Это видео недоступно.
Сожалеем об этом.
Adafruit Trinket, Neopixel and Button Project
HTML-код
- Опубликовано: 12 авг 2024
- Check Out My Site For Models and Things I Use In My Builds!
www.3dprintedprops.com/
In this video I'll be wiring and coding an Adafruit Trinket, Neopixel and Button for the Infinity Orb Cosplay Project. The Adafruit Trinket, Neopixel and Button Project was tricky but a really fun build
Arduino Program
www.arduino.cc/
Adafruit Libraries
learn.adafruit.com/adafruit-a...
Neopixel Library
github.com/adafruit/Adafruit_...
learn.adafruit.com/adafruit-n...
FastLED Library
fastled.io/blog/
Infinity Orb Project Code
gist.github.com/3D-Printed-Pr...
Electronics
Adafruit Trinket - Mini Microcontroller - 5V Logic
goo.gl/hM3QQE
Adafruit NeoPixel Jewel - 7 x WS2812 5050 RGB LED with Integrated Drivers
goo.gl/u6uqPu
PiTFT Tactile Switch Buttons (x4) [ADA1489]
goo.gl/CwFRWv
Battery Packs Lithium Ion Polymer Battery 3.7V 100mAh (1 piece)
goo.gl/6gkxAz
Power Management IC Development Tools Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On (1 piece)
goo.gl/PwUTyv
Studio Equipment
Transcend SDXC UHS-I U3 64GB High Speed Flash Memory Card, R95, W60MB/s (TS64GSDU3)
goo.gl/hdUzow
YONGNUO YN600 Air LED Camera Video Light with Color Temperature 5500K
goo.gl/G6t2fm
YONGNUO American Standard Adapter Power Switching Charger DC for Yongnuo LED Video Light YN-600 YN600
goo.gl/hui7ik
YONGNUO YN300 Air LED Camera Video Light with Adjustable Color Temperature 3200K-5500K for Canon Nikon Pentax Olympas Samsung
goo.gl/baf1Af
12 Pack Acoustic Panels Studio Foam Wedges 2" X 12" X 12"
goo.gl/yDUX5c
Rode VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardiod
goo.gl/zCqvoB
Neewer 3 Pieces 6ft/75 inch/190cm Photography Tripod Light Stands For Studio Kits,Video, Lights, Softboxes, Reflectors, etc.
goo.gl/AtwhxJ
2 Pcs Tripod Mini Ball Head for HTC VIVE Base Station,for Oculus Rift Sensor ,for lighthouses,Camera Camcorder, MDW Holder for HTC VIVE
goo.gl/9qh63v
LimoStudio AGG1501 Photography Continuous 600 Lumen LED Light Set for Table Top Studio Portable Lighting Kit with Gel Filters, Set of 2
goo.gl/XH1gu7
adafruit trinket tutorial, adafruit trinket me-pixel, adafruit trinket projects, adafruit trinket programming, adafruit trinket - mini microcontroller - 5v logic, adafruit arduino, adafruit cosplay, neopixel tutorial, neopixel projects, neopixel arduino, animated LEDS, LEDS, Cosplay lights, cosplay LEDs, trinket, neopixel, neopixel ring, neopixel jewel
Great video and clear explanation, with all the tools and links needed to do it yourself and adapt it to your own project. Nice! Thanks for putting this together and putting it out there. Can't wait to see the orb in action!
Thanks!
Thanks for walking me through. Neophite looking for ideas. Very informative
Thanks, took me a while to figure out with a bunch of help, so I wanted to be sure to pass it on. Cheers.
I need to do this but in green for my Eye of Agamotto. The wiring is easy but the programming is crazy.
This is awesome, thanks for sharing all of this! What gauge wire did you use?
Thanks for this ,
how did you wire cables to the tactile switch? it doesn't have any holes that the wires can go to, i checked the links on amazon you put
Sorry but i'm a real noob, is the Yellow line charging the battery from the USB port and the Red line is the Positive pole that comes from the battery? Is the 5v Trinket working well with a 3.7/4.2v LiPo? How about the 3.3V Trinket would it work?
I'm so lost! I ordered basically the same with exception of more led's on the ring and a slightly different backpack with USB C connector. When soldered according to your schematic, all I get are connection errors while using the trinket USB micro. Should I be using the backpack's USB C to connect instead? I can provide pics offline. (via Gmail preferably)
how to I upload the code to the trinket i get this error when i do what config do i use for it?
avrdude: Error: Could not find USBtiny device (0x1781/0xc9f)
SAME. Nothing but errors when trying to connect.
can you connect 2 neopixel rings to it?
I'm not sure. I would think so.
@@3DPrintedPropsI checked it out, these rings are chainable, output to input