I really love your Channel I'm originally from Toledo suburbs and I must say that's all I ever had was a brand-new Sportster I bought it back in 82 when I was stationed at Killeen Texas I learn an awful lot from that Sportster and I surely would seriously thinking about building another one with a hardtail frame and a solo seat I just subscribed to your Channel I want to go back through and check out what you guys have built already and you guys are really inspiring me right now I'm sitting in Gainesville burn unit with a big hole in my leg hopefully be home by the end of January on the road to recovery I'm sure by that time you guys are have me just going crazy in my mind what I want to do and what I want to put together but I really like the way you guys work very knowledgeable you guys have a lot of fun and thank you for the inspiration
The way you guy were clowning on shop names is hilarious.. I think everyone goes through that second guessing wishing you used “mad dog three phase lathe machine” as a cool guy chop shop name
I REALLY wish I could have made it to Fuel Cleveland (my old home town). I wanted to meet you guys! Thanks for the show highlights and comments! That Sporty chop is prime! Thanks for featuring it! It just needs a front brake (seriously). I dig that riser/bar combo. The fit and finish are boss! Christmas came really early for you guys (thanks Greg!). Build right. Ride safe. All the best this upcoming holiday. Feel better soon. Prayers -- W
Just subscribed a few days ago, and I've already watched all the older videos. Awesome channel guys, keep up the good work! It seems like you guys love what you do, so it's easy to have fun and not consider it "work." I'm actually watching this at work right now. lol. Thanks for keeping me entertained, keep the videos comin!
I have a few chopped ironheads. Building another now rather slow though . 3 years and my roller is almost but not quite done. Its hardtailed already I did that first. Then I came across a denvers front end. Rigid forks! 10 inches over stock. Sooooo now its got 55 degrees of rake to work with that. 21 inch front wheel with no front brake. I have a mustang gas tank. Oil tank that is maybe yes maybe no. Bad ass ol skool king queen seat that sat at my uncles house for 20 dam years but he gave it to me finally. My left leg is prosthetic so the plan is to run a disk brake on the back and put the control on the handlebar. I have a 1973 motor and thats important since its right side shift. I cant work a gear shift with my artificial limb. so 1973 works for me. Right side shift. Brake lever for rear brake on handlebar and Im good to go. I have a bobbed late 84 sporty and for that one I fabbed a heel toe shift . I can push down to shift no problem. It works but my plan is to switch it to a hand shift and put the clutch lever on the shifter. Rode it yesterday because my oh so modern reliable twin cam WOULDNT START. When I got home my cool repro ford rear light didnt work and my glass lense was broken. Hmmmmmmm. Replace that bitch! Turns out my Dyna just needed a battery . Battery had been in it since 2018! OOPS DUHHHH. Its been slow to start at times and I was thinking compensator as TC motors are infamous for those going out. I already have a gear drive in it. I like my Dyna however its got no soul and it dont sound like a Harley LMFAO. But aint no shovel or pan or whatever ol skool gonna keep up with it. Its my daily rider. Im 58 years old and injuries in addition to my leg make me not wanting to turn wrenches all the time. I have a couple pans. A bad ass 71 Honda CB 750 chopper . A triumph thats chopped and will run great most of the time . Hey I made a 1981 Yamaha Virago into a chopper. That one always gets looks because most people dont know what the motor is. Oh I am slowly very slowly working on a 86 FXRT I picked up ;last year. I wanna make it a copy of Mickey Rourkes Harley Davidson and the Marlboro man bike. Its got a long way to go. I got from a meth head so FIRST i gotta undo all tweaker bullshit. Electrics are a mess on it. Burns oil and smokes like a diesel motor. Oh they had a vice grip attached to the shift shift because the splines are worn out . Yea great way to fix it to shift Gears. A year later I have replaced the clutch. shift shaft. added a heel toe shift. Replaced the primary chain tensioner. Both belt drive pullys and the rear wheel. Rear brake caliper. the more I do the more shit I find wrong. It lives in my lift!!!! But its an FXR . Had to have it.
I lived it, all of it, and I have the battle scars to prove it. Where is your shop? Recently subscribed. Not sure why the Sportster gets a bad rap, they're good bikes. I see an early cam cover on that Knucklehead. Good luck finding a number side for your '36 Knuckle cases, it won't be cheap, and I might be able to help you guys out.
2 things: 1) You dudes are going up 500 subscribers a week! Holy Smokes! 2) That bike is BITCHIN. (Thank you God for the cool electric start)! OK, 3rd thing. Fiona is still the star of the channel.
How did you guys link up with Ghost and Patch!?! Ghost is the only other dude I see up as early as me in Detroit joggin while I'm on my coffee ride. Small ass fuckin world man. Cheers sons, yer videos are hilarious.
