I had to request replacement for my original m600 23G after firmware update both the mouse and dongle bricked to the point the apps from Kysona are stuck "device sleep" (including the unbrick apps). I was sent a 23I as a replacement, the barcode sticker says "new" in the description. Differences; 23G dpi button rattles, center of main mouse buttons is thicker / taller at the body, main button 1 tends to stick because of it, if you click at the very edge. The center skate is slightly taller which allows spinning mouse on pad. The wireless cover is matte instead of glossy. New model seems tighter, less wobble and pre-travel on the buttons.
sup bro, I'm so sorry to hear about your mice. I'm getting this one and this is the first time I've bought a wireless mouse tbh. Is there anything you suggest when starting out with it to avoid any inconvenience from occuring or getting my mouse stopped? I wouldn't be able to replace it unfortunately if there is any issue with it (international) and there will be a lot of hustle.
@@ahmedsedawy2999 Don't get me wrong, even tho i had an issue with my original mouse, I really enjoyed it. That said, if you get the 23G model, use it as is until you notice any issue. If you have to use the update, read all the instructions until they are clear before attempting. But again in your situation, use it as is. GL
@@clockcycle Thank you so much, So basically it's not a big deal and all I have to do is to avoid this update right? Could you please tell me how to avoid it and generally the best practices to set up the mouse once I get it? I'm sincerely apologizing for any disturbance caused by me but I'm really afraid, it will be really hard to get a replacement for this mouse or send it back from my country unfortunately.
@@ahmedsedawy2999 to update you have to download the update(s) and run them separately, individually. Just don't and you're good to go. If you get the new model 23I, there's nothing to update.
dude, this comes with glass skates and grip as extras. W and under $40. Wth is going on. The mouse is well built and feels solid. Glass skates super duper smooth for about 30 minutes then super friction. Shouldn't have thrown out the factory skates, they were really smooth too.
I also experienced a similar situation when I bought x3, and then I returned it. Afterward, I switched to the Kysona M600, and it feels really great. I haven't encountered a similar issue with it.
@@XUMax-gp3kb Hey bro im debating on whether to get the kysona m600 or attack shark x3, they are basically the same price for me, roughly (£30). Which one should i choose?
I think think shape looks superior to the attack shark x3. It looks more like a pulsar x2 mini which is nice. The note about acceleration is so interesting. Usually its frowned upon
@@valevale3296 They are very close I think. M600 has a nice set of accessories and more premium box. X3 weighs less officially but it seems that everyones irl unit weighs 54g, not 49. Shape wise I like kysona more as its closer to an x2v2 but theyre so similar its almost splitting hairs. At same price I would go kysona m600, if cheaper Id choose X3.
@@jonhsmith3745 Not entirely correct. X3 has Kailh GM 8.0 revision 90m teal switches, despite what it says in the description for the mouse. They feel a lot like BSPDs.
Make sure you check the description for the links to my socials so you can get extra entries to the giveaway!
a question, software says there is a DPI button (6th) button, is that just a mistake in the software or is my mouse faulty ?
I tried to Download the Software but Windows Said Its a Virus and i dont wann install viruses is it Safe the Software ?
All steps done , Thankyou so much for this amazing giveaway. Sending love and support from philippines 💖💫🇵🇭 Manifesting and Praying to win 🙏✨😇
Johnson Kenneth Harris David Moore Brian
Do you have to enable the mouse acceleration in the app?
I had to request replacement for my original m600 23G after firmware update both the mouse and dongle bricked to the point the apps from Kysona are stuck "device sleep" (including the unbrick apps). I was sent a 23I as a replacement, the barcode sticker says "new" in the description. Differences; 23G dpi button rattles, center of main mouse buttons is thicker / taller at the body, main button 1 tends to stick because of it, if you click at the very edge. The center skate is slightly taller which allows spinning mouse on pad. The wireless cover is matte instead of glossy. New model seems tighter, less wobble and pre-travel on the buttons.
sup bro, I'm so sorry to hear about your mice. I'm getting this one and this is the first time I've bought a wireless mouse tbh. Is there anything you suggest when starting out with it to avoid any inconvenience from occuring or getting my mouse stopped? I wouldn't be able to replace it unfortunately if there is any issue with it (international) and there will be a lot of hustle.
@@ahmedsedawy2999 Don't get me wrong, even tho i had an issue with my original mouse, I really enjoyed it. That said, if you get the 23G model, use it as is until you notice any issue. If you have to use the update, read all the instructions until they are clear before attempting. But again in your situation, use it as is. GL
@@clockcycle Thank you so much, So basically it's not a big deal and all I have to do is to avoid this update right? Could you please tell me how to avoid it and generally the best practices to set up the mouse once I get it?
I'm sincerely apologizing for any disturbance caused by me but I'm really afraid, it will be really hard to get a replacement for this mouse or send it back from my country unfortunately.
@@ahmedsedawy2999 to update you have to download the update(s) and run them separately, individually. Just don't and you're good to go. If you get the new model 23I, there's nothing to update.
Great, keep on uploading lit contents. Looking forward for.more in the future. Sending love and support 💚
Done completed everything
Thank you for the chance 🤟
Yes done entered the giveaway. Thank you for the opportunity 🙏
Anyone with this mouse notice LMB miss clicks?
great video! i was looking for reviews of Kysona m600
dude, this comes with glass skates and grip as extras. W and under $40. Wth is going on. The mouse is well built and feels solid. Glass skates super duper smooth for about 30 minutes then super friction. Shouldn't have thrown out the factory skates, they were really smooth too.
Completed all the steps along w the all extra entry ways❤😊
thanks for giveaway, appreciate it
Keep Up The great work bro, amazing video ❤
hope to be lucky one
Can anyone tell me how this mouse would be for comp fortnite
Incredible work sir, keep it up.
very nice
keep up the good work
this is best link for cheapest price
kysona m600 vs attack shark x3 which is better plsss
Theyre the same mouse but different brand, though the kysona m600 has a better battery ehich is 2 grams heavier, so just get the cheaper one
remove the center slider
Does it bug out when u press capslock, like the attack shark x3 does?
I also experienced a similar situation when I bought x3, and then I returned it. Afterward, I switched to the Kysona M600, and it feels really great. I haven't encountered a similar issue with it.
@@XUMax-gp3kb Hey bro im debating on whether to get the kysona m600 or attack shark x3, they are basically the same price for me, roughly (£30). Which one should i choose?
I think think shape looks superior to the attack shark x3. It looks more like a pulsar x2 mini which is nice.
The note about acceleration is so interesting. Usually its frowned upon
between attack shark and kysona, which one do you think is better? besides the price
@@valevale3296 They are very close I think. M600 has a nice set of accessories and more premium box.
X3 weighs less officially but it seems that everyones irl unit weighs 54g, not 49. Shape wise I like kysona more as its closer to an x2v2 but theyre so similar its almost splitting hairs. At same price I would go kysona m600, if cheaper Id choose X3.
@@r4nowoThey are the exact same mouse. There is no difference between the X3 and M600
Pretty sure the kysona has huano pink switches, better than the blacks that come on the attack shark correct my if im wrong
@@jonhsmith3745 Not entirely correct. X3 has Kailh GM 8.0 revision 90m teal switches, despite what it says in the description for the mouse. They feel a lot like BSPDs.
That was indeed a nice mouse 😲 Done entering on the giveaway. Followed you on Instagram, Twitter and TikTok 🙌❤️ Thankyou for the opportunity ❤️