Thanks for good video Sandy! I manged to get it open by using fifth gear and brakes, just in case added spanner to driveshaft flex disc bolt to hold against body. But damn it was tight, I had to use 3/4 sockets and 1m pipe :S I could not find opening to flywheel underneath facelift E46 320d manual, otherwise I would have tried your trick also.
Hello friend.There is a problem and I'm looking for advice.I have a bmw E46 diesel 2003.The problem is that I'm in the last year changed 4 times the crankshaft pulley, it something BREAKS , but I can't understand.Thank you
Dima German hello friend ask these guys ruclips.net/channel/UCHr8jUDLpkcYgg3Axhu7qhw they are BMW experts, could be partially seized Aircon compressor or another pulley?
Авто/Мото
Thanks for good video Sandy! I manged to get it open by using fifth gear and brakes, just in case added spanner to driveshaft flex disc bolt to hold against body. But damn it was tight, I had to use 3/4 sockets and 1m pipe :S I could not find opening to flywheel underneath facelift E46 320d manual, otherwise I would have tried your trick also.
Glad to help cheers sandy
Great guide thank you
220K Miles and no pully, but this is why im looking at this video. Thinking of doing.
Use a small jack to hold the chisel in place on flywheel if u dont have another of hands ready
damn 420 that crank pulley is high af
Adam 1 ruclips.net/video/bNO3bSbrZFE/видео.html
happened to me too. crank pully disintegrated at 110k miles. ststement of the obvious but its recomended to change the belts at the same time.
ruclips.net/video/bNO3bSbrZFE/видео.html
Hello friend.There is a problem and I'm looking for advice.I have a bmw E46 diesel 2003.The problem is that I'm in the last year changed 4 times the crankshaft pulley, it something BREAKS , but I can't understand.Thank you
Dima German hello friend ask these guys ruclips.net/channel/UCHr8jUDLpkcYgg3Axhu7qhw they are BMW experts, could be partially seized Aircon compressor or another pulley?
Is your car Remapped? What bhp is it?
why cant i just put it in gear soo i get the crankshaft pulley bolt loose?
Check out my vid it explain better ruclips.net/video/bNO3bSbrZFE/видео.html
serious question. what accent are you talking in?
Scottish
Is this just a normal threaded bolt left to loosen and right to tighten?
Yes it is my friend
@@sandyande thank you going to tackle mine tomorrow
Can't you leave the car in gear with some one sitting in it with their foot on the break to lock the engine up?
Tried that no chance!
At which mileage you replace the crankshaft pulley
130,000 miles
Did this pulley also cause vibration at idle speed?
Yes
Why would u do it in 6th gear? Stick it in first, handbrake on and get that bolt off
Tried that doesn't work
Dose anyone know how todo with automatic gearbox??
Nop
Do not lock flywheel, it put too much stress on crankshaft, use proper tool.
Haven't got proper tool, one must work with what one has available!!! I've had no problems since repair.
What propper tool?
Kia sportaj 2008
I replaced it exacly as it said here but now car wont start...
Petrol or diesel?
Diesel 320d
Are u getting RPM reading on tachometer/rev counter when u crank it over?
Yes the rod lifts a little bit above the 0 in spidometer when i try to crank it
How would crank pulley affect the car starting?
you talk very quickly about slow actions in the work phases and your English is unclear and bad ...
Hello, English is not my first language it's broad Scots!!! Cheers sandy