⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: ruclips.net/p/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj
Hello man, i have a question if you mind, i have front headlights from renault zoe and both megane and zoe uses same headlight ecu, so i’m gonna install led lens, blinker and drl to my motorcycle from the zoe’s headlights but i couldn’t manage to activate drl led’s, i can get to work low beams, high beams and blinkers but i couldn’t activate drl, do you know the solution?
Hi mate you are really doing great jobs. There is a setting for DRL always with full power (always bright) they not fade to low when you open headlights. Do you known this setting?
Hey Michele, thank you very much for some very interesting videos. I have only recently found your page and have tried some mods, which are great. My question is this. I see various red boxes with "No data" in them, can you explain what this means? Thanks in advance.
Grande Michele!!! Grazie per îl tutorial!!! Ottimo lavoro!!! Complimenti!! Ti volevo chiedere, per la Clio del 2017, Clio 4, o 5, non lo so,🤔. Come si fa, che non trovò la voce sailing, nel menu upc-emm?? Nella talisman ci sono riuscito!!! Saluti e buone feste!!!
Ciao! allora per quello che riguarda la clio del 2017, è la clio IV.. io ho trovato questo.. PERO' NON SO SE E' LA COSA CORRETTA!! SALVATI SEMPRE I VALORI ORIGINALI!!!!! allora vai su clio IV (X98) -> UPC-EMM -> EMM_EDISON_DDT2000_SW15_2_V1.0 -> EMM_LIGHTING -> EMM_LIGHTING_CONFIGURATION e qui dovresti avere i welcome e goodbye da modificare come per la megane
Michele Predieri Grazie per la risposta! Sarebbe probabilmente luci di benvenuto?? Se fosse così, da me sono impostate su on, però le anabbaglianti non si accendono... saluti🙋♂️
Hi. I am looking for solution and maybe You can help me. I have megane iv and I would like to change moment of opening side mirrors when option welcome lights is on. Welcome lights connected with hand free cause the side mirrors to open every time I approach the car and close if I walk away. If the greeting lights option is disabled, the mirrors open only after the ignition is turned on (pressing the start/stop button). I would like to keep the backlight only options, but change the moment of opening the mirrors to the moment of turning on the ignition. Do you know where to set this in dd4all?
Thank you for explaining everything so clearly. BUT, I jave a Megane 4, phase 2, and the ECU's are called differently. How do I know which one to change?
hi MicheleP, i changed the dashboard of my Megane 4 with that of the Kadjar, now i have a fuel autonomy problem which is not correct, i have the DDt4all and Elm 327 software in my possession. please help
Thanks for your previous help. I've enjoyed making some modifications. Do you know if it is possible to turn off the beeps when the alarm arms/disarms? . Thanks, Pete
Hi Michele. I have some questions. "REMEMBER TO WRITE DOWN ORIGINAL VALUES BEFORE DOING THE MOD!! AND REMEMBER TO LOCK THE CAR FOR AT LEAST 10 MINUTES TO LET THE ECU's TO SHUT OFF!!" Why should we lock the car for 10 minuters? We can't remove de adapter before that? "Procedure is very very easy, just remember to do the Reset SW of the R-Link2 otherwise this mod won’t work!" Actually I changed the LED sequence for "goodbye" to the front LEDs without reseting R-Link2 and when I lock my car, I can see the new sequence. Another question. Can we make this changes with engine off? I changes de front LED sequence with engine on, but I would like to know if we can do it with engine off to not have the engine on all the time while testing different sequences. Thank you in advance.
Hello! Is there any chance to fully activate Multisense for cars without electric parking brake and no multisense button? I was able to make the multisense menu to be accesed through the R-Link, and seems that pressing the ECO button triggers and enters the multisense menu. But the other modes (sport / netrual / comfort) are doing absolutely nothing. I would appreciate to have a stiffer steering wheel or better gearbox response. Thank you very much! :D
hello to you. I have a problem with the side mirrors (Renault Talisman ) The lower lights do not illuminate after the display has been replaced. Welcome / goodbye is enabled in dtt4all in bcm / mmi. is it a coincidence or a fault? The other mirror functions are working. Any ideas ?
