problem is that how to increase the amperage of (yellow 12v wire) so that it charge my bettery easily.
regds,
thanks. plz reply in detail to solve my problem
Although I am late viewer of this video but its very informative, THANKS a lot.
I do not know what to say, besides thanking you
yo cambie un poco el diseño y observe que al incrementar la resistencia en el pin 16 tambien se incrementa el valor del voltaje de salida, por lo tanto lo unico que hice fue eliminar la primera resistencia que va conectada al circuito desde el pin 16 y remplazarla por una de 20K espero les sirva
very good,...May be added for other ic types
I will try to add more ICs
ok...thak you brother
Really good job, I have this type with TL494, I ask are the resistors on pin 1 and 4 of TL 494 connected to the minus pole or ground (black wire) ? After that completed is short circuit protection works normaly? I would charge car battery 55AH with max 5,5 Ampers. Thanks for answer!
if circuit protection is still active
then you can be connected in series via a resistor 1-2 OMH 5-15w
for charging batteries
i want to charge my car bettery with computer power suply. But in power suply there is a yellow color wire having voltage is 12v thats ok,,, but ampere is low as about 1ampere to 2ampere only (which is not suffient to charge my car bettery). My problem is that how to increase the amperage of (yellow 12v wire) so that it charge my bettery easily.
regds,
thanks. plz reply in detail to solve my problem
i want to charge my car bettery with computer power suply. But in power suply there is a yellow color wire having voltage is 12v thats ok,,, but ampere is low as about 1ampere to 2ampere only (which is not suffient to charge my car bettery). My problem is that how to increase the amperage of (yellow 12v wire) so that it charge my bettery easily.
regds,
thanks. plz reply in detail to solve my problem
Ok, I made it..
successful
Congratulations for your success. I hope there are many people who succeed with my videos
Hello;
Tthank you.
I'd like use car lternator to power on hashboard asic miner(l3+ 800w that ha 4 of them and any of them got 250w)
The car's aletrnator output is 14v
I need circut for convert 14v to 12v for power on the hashboard. That runs by 12v 200w.
My idea is generate electricity with mown engine. Whitout use convertor 12v dc to ac 220. I would like to use 14v for power on asic directly whitout power modules. (220v 1600w)
Can i use Atx to convert 14v to 12v with 20A or higher? I need a circut for this convert. For lower cost. My asic has 4 of hashboards.
Are the voltage and Current damage hashboard?
Is it possible?
What is your proposal?
I have a dell PC power supply. The IC is WT7507. Please give me some advice to modify it to 13.8V. Thanks.
Hello anh Hải. Như vậy với IC 7520 cuối cùng anh gắn 7K ohm ở pin 16 và 2.2K ohm ở mỗi pin 1, 2, 3 phải không? Và với TL 494 cuối cùng anh gắn 13K ohm ở pin 1 và 10K ohm ở pin 4 phải không? Chân thành cám ơn anh.
your first method shows about at2005 chip, is at2005 and 2005z are same??
Tenkyu mersi:-) 👍
Which is two resistance add on ic wt7520 pin number 16 ?
Using the 10k alone enough?
Will using the 10k alone be enough to increase the voltage to 13v
I wish you good work.I have 4 ATX power supplies.There is a 2005Z pwm controller.At high current, the power supply is switched to protection.How can I cancel this protection? I'd be glad if you could help me.
Hello
I have a video about ic 2005 in my channel, you can visit and refer
Hello
I did not find any information about your IC 2005Z on your channel.You have indicated that you will prepare a video about this.Do you specify exactly where in your channel? On this video follower named Luis Salguero also asked you about ic 2005z.But you have no answer.
No entendí nada pero comprendi el diagrama del circuito integrado. Tres resistencia de 2,3 k en serie.
very good!! I do not understand the 2 ohm ceramic resistor to test the source. Is this resistor connected to 5V or 12V so as not to trip the protection circuit PWM ? If that is possible, I would have the. download subtitles. thank you!!
ok, use resistors 2 OMH is to check the source of ATX. To see the number of volts can be down low?, Before providing it to the charging
I will try to download subtitles
you can also use to mount resistors 2 OMH serial battery charger,
it will not be overloaded
I really liked your video. Thank you very much for the instruction. Health peace and long life !!
the ceramic power resistor pupose was to be tested as a dummy load
Can you tell me how to convert ATX with IC2003 in car battery charger. Thank you
I have downloaded subtitles
Awesome
Awesome experience
good job
I want to ask about IC : HS 8108 inside of power supply
There will be many types of computer source oscillator ICs. I will give you early if any time
Very good.
Highly dangerous only experts should try
what is the max output current
can i ask you if you remove any components or parts before you add those resistors? i ask you this because i saw a similar video like yours, but he removed some of the original parts of the PSU. i'm planning to make this because i have the power supply (with TL494 i.c.), thanks.
Can you tell me what you use?
....what do you mean what i use? what i have right now is a psu with TL494 i.c. which i'm about to convert it as a 12volts car battery charger just like what you did in your video. and what i would like to know from you sir is, do i just solder 7k ohms resistor to pin #16 and 2.2k ohms each to terminals 1,2 & 3. without any other alterations on the pc board of the psu,
thank you very much for your reply.