Hey guys I recently picked up this 2003 anniversary 1200 edition, it's stock as a monkey with brass balls except for the flat ass seat and the beamer lights some someone thought would be cute. Should I ride it as is or should a put on a clown suit when I do. By the way, I don't have brass balls. Do you have any suggestions, should I chop it rake it, or keep it !
@@TheEazyCo Your right beauty is in the eye of the beholder and and it's what you make of it Right ! It's a piece of art to those who can appreciate it for what it is although can be referred by some as piece of shit ! Who freekin cares, the less you give a fuck about anything the happier you'll be Right ! Have a blessed day
Liked and subscribed Dam, how can I purchase a chopper created by you guys. Liked and subscribed Eazy: Money, custom build ,ship, happy life. I have patience? Is this possible ? Best channel, you guys make me smile every video, thanks
One question for Eazy choppers machine working mill lathe welding tig fabrication chop source cult customs. How are you goin to put this on a business cards ? like always a great video.
You guys are hilarious ! Your videos very often brighten up the shitty days I sometimes have ! Save the choppers ! Best regards from Covid dictatorship country germany
DUDE THAT CHOPPER SICK!! That's an ULTIMATE BADA⚡️⚡️ BARHOPPER! Always love the sportster American Iron. What would cost to make one for a customer. I really reallly reallly like really pumps my 🍒 THANKS for the cool candy!⚡️⚡️🍻🖕🏻
ruclips.net/video/SIPTDm1YZMQ/видео.html --- For The Eazy Co and everyone else out there who aren't afraid to do a hard day's work and get their hands dirty. For all of the "motorcycle agents" out there. You know who you are.
@@TheEazyCo - Thanks! It's from 1966 -- THE year for Garage, the first year for Shovelheads and my favorite year for sound. Build right. Ride safe. -- W
Dude where is the T-shirt with Fiona on it that would be a killer merchandise shirt hook it up homie put the link in below I would love to buy one got it in white
Need to apologize i watch so many videos I confused you with mazi moto still wanna bring my bike from mo to ur shop 75 fxe good engin n trans rolling soft cooter mad scooter type from hidden in a ol dry barn no shit can I win a build from a good ol boy from mo you are my first subscribed just the crazy il bring mango dried from global import from the Philippines 🇵🇭 my wife's home land please let my bike take up room in your shop 4 a couple days n get the makeover
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
Sending Love, Thoughts, and Prayers.......LoL!
Peace be with you
Hahaha your crazy… I love that sportster chopper at the end of video… man it’s awesome…
I really love your Channel I'm originally from Toledo suburbs and I must say that's all I ever had was a brand-new Sportster I bought it back in 82 when I was stationed at Killeen Texas I learn an awful lot from that Sportster and I surely would seriously thinking about building another one with a hardtail frame and a solo seat I just subscribed to your Channel I want to go back through and check out what you guys have built already and you guys are really inspiring me right now I'm sitting in Gainesville burn unit with a big hole in my leg hopefully be home by the end of January on the road to recovery I'm sure by that time you guys are have me just going crazy in my mind what I want to do and what I want to put together but I really like the way you guys work very knowledgeable you guys have a lot of fun and thank you for the inspiration
The way you guy were clowning on shop names is hilarious.. I think everyone goes through that second guessing wishing you used “mad dog three phase lathe machine” as a cool guy chop shop name
We fucked up
Gotta say, your guys' videos always brighten my day. Shout out from Germany 🤘🏻
3:16 ahaha too funny. gotta make a loop of that.
I REALLY wish I could have made it to Fuel Cleveland (my old home town). I wanted to meet you guys! Thanks for the show highlights and comments! That Sporty chop is prime! Thanks for featuring it! It just needs a front brake (seriously). I dig that riser/bar combo. The fit and finish are boss! Christmas came really early for you guys (thanks Greg!). Build right. Ride safe. All the best this upcoming holiday. Feel better soon. Prayers -- W
Divorced sporty looks like a big twin. Sick!
Great video guys. Good luck with getting new pants. Thoughts and prayers
Man in the box!
Pineapple dong🤣🤣 didn't mean to put that in there 🤣
Top tier banter, and sick bikes. Glad i found this channel.
Best 17 minutes spent this week 😆
Try oxford market basket always well stocked. Nice chopper.
Just subscribed a few days ago, and I've already watched all the older videos. Awesome channel guys, keep up the good work! It seems like you guys love what you do, so it's easy to have fun and not consider it "work."
I'm actually watching this at work right now. lol. Thanks for keeping me entertained, keep the videos comin!
thanks for watching! welcome to the shit show
I truly enjoyed the pants shopping.