Ciao Michele, ho scoperto ieri sera per caso i tuoi tutorial, ti faccio i complimenti perché molto utili per chi come me, vuole smanettare nella propria auto con piccole modifiche.....questa storia di personalizzare i lampeggi delle luci all'apertura e chiusura dell'auto mi intriga parecchio😁, ho capito che i valori delle varie voci sono 0 spento e 100 acceso, non mi sono chiare però tutte le voci, da 1 a 63🤔 perché così tante? Grazie e complimenti ancora!!!!
Hello Michele, from the netherlands. I own a Scenic 2014 with R-Link 2 and i read Version 1.2.20130314.1 Can i update to a version so i can use the DDT4ALL also ? I like what you are doing, and your English is good and informative So go on and make more tutorials.
Michele, thanks a lot! I have the same car here in Ukraine, and do all the tips you discovered in your videos, except CarPlay (I have 2.17.2.803 R-link version, do you know how to upgrade it or tell me please some other ways to get CarPlay into my car?), its very cool!!! So wish you all the best, looking forward to new videos))
Unfortunately CarPlay is not available with version 2. Even if you change version to 7 or 8 and change USB ports. The main reason is that 2.2 does not have specific hardware in the main board
You can get 3. Something through an USB key, with a special script. Then you can activate Android Auto and carplay through another USB script that allows you to enter developer mode on the R-link, then you just pin the carplay in the developer menu 😁 IT Works for me with Android Auto. But i did it along time ago, so i dont remember the links. Try seach for "R-link developer mode carplay" something like that 😁
boas Michele e muitos parabéns pelos vídeos que postas ajuda me muito, tenho um problema, tenho uma megane 4 de 2017 no R-link 2 deixou de aparecer a imagem da minha megane 4 e aparece a imagem da G Senic como resolver pois comecei a usar o DDT ALL gracas a ti e tenho resolvido algumas mudificacoes espero ajuda e parabéns mais uma vez espero que continuas.
Buongiorno Michele, I have a Clio RS Sport IV 2017 and I want to stop the air conditioning turning on every time I start the car... is this possible... Very good videos, keep up good work
Hi Michele, congratulations on the videos you post. Have you ever had the "E_TM_ScenarioStep" parameter not changed? The ECU replies: "WRONG RESPONSE: Service not supported in active session (7F2E7F). By default it is 0.08 and I would like to change it to 0.16, but it is not possible. Thanks for the reply.
Hi there! Thank you very much for your useful tutorials! You are the kind! I have a problem with my R-link 2 on my Kadjar: he needs almost 60 sec till it's awake. Booting it's really slow. Already tried updating but problem still persist. Any suggestions?
@@MicheleP yes, l tried this also, but without any luck. When I'm staying the car, l have to wait almost one minute till Rlink active ist, I have no pack sensors and backup kamara in this time. It's really annoying... What it's weird, if l stop the car only for maximum 5-10 minutes, l don't have this problem anymore.
Thanks for the video michele! So if i want a slow burst of the leds 2 times i have to calculate how much each step is? there are 64 steps in total so 32 is the half: 100(full led color)/32 steps= 3. So that means that the first 32 steps have to be increasing with 3, starting from 0 up to 100. This is the first burst. Then the second from steps 32 to 63 is exact the same? I think with this you create 2 slow bursts of the leds? I see in youre video with goodbyescene 63 to 62 that you take a jump from 0 to 10? I hope its clear for you :p
Ciao Michele! Complimenti per il canale. Io avrei una richiesta, ho una Megane GT. Quando la metto in modalità sport noto che anche le casse interne simulano il rombo del motore, ma ahimè è troppo basso. Vorrei capire se è possibile con questo software variare il volume dato che dal RLink non riesco. Spero di essermi spiegato bene. Saluti da un Centese! Cento (Fe)
grande Centese! io purtroppo non ci abito più da qualche mese a cento! comunque, hai provato a cambiare dal multisense il suono che esce dalle casse e mettere in sport? se lo lasci in confort si sente poco poco. io quando lo metto in sport dalle casse esce un bel sound!
@@MicheleP Apperò! Allora ogni tanto mi beccherai sulla Cispadana a stiracchiare un pò la macchina ahah! Si ho provato ed effettivamente il sound esce. Ero solo curisoso di capire se si potesse enfatizzaee quel fantastico suono. Giusto per gasarsi un pò di più ;)
Hello please I like your Tutorials but I just bought a 2021 Renault arkana I want to learn how to make the front light to blink and the back led light to blink,I followed your tutorial but it didn't work for my car.Thanks.