Have a nice day 3.3V / 26v lab chow Or How to do a video about it? (Potency ether) thanks response
Your idea is to make a power supply with voltage range from 3.3 to 26v?
yes 26v max 2Ampere
nạp bình axit nước thì khi nạp đầy bình nguồn atx có tự ngắt ko a Hải? cảm ơn
muốn tự ngắt thì thì phải làm thêm mạch tự động cắt điện. có ở trong kênh
hi alfred...i have a psu and the ic is J04M82 but no manufacturer's name on the ic. what video do i follow to charge an APC psu battery? the battery is completely dead. help me. thanks.
You follow another ATX video in my channel
@@AlfredH can you be specific alfred on what site?
go ahead sir.....🙄🙄
Hello Brother Sir Alfred, Hiriam here from the states, your vidieo is easy to follow but being able to understanding your language ?? :-) im wanting to build one also , hopefully up to a 25 amp for deep cell 200 mha battery. if theres a translation option here i'd love to know how/where . Have A Grand Day
You want to charge 200Ah. You must use a good computer power supply with a capacity of over 500w. In the next few days I will post a video
Thank you worthy brother, i have seen a charger for 12v made from microwave transformer ? not in detail enough , esp for a 20-25 amp , ?? Thank you and looking forward to your advice
Hello bro Alfred, looking forward to the advice/vidieo ? In my quest/ need for a 12 vt 25 amp battery charger for my deep cell solor battery"s Thank You Again
i want to charge my car bettery with computer power suply. But in power suply there is a yellow color wire having voltage is 12v thats ok,,, but ampere is low as about 1ampere to 2ampere only (which is not suffient to charge my car bettery). My problem is that how to increase the amperage of (yellow 12v wire) so that it charge my bettery easily.
regds,
thanks. plz reply in detail to solve my problem
Nay đổi tên có
How to convert my 50v 160 amp inverter DC welding to battery charger please:)
What about sdc 2921 ic. Pls
can i use 2 10k resistors and 1 5k resistor for 25k at least will 25k work anyways?
bro I have baz 78150415h ic how will i connect resistor to these ic please tell me
i want to make a battery charger of an computer powersupply.How can i increase the 12 volt voltage to 13,8 volt of this model powersupply.PowerMan (InWin): IP-S300EF7-2. I hope u can helpt me. There are 2 ic sk233 has7pins en R7510a has 8 pins.
Breliant job thanks man
thank you very much
Hi teacher how convert adapter 12v to 14v or 15v
thanks a lot of this...
thank Ka Riche
what is the max output current
14,6v higt voltage test 13.8v
i successfully modify my computer power supply but i am facing one problem when i connect power supply with battery(12 volt 80Ah) terminals (power supply positive red wire with battery positive and black wire with battery negative) fuse blows (which is connect with positive wire 13.4 volts). i tried 2amp, 5amp, 10amp and 15amp rating fuses. how to control charging current. i think there is no current limit in charging that's why fuse blows. thanks.
You can use a small round ferrite core, use 1mm copper wire wrapped on 2 or 3 mounting rings to reduce the number of Amp as you want.
What should I do for TL494L? I did not try.
Can you ask more clearly?
what is the bgm music of your vedio tell me
very nice
thank you very much
my smps has 2005z chip. how to modify it to 13.8v output?? please give detailed solution. thank u.
I will have the video as soon as possible
I will be waiting for this video too, I have the 2005z IC as well
Good job my friend
thank you very much
@@AlfredH sir good video can u tell me that how to convert TL594 ic power supply in to 14.8v
whether it is safe in use continuously??
you can connect via a resistor 3 OMH, for charging
ok. thank you bro
good
thank you Krung Krung
Can I use only the 10k ohms
ok you can use 10K ohm. If the output voltage is not satisfactory, you can add a resistor in series
sir my smps ic is 2003 baz 78150415h how to mod these smps to charge battery
I got 7515 is it ok?
ok so i used 2 10k resistors and a 6k resistor it seems to be running but i dont have a tester
You can use a 30w bulb to try it out
can I use first method in 2005z chip smps???
Agreed, IC 2005 I have ranked it equivalent in the first list
so first method for 2005Z IC??
Untuk ic 7500 itu untuk aki besar bisa nggak... normal charge dan fast
There is another video in the channel
how do i know whether my resistor is 27k or 26k? i dont have a tester
You will read the color on the resistor:
red, blue, orange = 26k
ok cool
how muck k is orange purple and grey?
You see this is understandable: ruclips.net/video/Ev70q_bSfZc/видео.html
Sorry is of 7Kohns to 14Kohns
My main PWM controller is an L6598D and PFC controller is a UCC2818AD. Is it posible to mod too? here are complete secs to my psu: www.jonnyguru.com/modules.php?name=NDReviews&op=Story3&reid=129
on L6598D i have 50k ohms resiatance between RFmin(pin4) and GND (pin10), and 12V psu output. So i i want 14.2V output what resistor should i connect parallel to RFmin and GND pins?
Thanx.
broken link
Do you have any schematic of final circuit with AS 7500 TL 494?
do you want to talk about voltage rise diagram to 14v? with ATX TL 494
@@AlfredH About the 2,2 resistor with you use.
R2k2 = color line is red, red, red
@@AlfredH What's the finality of that power resistor who you use near the final of the video? For test only?
What iron
?
kenh kia cua a hai bi died roi
trang vominh ...........who died?
Hah hah.
?
Which is two resistance add on ic wt7520 pin number 16 ?
I have instructions in the video. please review carefully
@@AlfredH I know but 10k and 7k both ? It only 7k difficult to find
@@AlfredH what is the max output current (Amps?)