Just bought the Cameo 4 and am excited to finally use it ! I’ve researched this machine for at least 3 years, if not longer. I’m glad I waited for the Cameo 4 in order to cut leather, among other things.
Silhouette Inc. I managed to literally cut up my mat by simply cutting paper, and I followed the instructions!🤣 Talk about trial by fire! I’m off to buy a new mat.🤦🏾♀️
this video should include "how to connect bluetooth" as mine did not automatically connect. if ur having trouble w/ bluetooth - ensure the cameo's bluetooth button glows blue, if it doesn't then touch it until it does (not too rapidly tho - it takes a few seconds), then click on the symbol to the left of the graduation cap. it's located at the bottom of the software window, slightly to the right. after u click, u will then be provided a list of silhouette devices to connect to - one of which contains the bluetooth logo (that "B"). -- hope this helps
I bought a black cameo 4 today and i had no problems with installing it. The only strange thing about this model for me is that compared to my portrait 2 it uses different cutting settings. While with the portrait 2 i can cut adhesive vinyl like Orafol 751C with knife 1 pressure 4, the cameo 4 need knife 1 pressure 18 ? This is the only negative thing because i have to discover new settings now. Is there a dust cover available for the cameo 4 ?
I wish you would have gave more information about the cutting mat. How did you attach the cardstock to the mat? Your paper seems to be stuck to it and the mat that came with the machine doesn't seem to be the same. I put the cardstock in without the mat and it was moving all over the place.
I just set up my new cameo 4 and when I go to the send panel and go to pick my machine it says cameo 2 ready now I just disconnected my 2 Why does it not recognize my 4? Am I suppose to delete something ? I’m on a Mac computer business edition version 4.3
I just received my new Cameo 4. I turned it on all of the lights flash on then the up arrow and down arrow come on and stay on but the bluetooth light will not stay on. it will flash on but will not stay on. Even if i try to push where it is I get nothing. I have completely unplugged it and plugged it back in. Installed firmware and refreshed BT on my laptop.
I have a cameo 4. I have had so many issued with the cameo blades and have wasted SO MUCH material !! I wish I had gotten the Cricut :( The pre set settings arn't right, I am always having to adjust. I cant get the premium blade to fit the housing no matter how many videos I watch/ how many ways I try. The autoblade doesn't cut half the time, yes I have cleaned it a hundred times. Or it rips the paper up, and vinyl. There's no in between. The amount of time I have spent getting the machine to cut okay, is ridiculous. Even then I have to go back over everything with a kraft knife.. which leaves me wondering why I don't just return this machine. People keep asking me if I recommend this machine and I have to be honest with them. No.
You might consider starting with a short description of what genre the Silhouette Cameo 4 is, but the deep dive you chose does have some appeal as well. Does Sstudio work on Linux?
I always get a error when doing print and cut how can I fix this? I have tried what it said on website and did not work, finally went and bought a Cricut. Would be nice to fix this problem.
I am interested in the Cameo 4--torn between the Cameo 4 and the Circuit explorer-I am a beginner. However, I can't find anywhere how to contact Silhouette except by mail. I see a lot of complaints that people cannot get help and I see that you cannot live chat and it's been down a long time. How can we get help if we have a problem?
Hello! What type of cutting blade and paper material should be used if I want to make screenprinting stencil, spray painting stencil, and decals and stickers. Can older models like Sil-Cam 3 or 2 do the same job? Thanks.
Unfortunately I cannot find anything about the use of the extra tools supplied with the Cameo 4. How they can be used with the old tools of the Cameo 3
I have Cameo 4. It is nice for cutting paper but it is totally disappointing for thicker materials. Kraft blade is almost useless, I tried several materials with many different settings and works around. It takes a lot of effort adjusting blade each time manually, so it can cut a little bit deeper each time. It almost feels that I could better use scissor than kraft blade. It is very frustrating.
Except it doesn't cut? It reads the marks and spits it back out without even attempting to cut. The blades locked in and everything. You should really include a very thorough manual with this machine.
You are so right. To have to search youtube to find the basics is just ridiculous. I've just bought a machine and have been so frustrated - absolutely nothing comes with the machine except a list of what's in the box.