Hello! I had problems with following this tutorial. The parameters I changed didnt effect the ligths the way I wanted. The original parameters weren't written like the ligths were operating, and when I changed them, they didn't change totally like I programed (fade wasn't smooth, and there were some off times although every parameter had a value) Now I changed all the values to 10 (like it was originally in welcome scenario ) and there is some fade effect... I don't get this at all
Hey michele! Just wanted you to know that i changed everything starting from 0 then 9 and then everytime steps of 3 until 100 (thats scene 31) then beginnen from 32 again with 0 then 9 and then again steps until 100 (scene 63) i changed the length of the scene to 0.20. It looks good but its not yet the effect of the slow burst to a full burst, maybe because of the leds? If i make the scene longer then 0.20 the effect will be better visable? Thanks man
Hey! Well actually I noticed that the fade is not so smooth (actually it seems that steps aren’t 1-2-3 ecc but more likely 10-20-30 ecc). So yes, probably with 0.20 seconds they will behave better! I’m wondering to program the leds to perform with a fast flash for like 10 seconds (just for Christmas 😂😂😂)
hello michele, very good video, can you make a video about the possible improvements via OBD / DTT4ALL for Dacia Sandero Stepway 1.5 dci, thank you very much in advance
Hello thank you again for this tweak, it worked not quite for me. The tail light blinks twice and fade in en out beautiful but the front it cannot fade in or out, it like its bright on and then after couple seconds it fades 50% and then goes off, the same on the welcome scenario.
Hey I was playing around in the developer mode on my radio unit, when I clicked the "High display mode", the display went dark. After that, I used Pyren to solve it and it came back to life but after that, I was having problems with climate buttons. I tried to fix that but now the whole climate is not working and the screen is black again. Is anyone here who could guide me through the process to get it back online? I have ELM cable and a ddt4all program. Car: Megane 4 Grandtour 2017
I like your channel, helped me with Android auto. Also I bought an initiale leather interior set and your tutorial showed me how to change the boot animation of the rlink to the sequence with the initiale logo on it. Great stuff. The initiale passenger seat has massage as well, in my original set I only had a massage seat on the driver's side. Do you think I can switch on the massage in the Rlink system with ddt4all as well?
Hmmmm.. good question! I have to check, because Megane does not come with passenger massage option, so I don’t know if there’s physically an option to activate!
@@MicheleP that would be great, my Renault dealer is very helpful but as soon as I mention messing with ddt4all my warranty is probably out the door. I have a Scenic IV by the way
@@ferrybel2472 yep, once you touch the car (even changing a light bulb) your warranty is gone! in these days i'll check if there is some parameter to change and i'll let u know!
Hey, i've just discovered DDT4ALL and it looks awesome. I really want to see what kind of customisation features are availabe for my Megane III which is 1 generation older than yours. You show that you select the car from the list, but somewhere else I read that it's better to let DDT4ALL scan all the available ECU's instead then you get confirmed which ECU's are there. What do you think? Also, do you know where I will find settings to enable and disable electric power folding mirrors and headlights washers?
Questo e vero! Ma sai c'è anche chi l'inglese non lo sa bene come tanti e pur di seguire tutorial per poter personalizzare qualcosa sulla propria vettura può fare seri danni!
