Kangaroo Stew # 366 Shed Chat and the MF20 Bonnet
HTML-код
- Опубликовано: 9 сен 2024
- Hello, I'm Lance (aka Bundy Bear), and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advice to customers.
Parts seen in our videos can be purchased from www.queenslandt...
We have a lot more than we can offer on our website available to us and in our store. If you don't see what you would like please email info@queenslandtractorspares.com.au or call 1300 850 097 and we will help where we can.
I do try and help with technical advice at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
#bundybearsshed, #crcindustriesau, #tractorrestoration, #tractorrepair, #tractorvideos
Great stew Lance as always. It was good to recognise Rich Beeson and both he and his family appreciated it. The MF 20 does look very good on the bonnet. That is a good tip to connect the two batteries in parallel to recover the very flat one. Good luck.
Thanks Peter, wait until you see what he is sending me, Im a bit excited about that one.
Nice looking boxes, at least in video, with those pallets, almost look like mine carts.
We will have a big fire with the pallets one day, we get heaps of them in at QTS.
I know what you mean," My get up and go got up and went ". Take care. Cheers
Yeah I dont like sitting about much.
Great Stew Lance - certainly keeping yourself busy - the MF20 bonnet looks a treat, should look great along with the mudguards!
Yes there is some work in it but nowhere near as much as a paint job.
G Day Lance, another great stew there, I'll be getting myself some of the CAV lapping compound for future use, your MF 20 bonnet's looking good but I know if I tried that with mine I would have nothing left lol
it's great seeing blue sky again, we;re back to grey again today.
many thanks
Barry
Thanks Barry ,we are having a rainy day today, up to 25mm apparently which will be good for the trees.
Hi Lance, I hope you don't mind, I told you last week about a pump on a David Brown 990 that was smoking after a pump reseal. We realised today that we hadn't bled the bottom bleeder on the cam advance mechanism . Did that, and the smoke instantly went!! Obviously, it is not advancing the pump cam. Another lesson learned.
Well I had not thought of that myself, good work.
Any day in the shop is a good day, when the weather is nice, its a great day! Thanks!
That is for sure.
Lance if you run into the 'really' flat battery problem again with the CTEK battery charger, while you did really well by connecting it up in parallel with another battery, good move.
But next time just put the CTEK in the 'Power Supply' mode for an hour or so, and then try it in the 'Normal' mode again, and finally when it's done with that and floating on Green, throw into Recondition' mode to give it a full wake up (if it's not already too badly hurt).
ok thanks, I did try the power and rejuvenate but only for a few minutes and gave that away. It seems to have recovered well thankfully.
😊Well Thank you for the mention Lance,,I’m a happy man today,,Never thought I’d be on the Stew,,Every member of my family will be made to watch this several times 😂😂 Thanks again and hopefully the present will be with you soon friend 👍🤠🚜
Happy to give you a shout out, I meant what I said we meet some great blokes through RUclips. You could strap the family to the chairs with a load binder or two eh😂
Post up the 'beast' page plz fellas....
About polishing, do not use a wax with silicone because it is difficult to put paint on top of it afterwards. C u next time 🇩🇰
Yes I have been there before, it gets right in and even then I have had to use silicone drops in the paint.
@@BundyBearsShed or a lot of thinner to wash the silicone away 😊
The mf 20 will look brill show queen's all looks the same when they have had there history taken away in place of a better then factory paint job but ha ho that's just my preference Lance 😂
Mine too but I dont often get a chance to find one that hasn't had some sort of crap paint job over the years.
We just started our summer season in the states. Right now in the mid west the high tops out around 98 degrees f. With a heat index of 108.
That should get the juices flowing.
Lance you're obviously busy - but did I miss something, have you given up on the Mk2 65 ? Was looking forward to those epicyclic final drives! Stay well mate.
No I hurt my knee and Dr told me to not do any heavy stuff for a while so Im trying not to do the final drives for a while. Im doing lighter work for a while.
Ahh thanks, yep, you gotta look after yourself first. Hope you’re on the mend.
There are sponge sanding blocks Lance. I wrap around them 😀 Did you try your angle strip discs yet?
Yes the strip discs went ok. I find I do prefer the needle scaler on castings as it leaves the rougher texture. I have always just used the flip-flops for sanding. $9.95 and I get 4 to 6 blocks out of them, old habits I suppose.
Whatever works 😀
I used to have one of those seats. They are good but if you leave the tops off the cans you can end up with a wet leg 🤣 pine here is much better than the stuff we used to get in the UK they grow it real fast there.
I was thinking that may happen. lol.
Do you have a drawing for the seat adaptor on the 135?
No it is a MF thing that came on the multipower 135 though.