I just purchased the cameo three literally four months ago and just are going to start to use it and you’re already out with the new machine what’s wrong with the cameo three
It is still the great machine people love. This new one is just faster, quieter and cuts harder things. But probably for everything you want to do, the Cameo 3 will do it ALL. Be happy! You got a good deal!
there is nothing wrong with the C3 but you just bought it at the end of its life cycle, it is already a couple of years old. The smaller portrait 2 was the newest silhouette model before the C4 and that was released in 2017, the Cameo 3 is from 2016. If you are only cutting adhesive vinyl, HTV, paper i would stick to the C3, it has the benefit that it can hold 2 tools at once because of the double port which means you can use the auto blade and a pen without switching. The Cameo 4 has a double port as well but as far as i know the 2nd port is different, it is designed to give you the 5kg of force and that means you can only use special tools in the 2nd port but not the pen for example.
You'll be absolutely happy with the Cameo 3! There's nothing wrong with it. :) The Cameo 4 just has some additional features that users have been asking for. All of these Silhouette 101 classes are filmed with the Cameo 3, so I'd start here. ruclips.net/p/PL6euVBZ4QfhynrYzTsXdO-LdLlR2QdNe3
You dont go over the unboxing process honestly. you should explain how to take all the tape off it.. what happens if i miss one of the tapes? that sounds bad
What icons does it come with, why didn't you show this.....why should I buy this product if I don't even know what I can cut and draw....oh but you advised me how I can upgrade. Money first people second what a shame
@@MrHoarses I would think so since there program isnt set for each model, but they might not be putting in a fix for our older machines. It is kind of frustrating.
Just switched from cricut and I'm not happy how unnecessarily complicated and non user friendly the print and cut feature is. I don't even know what I'm doing wrong and it's hard as hell to find a video specifically for this feature. It won't find my registration mark or it marks it way off. How do I fix this? I thought I was upgrading switching to silhouette now I'm not so sure
Is there a reason why this will not find the dam registration mark? Over 20 tries, and the only time it found it correctly is just freezes half way through the cut for no reason
Good luck. I'm done with this machine. I am having the same issue trying to cut a simple cut file! I just posted a rant and within 2 minutes instead of answering me, they deleted my comment!
Hi Silhouette, I just purchased a Cameo 4 online but up to now, I haven't registered it yet because I am not sure about my laptop if I am going to use it longer or buy new. So, I just want to ask if I can re-download the software to my new laptop even if I already installed it on my old one? Thanks in advance for your reply.
Can the software be use for designs without connecting to the machine? In other words, if I'm at the airport can i do design even though the silhouette is at my house?
I just got my Cameo 4 yesterday and the card stock paper keeps getting stuck. I cannot believe there is no customer service. I have read, read and watched videos, trying to figure it out, can someone try and help? Thanks
MAKE SURE to remove the cardboard inside the machine before turning it on, this says nothing about that. My machine made a really loud noise when i turned it on since i followed this video immediately without opening the machine.
The Cricut's last year mistake about the 20 upload only BS makes me wanna buy a Silhouette for starting out and i am about to order one. 😂 Idk how they thought they can get away with limiting people on how many times they can use their machine. That's like you buy a printer and you can only print 20 designs like wtf? 🤦🏻♂️
Did you make the swap from Cricut? I'm looking at this video and about to make the swap. I hate cricut software. It's so not user friendly. It's really hard to get it to accept SVG and DXL files.
hallieshouse13 if too sticky, just put it on your T-shirt to help with making it a little less so..I rarely use a mat..Honestly the silhouette mats need revamped,they are thin and don’t last long...There are off brands,on Amazon..you didn’t see me say to use competitors 🤪
This cutting machine is a waste of money. And also, I've been having problems with my Silhouette Connect plug-in for more than 2 months and after doing some basic troubleshooting with Silhouette representatives, they just gave up and stopped helping me and or giving me updates on wether the problem was being fixed even though I wasn't the only person having problems with the plug-in. Once your case is assigned to a representative you're stuck with that one, no one else tries to help you. I had the Cameo 2 for years and barely had any problems with that machine. The Cameo 4 does not cut well. Sometimes is cuts too much, sometimes not enough. It doesn't align to the project even when you have perfect registration marks.