Hello, please i donn't speak english very well. You could make a video in Italian. To make the fog lights turn on when turning the steering wheel and not only of the megane 4. From the accent, I feel that it has Italian origins. Thanks 1000
@@MicheleP gentilissimo. ne approfitto per chiederti una cosa, ho fatto tutte le modifiche necessarie per android auto, tutto ok , mi ha funzionato per 3 mesi, poi da ieri, quando collego il telefono tramite usb, non mi viene più riconosciuto, quindi niente telefono, niente android. ho provato per 2 volte un hard reset, cambiato 2 cavi, originali samsung, ho provato con un altro cellulare ( samsung a5 con root, samsung a7 no root), ma niente. il telefono viene riconosciuto solo con il bluetotooth, tramite usb niente ( ovviamente quando collego il cavo, spengo il bluetooth). hai idea di cosa potrebbe essere. Grazie, e comunque ho già fatto praticamente tutte le modifiche che hai postato, tutorial veramente fatti bene, bravissimo
grazie stefano! onestamente non so per quale motivo ora non funzioni più; hai provato a rientrare dentro con DDT4ALL e vedere se le modifiche si sono mantenute? magari l'auto ha fatto un aggiornamento software e i valori si sono sovrascritti
@@MicheleP si, ho provato, era tutto ok. ho anche "disautorizzato" salvato, resettato, poi riautorizzato, salvato e resettato. niente . nel menù RLink mi appare il mirror dello smartphone, quindi direi che AA è attivato. secondo me è successo qualcosa all'impostazioni delle porte, perchè quando collego lo smartphone, mi dice MPT collegato, parte la musica che ho nel telefono, ma il telefono non viene riconosciuto, e come ho detto , ne ho provati 2, cambiando 3 cavi. tu sai che esistano configurazioni da fare nelle porte usb che posono essere cambiate? di aggiornamenti non ne ho fatti, perchè ho fatto l'aggiornamento dal 2.2 al 3.3 con guide trovate sul forum della megane, aggiornamento fatto proprio per avere AA, e quindi non avendo più un software originale, non posso più fare aggiornamenti. Cmq grazie per la risposta, se ti viene in mente qualcosa , fammelo sapere, nel caso risolvo, ti faccio sapere io
⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠
Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ
CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: ruclips.net/p/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj
Great video. I have worked on the Lights software part for Renault.
You have explained way better than Renault persons.
Hello man, i have a question if you mind, i have front headlights from renault zoe and both megane and zoe uses same headlight ecu, so i’m gonna install led lens, blinker and drl to my motorcycle from the zoe’s headlights but i couldn’t manage to activate drl led’s, i can get to work low beams, high beams and blinkers but i couldn’t activate drl, do you know the solution?
Super. Soon also going to do it !!Already done 5 other items from the tutorials. Michele does a great job of explaining it to us well.
yoooo!! keep going mate!!
Michele
Today I adjusted the hello and goodbye lighting and it works great. I'd love to see even more of your great tutorials.
Thanks
hello sir every time i connect i get it all in red no data not like your do you know may be way?
Hi mate you are really doing great jobs. There is a setting for DRL always with full power (always bright) they not fade to low when you open headlights.
Do you known this setting?
Hi Michele , how do I increase the intensity of the side LED lights to make them shine brighter?
Great as usually!
I made it on Espace a month ago, now it's time to change it on Kadjar
Fire in the hole!!
@@MicheleP
By the way, do you have LDW and automatic parking assist?
nope. just the adaptive cruise control
@@MicheleP I would ask u about lane keeping assist activation but.. Not today :)
Have a nice evening!
👍liked it ! This gives me some ideas....i always thought the interiour lights stay on too long after i close the door.....
I agree. Do you know where I can find the option to modify it?
@@K_Sadek Not quite, but i bet that you can find that using DDT.....i havent done that yet to the Meg but maybe in the future...
@@hirayaman246 please share with me if you manage to find it 🙂
@@K_Sadek Sure thing, i'll write it to you....just these days im too lazy to try to find it - maybe theres someone who already has done it....
Hi thnx video. i have a question. Can we use these rear DRL as signal lights?
Hey Michele, thank you very much for some very interesting videos.
I have only recently found your page and have tried some mods, which are great.
My question is this.
I see various red boxes with "No data" in them, can you explain what this means?
Thanks in advance.
Boa noite tens onde posso tirar o dd4all ? e como ligas a obd
Grande Michele!!! Grazie per îl tutorial!!! Ottimo lavoro!!! Complimenti!!
Ti volevo chiedere, per la Clio del 2017, Clio 4, o 5, non lo so,🤔. Come si fa, che non trovò la voce sailing, nel menu upc-emm?? Nella talisman ci sono riuscito!!!
Saluti e buone feste!!!
Ciao! allora per quello che riguarda la clio del 2017, è la clio IV.. io ho trovato questo.. PERO' NON SO SE E' LA COSA CORRETTA!! SALVATI SEMPRE I VALORI ORIGINALI!!!!! allora vai su clio IV (X98) -> UPC-EMM -> EMM_EDISON_DDT2000_SW15_2_V1.0 -> EMM_LIGHTING -> EMM_LIGHTING_CONFIGURATION e qui dovresti avere i welcome e goodbye da modificare come per la megane
Grazie mille! Gentilissimo! Non appena potrò, ci provo!!! E possibile accendere le luci con welcome e goodbye, nella talisman? Grazie!🙋♂️💪👍🥂
Si, quello però lo fai dal menu di r-link.. adesso non mi ricordo come
Si chiami di preciso, ma è nelle impostazioni utente
Michele Predieri
Grazie per la risposta! Sarebbe probabilmente luci di benvenuto?? Se fosse così, da me sono impostate su on, però le anabbaglianti non si accendono... saluti🙋♂️
@@felicflorian9353 guarda, oggi la macchina non l'ho usata.. domattina ci guardo e ti do conferma.. ok?