I have a few chopped ironheads. Building another now rather slow though . 3 years and my roller is almost but not quite done. Its hardtailed already I did that first. Then I came across a denvers front end. Rigid forks! 10 inches over stock. Sooooo now its got 55 degrees of rake to work with that. 21 inch front wheel with no front brake. I have a mustang gas tank. Oil tank that is maybe yes maybe no. Bad ass ol skool king queen seat that sat at my uncles house for 20 dam years but he gave it to me finally. My left leg is prosthetic so the plan is to run a disk brake on the back and put the control on the handlebar. I have a 1973 motor and thats important since its right side shift. I cant work a gear shift with my artificial limb. so 1973 works for me. Right side shift. Brake lever for rear brake on handlebar and Im good to go. I have a bobbed late 84 sporty and for that one I fabbed a heel toe shift . I can push down to shift no problem. It works but my plan is to switch it to a hand shift and put the clutch lever on the shifter. Rode it yesterday because my oh so modern reliable twin cam WOULDNT START. When I got home my cool repro ford rear light didnt work and my glass lense was broken. Hmmmmmmm. Replace that bitch! Turns out my Dyna just needed a battery . Battery had been in it since 2018! OOPS DUHHHH. Its been slow to start at times and I was thinking compensator as TC motors are infamous for those going out. I already have a gear drive in it. I like my Dyna however its got no soul and it dont sound like a Harley LMFAO. But aint no shovel or pan or whatever ol skool gonna keep up with it. Its my daily rider. Im 58 years old and injuries in addition to my leg make me not wanting to turn wrenches all the time. I have a couple pans. A bad ass 71 Honda CB 750 chopper . A triumph thats chopped and will run great most of the time . Hey I made a 1981 Yamaha Virago into a chopper. That one always gets looks because most people dont know what the motor is. Oh I am slowly very slowly working on a 86 FXRT I picked up ;last year. I wanna make it a copy of Mickey Rourkes Harley Davidson and the Marlboro man bike. Its got a long way to go. I got from a meth head so FIRST i gotta undo all tweaker bullshit. Electrics are a mess on it. Burns oil and smokes like a diesel motor. Oh they had a vice grip attached to the shift shift because the splines are worn out . Yea great way to fix it to shift Gears. A year later I have replaced the clutch. shift shaft. added a heel toe shift. Replaced the primary chain tensioner. Both belt drive pullys and the rear wheel. Rear brake caliper. the more I do the more shit I find wrong. It lives in my lift!!!! But its an FXR . Had to have it.
we feel your pain!
“Lathe-e-boys” was right there!!!!
I liked and that other thing some time ago. What is the rake and stretch of that sporty . Clean bike looks good
what were the specs of the frame on that chop machine bike? looks good!
Sporty's Rule , Like & Subscribe ! Thx for the laughs !
WELL IT IS ANOTHER SPORTSTER. I COULD HAVE NEVER THOUGHT THAT. thanks boys
whats the up and out on the frame? and how much over on the fork tubes?
Hardtailed soft cooter scooters are from Easy Company
Anything beats the girl pants you had on ! lol
I wanna see these guys build a bike with all the parts people send in haha. Some frankenbike shit 🤘🏻😂
What springer was that on the one you were making the axle for?
I lived it, all of it, and I have the battle scars to prove it. Where is your shop? Recently subscribed. Not sure why the Sportster gets a bad rap, they're good bikes. I see an early cam cover on that Knucklehead. Good luck finding a number side for your '36 Knuckle cases, it won't be cheap, and I might be able to help you guys out.
You guys fuckin rock. Thank you for always keeping shit funny. Tom Fugle would be proud
You rock!
the shop dog is thinking of knucklehead parts
Sweet been waiting. Great content even better bikes 😀
Like and subscribe and have conversations with your friends. 🤙
Market basket for life!
You can use the Weber for the next project, Ford flathead chopper!
Lemme hold that Webber I’m 19 and broke😂
Easy Co is the best builder bar none
Got to get up too get down with the sickness, Sportster sickness UK 👊💨
2 things:
1) You dudes are going up 500 subscribers a week! Holy Smokes!
2) That bike is BITCHIN. (Thank you God for the cool electric start)!
OK, 3rd thing. Fiona is still the star of the channel.
Gotta dig a sportster
WOW!! I started a trend, Greg out did me now someone outdo Greg!! These are good boys!! STONYTOKES
How can a person not 'like and suscribe' to the Antics on this Channel ? You guys are funny AND know yer shit too.
Should I stay away from a bsa lightning 650 chopper project
My cat's breath smells like cat food.