I’d suggest joining a silhouette Facebook group. People in there can help you troubleshoot. These little machines are great machines. I’ve made lots of money with mine. I’ve had every single model.
me too..not functioning na adjustment 1-2, itry to adjust the measurement, the new cut result in A-B, that the reason why im not correctly print and cut
Piece of crap, i regret i bought it few months ago, Register mark dont work...one time yes 3 times no so i trow carstock plain.....i try to put only 3 elements to a page A4 to not be close to register mark printed...same crap.
wow, talk about HORRIBLE as a training video. You went from plugging it in to suddenly going to the send and being in the studio? HOW do you get the studio? GRADE F You totally left out going to the website, going into SOFTWARE, and getting what you need.
just bought one of these ... lol what a piece of junk its going back have a cameo 1 had it cutting 5 minutes out of the box after 2 hours or errors and "stuck initialising " whatever that means no cutting ... lol it says update firmware ... but doing that would void the warranty . I use much more complicated software 3ds max / autocad and don't have the patience to troubleshoot new equipment ... lol or sit around watching videos it should be obvious il have a go later and update how many hours it took to get working oh and no manual and strange directions ... all in all 1 out of 5 review
This is great. Thanks for making this, as I feel the company that builds the machine has an obligation to do these kinds of videos for its customer.
Great Video, straight to the point and not wasting my time with pointless chatter.
Just bought the Cameo 4 and am excited to finally use it ! I’ve researched this machine for at least 3 years, if not longer. I’m glad I waited for the Cameo 4 in order to cut leather, among other things.
Awesome! We hope you enjoy it! :)
Silhouette Inc. I managed to literally cut up my mat by simply cutting paper, and I followed the instructions!🤣 Talk about trial by fire! I’m off to buy a new mat.🤦🏾♀️
@@ablueslenz what was the error?
@@supjay3945 I apparently did not have my blade set properly based on the type of paper I was trying to cut. I, therefore, cut too deeply into my mat.
I'm on the fence I want either the cricut maker or cameo 4 I'm binge watching so many of these videos
Finally!!! Someone who is thorough 😎👍🏾
that's not fucking thorough she totally skip pass the download part. that shit be all over the place
I just bought the Cameo 4!!! I am sooooooo new to this.....thank you!!!
How exciting!! Enjoy! :)
Hey, i m buying one, How's your experience?
The first video that completely explained"everything" about my new Cameo! I'm brand new to cutting machines and she was clear and thorough.
this video should include "how to connect bluetooth" as mine did not automatically connect. if ur having trouble w/ bluetooth - ensure the cameo's bluetooth button glows blue, if it doesn't then touch it until it does (not too rapidly tho - it takes a few seconds), then click on the symbol to the left of the graduation cap. it's located at the bottom of the software window, slightly to the right. after u click, u will then be provided a list of silhouette devices to connect to - one of which contains the bluetooth logo (that "B"). -- hope this helps
Thank you
I bought a black cameo 4 today and i had no problems with installing it. The only strange thing about this model for me is that compared to my portrait 2 it uses different cutting settings. While with the portrait 2 i can cut adhesive vinyl like Orafol 751C with knife 1 pressure 4, the cameo 4 need knife 1 pressure 18 ? This is the only negative thing because i have to discover new settings now. Is there a dust cover available for the cameo 4 ?
Can I stipple and etch with this machine? Also, can I cut wood and what thickness?
She is very knowledgeable on the cameo 4 & software, very easy on the eyes too !!
Hello, can you do a tutorial on how to calibrate the cameo 4 please
I wish you would have gave more information about the cutting mat. How did you attach the cardstock to the mat? Your paper seems to be stuck to it and the mat that came with the machine doesn't seem to be the same. I put the cardstock in without the mat and it was moving all over the place.
Excellent video, thank you for making this!
I just set up my new cameo 4 and when I go to the send panel and go to pick my machine it says cameo 2 ready now I just disconnected my 2
Why does it not recognize my 4? Am I suppose to delete something ? I’m on a Mac computer business edition version 4.3
I just received my new Cameo 4. I turned it on all of the lights flash on then the up arrow and down arrow come on and stay on but the bluetooth light will not stay on. it will flash on but will not stay on. Even if i try to push where it is I get nothing. I have completely unplugged it and plugged it back in. Installed firmware and refreshed BT on my laptop.