Hi can I do the light setting in car with developer mode,
Hi. I am looking for solution and maybe You can help me. I have megane iv and I would like to change moment of opening side mirrors when option welcome lights is on. Welcome lights connected with hand free cause the side mirrors to open every time I approach the car and close if I walk away. If the greeting lights option is disabled, the mirrors open only after the ignition is turned on (pressing the start/stop button). I would like to keep the backlight only options, but change the moment of opening the mirrors to the moment of turning on the ignition. Do you know where to set this in dd4all?
@MicheleP How to make the rear and front LEDs turn on at full power during the day?
Thank you for explaining everything so clearly. BUT, I jave a Megane 4, phase 2, and the ECU's are called differently. How do I know which one to change?
Hi, you really do a great job of explaining it to us, thank you very much, i juste want to ask how to activate it ^^
Thank You for the video. Can I use some of your tips and tricks on my new Captur? Saluti di Croazia 😀
Is it possible to activate automatic hazard lights when car is in reverse gear on megane mk4 ? Does ddt4all have this function
Hey Michele. Is there any way to light up the flashers like u.s. style?
Hi Chris. Unfortunately not, because Renault does not sell cars in the US, so this instruction is not even present in the ECUs
Thanks for the info Michele.
Keep going making those great videos! Nice work! 👍
Hello. In my Megane 4, the door mirror lighting does not work with the welcome lighting. do you know how to enable it in dd4all?
Where can I buy the program and cable?
hi MicheleP, i changed the dashboard of my Megane 4 with that of the Kadjar, now i have a fuel autonomy problem which is not correct, i have the DDt4all and Elm 327 software in my possession. please help
Thanks for your previous help. I've enjoyed making some modifications. Do you know if it is possible to turn off the beeps when the alarm arms/disarms? .
Thanks, Pete
Hi Michele. I have some questions.
"REMEMBER TO WRITE DOWN ORIGINAL VALUES BEFORE DOING THE MOD!! AND REMEMBER TO LOCK THE CAR FOR AT LEAST 10 MINUTES TO LET THE ECU's TO SHUT OFF!!"
Why should we lock the car for 10 minuters? We can't remove de adapter before that?
"Procedure is very very easy, just remember to do the Reset SW of the R-Link2 otherwise this mod won’t work!"
Actually I changed the LED sequence for "goodbye" to the front LEDs without reseting R-Link2 and when I lock my car, I can see the new sequence.
Another question.
Can we make this changes with engine off? I changes de front LED sequence with engine on, but I would like to know if we can do it with engine off to not have the engine on all the time while testing different sequences.
Thank you in advance.
Hi i have a renault 4 diesel grandtour bose edition how to activate massage seat for the driver thanks
Hello! Is there any chance to fully activate Multisense for cars without electric parking brake and no multisense button?
I was able to make the multisense menu to be accesed through the R-Link, and seems that pressing the ECO button triggers and enters the multisense menu.
But the other modes (sport / netrual / comfort) are doing absolutely nothing. I would appreciate to have a stiffer steering wheel or better gearbox response.
Thank you very much! :D
hello to you. I have a problem with the side mirrors (Renault Talisman ) The lower lights do not illuminate after the display has been replaced. Welcome / goodbye is enabled in dtt4all in bcm / mmi. is it a coincidence or a fault? The other mirror functions are working. Any ideas ?
The Best....
Per renault arkana???
I need help with folding unfolding mirrors locking and unlocking, how can I do it?
Ciao Michele, ho scoperto ieri sera per caso i tuoi tutorial, ti faccio i complimenti perché molto utili per chi come me, vuole smanettare nella propria auto con piccole modifiche.....questa storia di personalizzare i lampeggi delle luci all'apertura e chiusura dell'auto mi intriga parecchio😁, ho capito che i valori delle varie voci sono 0 spento e 100 acceso, non mi sono chiare però tutte le voci, da 1 a 63🤔 perché così tante?
