do you need to press a specific button to start the magic lantern menu? everything goes well but after restarting everything keeps loking the same as original firmware
i want to format my card but keep magic lantern except the 5d ii has no q aka low level formal option to keep magiclantern , can you help me out what is a your way of formatting??
Question: Why my 5D Mark ii menu doesn't have 9 different pages (the little icons on the top), all I have is 6 pages, Do I need to do anything to get all the 9 pages? Thanks in advance.
I have installed ML on the SD card and after I did it I could see theML menus in my Canon 5D Mk2 menus but not any more. How do I navigate to them in the camera?
Hi! I have a question for you. How many minutes are you able to record in RAW mode (as you show us in the end of the video) with 64Gb? I'm guessing 15 minutes max, and that could be a problem in a near future with the dessired 4K RAW.
Hi , depending what bit depth you choose ; 10bit @ 1856x1044 24p 55MB/s write speed = 20 min 64GB , 12bit @ 1856x1044 24p 65MB/s write speed = 15 min . and if you reduce the A.R. 30 - 40 min is not out of the question . With 4k raw video on the 5D2 I'm very close to achieving compressed raw . It's the same compression used in Canon CR2 raw photos but at 10 , 12 & 14 bit Lossless , 5D3 already has this , it will give around 45-50% compression , so a 3.5k @ 2:35 A.R. with give me around 75MB/s write speed plus It's possible to over clock the CF card writer interface to around 150MB/s (work in progress) . I'm also working on getting 8bit MJpeg (Motion Jpeg)(.AVI) 4:2:2 compression , same compression as the 1DC & 5D4 in 4k . This already works with USB to PC capture but only at low resolution (1024x768) . Basically it will hook in to the Jpeg data stream before H264 compression .
Hey RedDeerCityTV I recently just bought a 5D Mark 2 and a Toshiba Exceria Pro 1066x and its great! Just one thing, How do I get 12/10 bit on this thing? I did at one point but the screen flickers purple (it was an old10/12 bit file). Im used to my 6D Raw, but the 5D2 is another story.
Dear RedDeerCityTV : Thanks for your tutorial and it helps me a lot. Could you add some content about how to update ML Firmware from an old version ML SD card? I have installed the main build in my 5D3 and want to try 4K raw shooting. Do I just 1)unzip "magiclantern-crop_rec_4k.2018Mar10.5D3123.zip" in the computer. 2)copy and paste the unzipped files to the original booted SD card in the computer.(It will replace the files with the same file name) 3) Plug the SD card into 5D3 and rotate to update firmware in 5D3. 4)Turn off and on the camera Is it correct? Thanks in advance. Jay in Taipei
When you come to installation of the files, what's your hurry? You're doing this on Windows and I use a Mac. I'm not familiar with your setup, so I can't follow you.
do you need to press a specific button to start the magic lantern menu? everything goes well but after restarting everything keeps loking the same as original firmware
i want to format my card but keep magic lantern except the 5d ii has no q
aka low level formal option to keep magiclantern , can you help me out
what is a your way of formatting??
Can we get Clean HDMI OUT from this 5DII with ML installed for use as camera source for live streaming? That would be fantastic if possible.
Question: Why my 5D Mark ii menu doesn't have 9 different pages (the little icons on the top), all I have is 6 pages, Do I need to do anything to get all the 9 pages? Thanks in advance.
hello, I have a problem trying to copy the files to the compactflash memory, I'm not allowed, could you help me
I have installed ML on the SD card and after I did it I could see theML menus in my Canon 5D Mk2 menus but not any more. How do I navigate to them in the camera?
Hi. I have 5d mark ii, but I can't I find ML. Can you share the firmware? or a link from the site
builds.magiclantern.fm/#/ & bleeding edge highly experimental (for experienced & power users only) www.magiclantern.fm/forum/index.php?topic=19336.msg182476#msg182476
Skip to 9:00
i did all steps steps but it is nit workinf
Is there a good tell of installing magic on 5D iv
I didn't get the first menu
installed magic lantern and now video won't launch
Hi! I have a question for you. How many minutes are you able to record in RAW mode (as you show us in the end of the video) with 64Gb? I'm guessing 15 minutes max, and that could be a problem in a near future with the dessired 4K RAW.
Hi , depending what bit depth you choose ; 10bit @ 1856x1044 24p 55MB/s write speed = 20 min 64GB , 12bit @ 1856x1044 24p 65MB/s write speed = 15 min . and if you reduce the A.R. 30 - 40 min is not out of the question . With 4k raw video on the 5D2 I'm very close to achieving compressed raw . It's the same compression used in Canon CR2 raw photos but at 10 , 12 & 14 bit Lossless , 5D3 already has this , it will give around 45-50% compression , so a 3.5k @ 2:35 A.R. with give me around 75MB/s write speed plus It's possible to over clock the CF card writer interface to around 150MB/s (work in progress) . I'm also working on getting 8bit MJpeg (Motion Jpeg)(.AVI) 4:2:2 compression , same compression as the 1DC & 5D4 in 4k . This already works with USB to PC capture but only at low resolution (1024x768) . Basically it will hook in to the Jpeg data stream before H264 compression .
dont even the snapchot after
Hey RedDeerCityTV
I recently just bought a 5D Mark 2 and a Toshiba Exceria Pro 1066x and its great!
Just one thing, How do I get 12/10 bit on this thing? I did at one point but the screen flickers purple (it was an old10/12 bit file).
Im used to my 6D Raw, but the 5D2 is another story.
www.magiclantern.fm/forum/index.php?topic=11205.675
Thanks Paul!
You’re welcome Zeek!
Dear RedDeerCityTV
:
Thanks for your tutorial and it helps me a lot.
Could you add some content about how to update ML Firmware from an old version ML SD card?
I have installed the main build in my 5D3 and want to try 4K raw shooting.
Do I just
1)unzip "magiclantern-crop_rec_4k.2018Mar10.5D3123.zip" in the computer.
2)copy and paste the unzipped files to the original booted SD card in the computer.(It will replace the files with the same file name)
3) Plug the SD card into 5D3 and rotate to update firmware in 5D3.
4)Turn off and on the camera
Is it correct?
Thanks in advance.
Jay in Taipei
When you come to installation of the files, what's your hurry? You're doing this on Windows and I use a Mac. I'm not familiar with your setup, so I can't follow you.
Why do you keep going from your screen to a wide shot of you? Irritating, it defeats the whole purpose of people following alone.
This tutorial could have been way much shorter. So many unnecessary steps!
Megabits really? 1 megabit= 0.125megabytes
Sorry , I mean to say Megabytes
Bruh.
really bad video, key points skipped or moved to fast.