I have a cameo 4. I have had so many issued with the cameo blades and have wasted SO MUCH material !! I wish I had gotten the Cricut :( The pre set settings arn't right, I am always having to adjust. I cant get the premium blade to fit the housing no matter how many videos I watch/ how many ways I try. The autoblade doesn't cut half the time, yes I have cleaned it a hundred times. Or it rips the paper up, and vinyl. There's no in between. The amount of time I have spent getting the machine to cut okay, is ridiculous. Even then I have to go back over everything with a kraft knife.. which leaves me wondering why I don't just return this machine. People keep asking me if I recommend this machine and I have to be honest with them. No.
You might consider starting with a short description of what genre the Silhouette Cameo 4 is, but the deep dive you chose does have some appeal as well.
Does Sstudio work on Linux?
What is the maximum thickness of cardstock that the Silhouette Cameo 4 can cut and score?
I have Business addition software for my Cameo 3, will i still be able to use same software? Thank you!
Melissa M es..the software is the same for all of them
Hi Does cameo print colours or its only a cutting machine
I always get a error when doing print and cut how can I fix this? I have tried what it said on website and did not work, finally went and bought a Cricut. Would be nice to fix this problem.
Makes my choice easier
can I unregister my cameo 2 for sell and how, thank you.
Est-ce que je peux télécharger le programme, logiciel sur un iPad Pro
I am interested in the Cameo 4--torn between the Cameo 4 and the Circuit explorer-I am a beginner. However, I can't find anywhere how to contact Silhouette except by mail. I see a lot of complaints that people cannot get help and I see that you cannot live chat and it's been down a long time. How can we get help if we have a problem?
Hello! What type of cutting blade and paper material should be used if I want to make screenprinting stencil, spray painting stencil, and decals and stickers. Can older models like Sil-Cam 3 or 2 do the same job? Thanks.
can you do a video on the blades alone?
I could not find my free downloads in my silhouette studio library. I've already registered but the library shows empty.
What kind of printer do you have to have for the cameo 4?
Unfortunately I cannot find anything about the use of the extra tools supplied with the
Cameo 4.
How they can be used with the old tools of the Cameo 3
excellent tutorial . Thank you !
Can you please tell me what to use to cut acetate? Tried but it says I don't have the right tool ( autoblade)
what material this auto blade cuts? and how many blade do they exist?
Good night, I moved to Orlando recently and would like to know what kind of white paper I can use to replace the offset I used in Brazil?
What is causing my EASY SUBLI TRANSFER VINYL To cut all the way thru?
I have Cameo 4. It is nice for cutting paper but it is totally disappointing for thicker materials. Kraft blade is almost useless, I tried several materials with many different settings and works around. It takes a lot of effort adjusting blade each time manually, so it can cut a little bit deeper each time. It almost feels that I could better use scissor than kraft blade. It is very frustrating.
Except it doesn't cut? It reads the marks and spits it back out without even attempting to cut. The blades locked in and everything. You should really include a very thorough manual with this machine.
You are so right. To have to search youtube to find the basics is just ridiculous. I've just bought a machine and have been so frustrated - absolutely nothing comes with the machine except a list of what's in the box.
I just purchased the cameo three literally four months ago and just are going to start to use it and you’re already out with the new machine what’s wrong with the cameo three
It is still the great machine people love. This new one is just faster, quieter and cuts harder things. But probably for everything you want to do, the Cameo 3 will do it ALL. Be happy! You got a good deal!
I just happened to buy mine today, and didn't even know this model was new. Lucky!
there is nothing wrong with the C3 but you just bought it at the end of its life cycle, it is already a couple of years old. The smaller portrait 2 was the newest silhouette model before the C4 and that was released in 2017, the Cameo 3 is from 2016. If you are only cutting adhesive vinyl, HTV, paper i would stick to the C3, it has the benefit that it can hold 2 tools at once because of the double port which means you can use the auto blade and a pen without switching. The Cameo 4 has a double port as well but as far as i know the 2nd port is different, it is designed to give you the 5kg of force and that means you can only use special tools in the 2nd port but not the pen for example.