Grazie e complimenti ancora!!!!
can you delete the rear drl light ?
Is it possible to activate the tempopilot with DDT4all for Megane 2
Hey michele! Help please! What to do if ddt4 shows no data for all values, but my its connected properly to my car?
Try to put an higher timeout in the connection options
Hello Michele, from the netherlands.
I own a Scenic 2014 with R-Link 2
and i read Version 1.2.20130314.1
Can i update to a version so i can use the DDT4ALL also ?
I like what you are doing, and your English is good and informative
So go on and make more tutorials.
Michele, thanks a lot!
I have the same car here in Ukraine, and do all the tips you discovered in your videos, except CarPlay (I have 2.17.2.803 R-link version, do you know how to upgrade it or tell me please some other ways to get CarPlay into my car?), its very cool!!!
So wish you all the best, looking forward to new videos))
Unfortunately CarPlay is not available with version 2. Even if you change version to 7 or 8 and change USB ports. The main reason is that 2.2 does not have specific hardware in the main board
You can get 3. Something through an USB key, with a special script. Then you can activate Android Auto and carplay through another USB script that allows you to enter developer mode on the R-link, then you just pin the carplay in the developer menu 😁 IT Works for me with Android Auto. But i did it along time ago, so i dont remember the links. Try seach for "R-link developer mode carplay" something like that 😁
@@TheChrisMiR thanks for the advice) anyway I’ll try to find issue that you mentioned)
Hi Michele , please I lost my rear camera after I changed something in my Talisman.any help please
Can you tell me please how to change display mode on ddt4all for my Kadjar
I have pressed on HIGH by mistake in developer mode!
The screen does black
Any idea how to have the us City lights on? As in have the indicator lights on at all times?
Hi ! I like your videos. What kind of OBD Plug do you use ? I want buy one for my Scenic 4. I can't wait to mod.
hi! buy this one! amzn.to/2t3WSvs
boas Michele e muitos parabéns pelos vídeos que postas ajuda me muito, tenho um problema, tenho uma megane 4 de 2017 no R-link 2 deixou de aparecer a imagem da minha megane 4 e aparece a imagem da G Senic como resolver pois comecei a usar o DDT ALL gracas a ti e tenho resolvido algumas mudificacoes espero ajuda e parabéns mais uma vez espero que continuas.
Buongiorno Michele, I have a Clio RS Sport IV 2017 and I want to stop the air conditioning turning on every time I start the car... is this possible... Very good videos, keep up good work
Hi frank! Air conditioning ecu is not controlled via DDT4ALL, but via canclip.. and only dealers can adjust it!
Hallo, how can I active coming home headlight?
Hi Michele,
congratulations on the videos you post. Have you ever had the "E_TM_ScenarioStep" parameter not changed?
The ECU replies: "WRONG RESPONSE: Service not supported in active session (7F2E7F). By default it is 0.08 and I would like to change it to 0.16, but it is not possible.
Thanks for the reply.
So when I access to the lights config menu, on the "read" part it's all empty and on the other part all values are on "no value", any ideas?
Hi there! Thank you very much for your useful tutorials! You are the kind! I have a problem with my R-link 2 on my Kadjar: he needs almost 60 sec till it's awake. Booting it's really slow. Already tried updating but problem still persist. Any suggestions?
Have you ever tried to do an hard reboot? By pressing on off key for at least 5 seconds?
@@MicheleP yes, l tried this also, but without any luck.
When I'm staying the car, l have to wait almost one minute till Rlink active ist, I have no pack sensors and backup kamara in this time. It's really annoying...
What it's weird, if l stop the car only for maximum 5-10 minutes, l don't have this problem anymore.
hi, do you have latest 5.5.0 version?
nope, 5.4.0.. the last one is just for e-tech models, i don't need it
Thanks for the video michele! So if i want a slow burst of the leds 2 times i have to calculate how much each step is? there are 64 steps in total so 32 is the half: 100(full led color)/32 steps= 3. So that means that the first 32 steps have to be increasing with 3, starting from 0 up to 100. This is the first burst. Then the second from steps 32 to 63 is exact the same? I think with this you create 2 slow bursts of the leds? I see in youre video with goodbyescene 63 to 62 that you take a jump from 0 to 10? I hope its clear for you :p
Yes is clear! Actually you’re right with calculation. I take a jump from 0 to 10 because there wasn’t enough space to put the other 3 numbers 👍🏻😂
@@MicheleP so i have to do the same and start from 0 to 10 in the first two steps? Thanks
@@dieterdoom9635 actually yes.. or just play with 0 and 100 (longer or shorter)
Ciao Michele! Complimenti per il canale. Io avrei una richiesta, ho una Megane GT. Quando la metto in modalità sport noto che anche le casse interne simulano il rombo del motore, ma ahimè è troppo basso. Vorrei capire se è possibile con questo software variare il volume dato che dal RLink non riesco. Spero di essermi spiegato bene. Saluti da un Centese!
