Milwaukee Mag Drill, Seized chuck repair DIY Step x Step guide how to fix it permanently Part 1

I show you how to remove a seized attachment in a Milwaukee quick-release chuck using only THREE tools. Check out part 2 for the correct chuck placement, I made an error on this video, corrected in part 2
Before we move any further, I have a small request to ask. If this video helped you please take a minute and subscribe to my channel it helps a lot:
/ @jackofallmasterofplumb
You'll find more useful tutorials on JACK of all master of PLUMB. Here are some of them:
👉 How to change delta shower cartridge: • Pro tips, change Delta...
👉Tips for maintaining your water heater, Step by Step guide DIY plumbing tips • Tips for maintaining y...
👉 How to do basic maintenance on your own AC. AC not blowing cold air? Step by step guide HVAC DIY • How to do basic mainte...
Now back to our video. You need some tools, but I guess you already have everything you need in your house already. If you don't, here is a list of tools I am using in this video:
In USA purchases
Circlip/split ring removal tool amzn.to/3WHZYRd
Hammer amzn.to/4bDGW2W
Milwaukee mag drill amzn.to/4bl1cX5
In Canada purchases
Circlip/split ring removal tool amzn.to/3QR5w8n
Hammer amzn.to/3V0K4jE
Milwaukee mag drill amzn.to/44INnPL
Amazon affiliate links within, no extra charge to you we just receive a small commission that helps keep this channel going. Thank you for your support.
Thank you for watching my video Milwaukee Mag Drill, Seized chuck repair DIY Step x Step guide how to fix it permanently Part 1
I hope it helped you!
#howto #dyi #milwaukeetools #diyprojects #fix #handyman #milwaukee

[@MrElwir]

Finally a solution to my newer Milwaukee mag drill.
I even called Milwaukee head quarters and spoke with their engineers and they had no idea what to say or how to help over the phone. Just to take it in for service.
But the voice over and zoomed out video definitely suck. Could have just posted a normal video

[@JACKofallmasterofPLUMB]

Glad it helped. Noted

[@ericbellemare7529]

Thanks for your video I had a similar issue. Make sure you turn the outer ring properly to wind the big spring to keep it automatically locked. You did it wrong it is not supposed to stay in the unlocked position. It is hard to get it on the first try but after trying 3-4 times I got it right!

[@JACKofallmasterofPLUMB]

Thanks, will do!

[@JACKofallmasterofPLUMB]

Thanks again for pointing that out. We’ve not used it since the repair so I’m happy you noticed it. I will be posting that part of the fix shortly so if anyone else has the same issue check out part 2 of this video. Thanks @ericbellemare7529

[@JACKofallmasterofPLUMB]

Here is part 2 everyone
ruclips.net/video/M4WJW5rxrXQ/видео.htmlsi=Jyeh1yBR-aa5DJcU