You'll be absolutely happy with the Cameo 3! There's nothing wrong with it. :) The Cameo 4 just has some additional features that users have been asking for. All of these Silhouette 101 classes are filmed with the Cameo 3, so I'd start here. ruclips.net/p/PL6euVBZ4QfhynrYzTsXdO-LdLlR2QdNe3
Tutorial on how to use Silhoutte Go on ipad please!
I am so confused. There are so many cutters out there to use. Thank you for this video.
The information at 6:40 is incorrect. A4 is narrower than letter and is the first triangle. Then letter/legal, which is wider.
No it's not
You dont go over the unboxing process honestly. you should explain how to take all the tape off it.. what happens if i miss one of the tapes? that sounds bad
What icons does it come with, why didn't you show this.....why should I buy this product if I don't even know what I can cut and draw....oh but you advised me how I can upgrade. Money first people second what a shame
Can you use a phone to blue tooth
Can it cut balsa wood or engrave?
non cè una versione in italiano dato che viene venduta anche in italia?
Still using the cameo 1 with zero issues.
Great to hear this :)
I´m new to the "game", so I bought a Cameo 4 and hope that I can say the same when the Cameo 7 is out :D
I have the cameo 1 too. Have you been able to cut felt or craft foam with it?
Staunch I am too except I have had issue with Windows 10 updates causing printing issues
@@leslie6362 It would be interesting to know if silhouette still support the older models.
@@MrHoarses I would think so since there program isnt set for each model, but they might not be putting in a fix for our older machines. It is kind of frustrating.
bonjour vous pouvez me conseiller soit la caméo silhouette4 ou la cricut maker ? merci beaucoup
Can you upload a drawing to the programe?
Just switched from cricut and I'm not happy how unnecessarily complicated and non user friendly the print and cut feature is. I don't even know what I'm doing wrong and it's hard as hell to find a video specifically for this feature. It won't find my registration mark or it marks it way off. How do I fix this? I thought I was upgrading switching to silhouette now I'm not so sure
I’m having the same issue. It’s so frustrating
Someone please help me, my cameo 4 says failed to register, what can I do.
Is there a reason why this will not find the dam registration mark? Over 20 tries, and the only time it found it correctly is just freezes half way through the cut for no reason
Good luck. I'm done with this machine. I am having the same issue trying to cut a simple cut file! I just posted a rant and within 2 minutes instead of answering me, they deleted my comment!
Hi Silhouette, I just purchased a Cameo 4 online but up to now, I haven't registered it yet because I am not sure about my laptop if I am going to use it longer or buy new. So, I just want to ask if I can re-download the software to my new laptop even if I already installed it on my old one? Thanks in advance for your reply.
Jay Cue you get 3 downloads with your software purchase..So you can have it on a laptop and a pc..hth
@@angelmom916 thank you for your reply. I will need it in the future. As for now, I am using my old laptop and doing good.
@@jerrycue yeah another viewer will answer you this company won't they're the worst at customer service.
when cameo 4 pro 20" to Indonesia ?
How accurate is the auto blade? I am still working with my Cameo 2, but I’ve heard that it’s “off”.
it works like dream. ive been using a curio all long, recently purchased the Sil-Cam 4
First day it's and givimg me a headache (I have the cameo4plus)
I use the autoblade with my cameo 3 and I love it. Not problems at all unless they are my own for not changing the media setting.
Hi, Can I use the software on a Mac?
Yes you can. Works great too
I am from Pakistan where from i can get comeo 4
AMAZON
Y en español ? Para cuando ?
when i trace my logo the yellow for the trace doesnt show up
I really need help bought my cameo and I am so afraid to use the machine I don’t know how to use it
COMO EU FAÇO PRA A
SSISTIR ESSE VIDEO EM PORTUGUÊS???
She's so lovely
damm they got angela from the office to be in this
No hay uno en español????
Can the software be use for designs without connecting to the machine? In other words, if I'm at the airport can i do design even though the silhouette is at my house?
1Don GazaMan yes you can. I very often do all my card designs before connecting the machine to my laptop.
Is it available in India??