Cento (Fe)
grande Centese! io purtroppo non ci abito più da qualche mese a cento! comunque, hai provato a cambiare dal multisense il suono che esce dalle casse e mettere in sport? se lo lasci in confort si sente poco poco. io quando lo metto in sport dalle casse esce un bel sound!
@@MicheleP Apperò! Allora ogni tanto mi beccherai sulla Cispadana a stiracchiare un pò la macchina ahah! Si ho provato ed effettivamente il sound esce. Ero solo curisoso di capire se si potesse enfatizzaee quel fantastico suono. Giusto per gasarsi un pò di più ;)
Hello please I like your Tutorials but I just bought a 2021 Renault arkana I want to learn how to make the front light to blink and the back led light to blink,I followed your tutorial but it didn't work for my car.Thanks.
Hello!
I had problems with following this tutorial.
The parameters I changed didnt effect the ligths the way I wanted.
The original parameters weren't written like the ligths were operating, and when I changed them, they didn't change totally like I programed (fade wasn't smooth, and there were some off times although every parameter had a value)
Now I changed all the values to 10 (like it was originally in welcome scenario ) and there is some fade effect...
I don't get this at all
Hey michele! Just wanted you to know that i changed everything starting from 0 then 9 and then everytime steps of 3 until 100 (thats scene 31) then beginnen from 32 again with 0 then 9 and then again steps until 100 (scene 63) i changed the length of the scene to 0.20. It looks good but its not yet the effect of the slow burst to a full burst, maybe because of the leds? If i make the scene longer then 0.20 the effect will be better visable? Thanks man
Hey! Well actually I noticed that the fade is not so smooth (actually it seems that steps aren’t 1-2-3 ecc but more likely 10-20-30 ecc). So yes, probably with 0.20 seconds they will behave better! I’m wondering to program the leds to perform with a fast flash for like 10 seconds (just for Christmas 😂😂😂)
security gateway we don’t need?
hello michele, very good video, can you make a video about the possible improvements via OBD / DTT4ALL for Dacia Sandero Stepway 1.5 dci, thank you very much in advance
Unfortunately I don’t have a Dacia, so I can’t try to my own ☹️
I have dont wrong manipulation that made my rlink2 screen black, and all sensors are disabled. How to do please
Hello thank you again for this tweak, it worked not quite for me. The tail light blinks twice and fade in en out beautiful but the front it cannot fade in or out, it like its bright on and then after couple seconds it fades 50% and then goes off, the same on the welcome scenario.
Well.. try to re write values, mine had the same problem the first time I tried!
@@MicheleP Ok so with the same values you mean or another value?
same same
@@MicheleP I tried that 2 times today but the front led just cant fade in or fade out.
Hi. Did you figured it out? My megane si doing just the same. Its Like 100% then 50 then 0. No fading
I like it.
hello, it is possible to change the maximum speed in ddt4all. 🇵🇹
No.. only via ecu reprog
Can you make a video to activation turn signal ( like US light )
Not possible
Michele Predieri what wrong i do like u but it say wrong response and bad elm response
Hey
I was playing around in the developer mode on my radio unit, when I clicked the "High display mode", the display went dark.
After that, I used Pyren to solve it and it came back to life but after that, I was having problems with climate buttons.
I tried to fix that but now the whole climate is not working and the screen is black again.
Is anyone here who could guide me through the process to get it back online?
I have ELM cable and a ddt4all program.
Car:
Megane 4 Grandtour 2017
sympa like
I like your channel, helped me with Android auto. Also I bought an initiale leather interior set and your tutorial showed me how to change the boot animation of the rlink to the sequence with the initiale logo on it. Great stuff. The initiale passenger seat has massage as well, in my original set I only had a massage seat on the driver's side. Do you think I can switch on the massage in the Rlink system with ddt4all as well?
