Thanks Steven, This was extremely helpful. Had I not seen this video my remote would still be in a cupboard collecting dust, I tried to "Bind" to my RX for weeks with no luck, the User Manual is as clear as mud, so thanks again for your post!:-)
thanks for the video it saved me a lot of trouble. With the fixed id bind you can bypass the safety and bind with the throttle maxed to program some speed controllers :-)
Thank you Steven, it did work with me, but when ever I switch back to model I loose binding and have to do it again, note model 1 always work model 3 have to re-do binding.
I just bought one of these...comes in a few days. Can you possibly post something regarding setting up...then setting it up with the Devo 7 it comes with...settings, all of that. This is my first flybarless....want to make sure it is done correctly.
Thanks - very helpful. But I'm wondering if you can bind several different RX to the TX? I have a DEVO F12E and would like to use it one all my multirotors. But they each have different Receivers - rx1002, rx1201 and rx701. Can I use my F12E with all of these? How?
Hey Steven...was wondering since you have a Devo 10. can you explain how to set elevon mixing. The manual is not very clear on how to do this. Many Thanks
I can't get my Walkera QR-X350 Pro to fly correct after I installed a Walkera Plastic Gimbal and an ilook camera.It only flies in IOC Mode now. How do I fix this..
Hey Steve. OK I've got my Devo 12s making a sweet bind with my walkera QR-X350 but the motors won't arm. I think it's because the manual says to assign FLAP to GEAR-SW, but that's not possible as it's not an option that comes up (Can only assign to any 3 pos switch, trim, and aux's). Do you know a good setup that works?
I bought a "STORM 430 Semi-Metal Edition (RTF)" from helopal and it worked at first. I haven't been able to use it for a month and now it is not syncing up. The helo Rx is flashing "fast" and the buzzer is beeping about every two seconds. When I turn on the Tx (a Walkera Devo8s) it does not sync: no solid light on Rx. I have gone through my Tx as indicated in this tutorial but "no joy". Any help would be appreciated.
Please. I bought one and I have a Walkera Infrax Devo8S but not as encuento pair and information. Could you explain as I have to.??? As paired ...?? Thank you very much ...
I just bought a crashed V450D03 to use as a second bird. I have problems cancelling the Fixed ID on the Rx. Normally one should insert the Bind Plug in the battery channel and then connect the power. The problem is that the Rx2703H-D does NOT have a battery channel. The manual states that the bind plug should be inserted into the ELEVATOR channel. I have tried it several times, but I cannot get the receiver to flash slowly. What can I do?
Thank you Mr. Chow! You saved me from worrying about my quadcopter all night!
Thanks Steven, This was extremely helpful. Had I not seen this video my remote would still be in a cupboard collecting dust, I tried to "Bind" to my RX for weeks with no luck, the User Manual is as clear as mud, so thanks again for your post!:-)
Thanks a million times! Simple but very efficient video! Solved my daily head-scratching! Greetings from Switzerland ;)
Most easiest explanation ever!!!!! thank you sir
thanks for the video it saved me a lot of trouble. With the fixed id bind you can bypass the safety and bind with the throttle maxed to program some speed controllers :-)
Thank you soooooo much! I have the DEVO7 and it's a little different, but this really helped.
Thank you Steven, it did work with me, but when ever I switch back to model I loose binding and have to do it again, note model 1 always work model 3 have to re-do binding.
Thanks, I was not removing the binding plug, my fault.
Thank you for this video!!
I just bought one of these...comes in a few days. Can you possibly post something regarding setting up...then setting it up with the Devo 7 it comes with...settings, all of that. This is my first flybarless....want to make sure it is done correctly.
Worked perfectly. Thank you Sir so much.
Thanks - very helpful. But I'm wondering if you can bind several different RX to the TX?
I have a DEVO F12E and would like to use it one all my multirotors. But they each have different Receivers - rx1002, rx1201 and rx701.
Can I use my F12E with all of these? How?
Select models? Should even be able to name each, at least my Devo 10 can and the F12E seems a bit better than that :P
Hey Steven...was wondering since you have a Devo 10. can you explain how to set elevon mixing. The manual is not very clear on how to do this. Many Thanks
Thank's Dude your video helped a lot
Once I followed these steps and turned on the TX the light never stopped blinking, Tried it 100 times and no luck ??????
I need help binding my Devo F12E to my Walkera G400. I'm clueless when it comes to this.
I can't get my Walkera QR-X350 Pro to fly correct after I installed a Walkera Plastic Gimbal and an ilook camera.It only flies in IOC Mode now. How do I fix this..
How do you bind a Devention 8S to a rx2702v receiver?
please send us a short video on your binding process and we will try our best to find the issue.
Hey Steve.
OK I've got my Devo 12s making a sweet bind with my walkera QR-X350 but the motors won't arm.
I think it's because the manual says to assign FLAP to GEAR-SW, but that's not possible as it's not an option that comes up (Can only assign to any 3 pos switch, trim, and aux's).
Do you know a good setup that works?
Or a .bin file I can slap on with DEfusE?
I had this happen to my QR-X350 and all I did was reset my TRIM SETTINGS,
They were over set.
I bought a "STORM 430 Semi-Metal Edition (RTF)" from helopal and it worked at first. I haven't been able to use it for a month and now it is not syncing up. The helo Rx is flashing "fast" and the buzzer is beeping about every two seconds. When I turn on the Tx (a Walkera Devo8s) it does not sync: no solid light on Rx. I have gone through my Tx as indicated in this tutorial but "no joy". Any help would be appreciated.
does any other quads can bind on devo f4 or f7?
how can i bind devo 7 and rx2614vd dont spot blinking
Looks like your putting the bind jumper in sideways?
Bind plug works the same way any direction
can you bind that to the devo 7 ? if so how because mine I cant seem to get it to bind !?!?!?
Please. I bought one and I have a Walkera Infrax Devo8S but not as encuento pair and information.
Could you explain as I have to.???
As paired ...??
Thank you very much ...
thank you, work great.
my reciever dont stop flashing fast and dont want to bind
thank you very MUCH !!!!
My receiver stays on slow flashing all the time never turns solid red
awesome.!!! thanks :)
GREAT!
Merci ! :)
Horrible video can't see anything
please send us a short video on your binding process and we will try our best to find the issue.
I just bought a crashed V450D03 to use as a second bird. I have problems cancelling the Fixed ID on the Rx.
Normally one should insert the Bind Plug in the battery channel and then connect the power.
The problem is that the Rx2703H-D does NOT have a battery channel. The manual states that the bind plug should be inserted into the ELEVATOR channel. I have tried it several times, but I cannot get the receiver to flash slowly. What can I do?