You can call ambition gifts for ordering: We are an authorized distributor of Silhouette America in India: +919555263344(JAGJEET SINGH)
I just got my Cameo 4 yesterday and the card stock paper keeps getting stuck. I cannot believe there is no customer service. I have read, read and watched videos, trying to figure it out, can someone try and help? Thanks
can i import this in india ? and how ?
You can call ambition gifts for ordering: We are an authorized distributor of Silhouette America in India: +919555263344(JAGJEET SINGH)
my cameo 4 stop cut after 20 sticker a4 paper and to hot .
Can you use the silhouette camero4 with an ipad?
Currently you cannot.
jammer dat die uitleg altijd in het Engels is , ik versta er niks van
MAKE SURE to remove the cardboard inside the machine before turning it on, this says nothing about that. My machine made a really loud noise when i turned it on since i followed this video immediately without opening the machine.
It does not offer any "fonts"; it offers "typefaces. There's a difference.
Thank you
down the rabbit hole
The Cricut's last year mistake about the 20 upload only BS makes me wanna buy a Silhouette for starting out and i am about to order one. 😂 Idk how they thought they can get away with limiting people on how many times they can use their machine. That's like you buy a printer and you can only print 20 designs like wtf? 🤦🏻♂️
Did you make the swap from Cricut? I'm looking at this video and about to make the swap. I hate cricut software. It's so not user friendly. It's really hard to get it to accept SVG and DXL files.
Thanks, But I viewed at 2.0 speed :))
The mat is an issue. Either too sticky or you can’t adhere anything. I e wanted so much money on replacement mats
@lillie75232 Thank you!
hallieshouse13 if too sticky, just put it on your T-shirt to help with making it a little less so..I rarely use a mat..Honestly the silhouette mats need revamped,they are thin and don’t last long...There are off brands,on Amazon..you didn’t see me say to use competitors 🤪
This cutting machine is a waste of money. And also, I've been having problems with my Silhouette Connect plug-in for more than 2 months and after doing some basic troubleshooting with Silhouette representatives, they just gave up and stopped helping me and or giving me updates on wether the problem was being fixed even though I wasn't the only person having problems with the plug-in. Once your case is assigned to a representative you're stuck with that one, no one else tries to help you.
I had the Cameo 2 for years and barely had any problems with that machine.
The Cameo 4 does not cut well. Sometimes is cuts too much, sometimes not enough. It doesn't align to the project even when you have perfect registration marks.
You re right. Have same problem.
I'm having the same exact issue. Machine keeps going crazy I figured it would easily find it but each time it locates it somewhere else smh.
I’d suggest joining a silhouette Facebook group. People in there can help you troubleshoot. These little machines are great machines. I’ve made lots of money with mine. I’ve had every single model.
me too..not functioning na adjustment 1-2, itry to adjust the measurement, the new cut result in A-B, that the reason why im not correctly print and cut
She needs to learn how to smile.....
Who's here after cricut is trying to make everyone pay for their monthly subscription 🤔
lol....me
Meeeee!!!!!
10:31 Aaand cut.
Who taught you any of this? Poor marketing on their part. I’m beyond frustrated because there are NO instructions whatsoever.
Piece of crap, i regret i bought it few months ago, Register mark dont work...one time yes 3 times no so i trow carstock plain.....i try to put only 3 elements to a page A4 to not be close to register mark printed...same crap.
Is this woman a robot??
wow, talk about HORRIBLE as a training video. You went from plugging it in to suddenly going to the send and being in the studio? HOW do you get the studio? GRADE F You totally left out going to the website, going into SOFTWARE, and getting what you need.
just bought one of these ... lol what a piece of junk its going back
have a cameo 1 had it cutting 5 minutes out of the box
after 2 hours or errors and "stuck initialising " whatever that means
no cutting ... lol
it says update firmware ... but doing that would void the warranty .
I use much more complicated software 3ds max / autocad
and don't have the patience to troubleshoot new equipment ... lol
or sit around watching videos
it should be obvious
il have a go later and update how many hours it took to get working
oh and no manual and strange directions ...
all in all 1 out of 5 review
sugarland
K
Video suck. Don’t show how to install the software at all
What a pity this is presented with no joy at all! Dull to watch and doesn’t inspire me at all I’m afraid.