How tall is that frame in the 15 minute mark
Greg wants you to shave the lowers and return them to him fellas.
What about "2 Guys & a Dog chopper shop" LOL
Do you guy actually ever build anything, or just good off all the time ?
oh no
Good morning from Cali!
perfect motorcycle.
What I'm starting to learn is if I make a RUclips channel and act a fool people will send me parts 😂
When is the Virginia show. Maybe I'll cruise down on the old sabre.
What’s the deal with the bike in the background kinda on the end of the line? The one with the girder and the purple tank.
How did you guys link up with Ghost and Patch!?! Ghost is the only other dude I see up as early as me in Detroit joggin while I'm on my coffee ride. Small ass fuckin world man. Cheers sons, yer videos are hilarious.
Hey guys I recently picked up this 2003 anniversary 1200 edition, it's stock as a monkey with brass balls except for the flat ass seat and the beamer lights some someone thought would be cute. Should I ride it as is or should a put on a clown suit when I do. By the way, I don't have brass balls. Do you have any suggestions, should I chop it rake it, or keep it !
You should do all of the above
@@TheEazyCo Your right beauty is in the eye of the beholder and and it's what you make of it Right ! It's a piece of art to those who can appreciate it for what it is although can be referred by some as piece of shit ! Who freekin cares, the less you give a fuck about anything the happier you'll be Right ! Have a blessed day
Chop/Rake/Apes/Chick stick & keep!
That's gonna cause a fire. 🙂 🙂
Hell yeah brother!
Liked and subscribed
Dam, how can I purchase a chopper created by you guys.
Liked and subscribed
Eazy: Money, custom build ,ship, happy life.
I have patience? Is this possible ?
Best channel, you guys make me smile every video, thanks
why dont people build choppers like these WHERE I LIVE
I WNAT ONE
Let’s build one!
Hell ya guys I always like 👍🏼 and I did subscribe and I freaking lovin it boys!
6:06 lmfao
fuckin love it when i see new vids posted in the AM ....cpl hitties and u wackadoodles .....great day tatter
One question for Eazy choppers machine working mill lathe welding tig fabrication chop source cult customs. How are you goin to put this on a business cards ? like always a great video.
It’s a full page business card
The devils onion ring!!!!
FRICKIN minty
You guys are hilarious ! Your videos very often brighten up the shitty days I sometimes have ! Save the choppers ! Best regards from Covid dictatorship country germany
DUDE THAT CHOPPER SICK!!
That's an ULTIMATE BADA⚡️⚡️ BARHOPPER! Always love the sportster American Iron. What would cost to make one for a customer. I really reallly reallly like really pumps my 🍒 THANKS for the cool candy!⚡️⚡️🍻🖕🏻
It Looked Like A Head…
Video title? Not another sportster build. The video “hey let’s go get pants”
Organized confusion
I was going to come up with something cool and witty.... but I got nuttin!!!.... *sigh*
ruclips.net/video/SIPTDm1YZMQ/видео.html --- For The Eazy Co and everyone else out there who aren't afraid to do a hard day's work and get their hands dirty. For all of the "motorcycle agents" out there. You know who you are.
Great song
@@TheEazyCo - Thanks! It's from 1966 -- THE year for Garage, the first year for Shovelheads and my favorite year for sound. Build right. Ride safe. -- W
Dude where is the T-shirt with Fiona on it that would be a killer merchandise shirt hook it up homie put the link in below I would love to buy one got it in white
Can I Send John some new pants?
Please
Nice bike but the start button being under the seat is just downright stupid.
The Lathey Co
🤘😎🤘
😎👌
comments are cool
I will comment on this
I want you guys to shave my legs and im not talking about motorcycle forks...
🐕 💩
You ain’t wrong
🍍 🍍🍍🍍🍍🍍🍍🍍
I do n did give me a address to send
Need to apologize i watch so many videos I confused you with mazi moto still wanna bring my bike from mo to ur shop 75 fxe good engin n trans rolling soft cooter mad scooter type from hidden in a ol dry barn no shit can I win a build from a good ol boy from mo you are my first subscribed just the crazy il bring mango dried from global import from the Philippines 🇵🇭 my wife's home land please let my bike take up room in your shop 4 a couple days n get the makeover
How much $ to build me one?????
How much you got?
Whats up brothers kool video like allways thanks have a blessed day frm the villanueva dont worry like and sucribe allways 👍🙏
!
Comment
Comment
Comment on this comment.
No
Don't tell me how to live my life!!!
🍍
@@TheEazyCo Them: Have a nice day!
Me: Don't tell me what to do!
Yoy guys are f ken funny f tv wcht your chanel tv boring.lol👍