Hmmmm.. good question! I have to check, because Megane does not come with passenger massage option, so I don’t know if there’s physically an option to activate!
@@MicheleP that would be great, my Renault dealer is very helpful but as soon as I mention messing with ddt4all my warranty is probably out the door. I have a Scenic IV by the way
@@ferrybel2472 yep, once you touch the car (even changing a light bulb) your warranty is gone! in these days i'll check if there is some parameter to change and i'll let u know!
Hey, i've just discovered DDT4ALL and it looks awesome. I really want to see what kind of customisation features are availabe for my Megane III which is 1 generation older than yours. You show that you select the car from the list, but somewhere else I read that it's better to let DDT4ALL scan all the available ECU's instead then you get confirmed which ECU's are there. What do you think? Also, do you know where I will find settings to enable and disable electric power folding mirrors and headlights washers?
Michele non ho capito come fai a cambiare i valori
cancelli il valore e scrivi quello che vuoi tu (da 0 a 100, 0 spento 100 acceso al max)
io ho una talisman ed e vero che l'inglese e alla portata di tutti e non ho problemi a capire ma perché non fare anche qualche tutorial in italiano?
Perché sarebbero fruibili solamente dagli italiani...
Questo e vero! Ma sai c'è anche chi l'inglese non lo sa bene come tanti e pur di seguire tutorial per poter personalizzare qualcosa sulla propria vettura può fare seri danni!
Questo e un mio punto di vista!
sto facendo un video in italiano che racchiude tutti i tutorial che ho fatto sul canale, dammi un paio di giorni e sarà online!
@@MicheleP bene dai mi fa piacere!
Someone have the originals sequences?
Hello, please i donn't speak english very well. You could make a video in Italian. To make the fog lights turn on when turning the steering wheel and not only of the megane 4. From the accent, I feel that it has Italian origins. Thanks 1000
In settimana faccio un video con tutte le modifica fattibili con DDT4ALL in italiano
@@MicheleP ok grazie mille e tanti auguri di buon anno
Ok so tutorials are good but please drop the background music, there is no need 😏
Extreme loud and unnecessary music...why????
ma , per ignoranti come me, dei tutorial in italiano non puoi farne (-:
In settimana pubblico un tutorial in italiano con tutte le modifiche
@@MicheleP gentilissimo. ne approfitto per chiederti una cosa, ho fatto tutte le modifiche necessarie per android auto, tutto ok , mi ha funzionato per 3 mesi, poi da ieri, quando collego il telefono tramite usb, non mi viene più riconosciuto, quindi niente telefono, niente android. ho provato per 2 volte un hard reset, cambiato 2 cavi, originali samsung, ho provato con un altro cellulare ( samsung a5 con root, samsung a7 no root), ma niente. il telefono viene riconosciuto solo con il bluetotooth, tramite usb niente ( ovviamente quando collego il cavo, spengo il bluetooth). hai idea di cosa potrebbe essere.
Grazie, e comunque ho già fatto praticamente tutte le modifiche che hai postato, tutorial veramente fatti bene, bravissimo
grazie stefano! onestamente non so per quale motivo ora non funzioni più; hai provato a rientrare dentro con DDT4ALL e vedere se le modifiche si sono mantenute? magari l'auto ha fatto un aggiornamento software e i valori si sono sovrascritti
@@MicheleP si, ho provato, era tutto ok. ho anche "disautorizzato" salvato, resettato, poi riautorizzato, salvato e resettato. niente . nel menù RLink mi appare il mirror dello smartphone, quindi direi che AA è attivato. secondo me è successo qualcosa all'impostazioni delle porte, perchè quando collego lo smartphone, mi dice MPT collegato, parte la musica che ho nel telefono, ma il telefono non viene riconosciuto, e come ho detto , ne ho provati 2, cambiando 3 cavi. tu sai che esistano configurazioni da fare nelle porte usb che posono essere cambiate? di aggiornamenti non ne ho fatti, perchè ho fatto l'aggiornamento dal 2.2 al 3.3 con guide trovate sul forum della megane, aggiornamento fatto proprio per avere AA, e quindi non avendo più un software originale, non posso più fare aggiornamenti.
Cmq grazie per la risposta, se ti viene in mente qualcosa , fammelo sapere, nel caso risolvo, ti faccio sapere io