Boss ask ko lang kung nasubukan nyo na bang gumamit ng combination ng mechanical lifting tulad ng “Linear Actuator” sa mga wood project nyo, Boss sana on future magkaroon kyo ng project feature ng Linear Actuator like Lifting Wood Desk project bigay guide lang po sa aming mga aspiring wanna be pro someday na wood carpenter’s.
Matagal na akong furniture carpenter bro. Semi mano2. kasi dto sa mindanao hindi masyadong advance ang gamit. Para saken hindi essential and miter saw. Pero ang table saw napaka importante.
Hello idol furniture shop po ang kinalakihan ko 40yrs na po ang shop namin pero ang gaganda ng mga toools mo 🥺 kahit man lang sana yung flat planer mo idol😮😢 from isabela♥️♥️
Ako kapag mahaba at rip cut table saw. Miter saw mostly pang cross cut ko at sa mga S4S timber. Accu cut naman kapag mag rip ng plywood to 16" or 12" wide.
Meron po bang discounts si powerhouse, kasi dahil sa mga video mo parang powerhouse na Yung brand na gusto Kong bilhin na mga power tools as a new DIYer.
I don't think na necessarily mali ka sir sa pagbili muna ng miter saw over the table saw. Sabi nga nila don't buy a tool just IN CASE you need a it; buy it WHEN you need it. For you, perhaps buying the miter saw was the best decision at that time, and when you built up enough confidence, you were ready to use the table saw and found a need for it. Kesa naman maoverwhelm ka, baka madisgrasya ka pa dahil sa anxiety mo. Goods na yun. After all, in a workshop like yours, it's good to have both miter and table saws in the long run. That said, I am buying the table saw kasi it fits the purposes sa gagawin kong DIY projects soon. Due diligence ko na lang magresearch first and foremost kasi kahit ano namang power tools, safety is key. I want to know what things to keep in mind first for safety (especially since breadwinner ako and ayokong madisgrasya kasi wala akong budget for that) and how to make effective use of the tool. Mamaya mali pala pagkagamit ko, di ba? Kasalanan ko pala. 😅 After all, a good craftsperson doesn't blame their tools but their understanding and mastery.
sana minention mo idol ung accuracy ng table saw at miter saw. mostly ng nasa market hindi square out of the box. ung iba kasing newbie na aspiring woodworker minsan disappointed pag inacurate ung mga cuts. ung iba hindi 90deg out of the box, at ung miter setting d rin tama need ng adjustments. gnun dn sa TS ang fence minsan hindi square sa harap at dulo
if i could turn back time di ako bbili ng circular saw as a hobbyist woodworker. i do hardwoods. instead, ddiy ko nlng or save up for band saw tapos sympre circular saw. reason for this is pwdeng mas straight putol ng circular pero si bandsaw kaya mg kurba also kaya magresaw malalapad n boards. si circular cut 2x lng kya i resaw. risky pa
Salamat sa pag share ng knowledge sir, binabayaran pa itong ganitong lesson sa skwela, dito oras lang ang kapalit. Salamat po more power.
malinaw idol. yan gusto ko sayo napakaclear ng explanation. salamat idol. more vlog to come
Aus! salamat malaki tulong ito sir sa akin na nag iisip qng magtable o miter aq.
nice vid lodi sa comparison. tama lang sa maliit na workshop. and nice brand. power sa powerhouse.
ang ganda ng miter saw for cross cut.. sana mag karoon din poh ako ng ganyan..
Boss ask ko lang kung nasubukan nyo na bang gumamit ng combination ng mechanical lifting tulad ng “Linear Actuator” sa mga wood project nyo, Boss sana on future magkaroon kyo ng project feature ng Linear Actuator like Lifting Wood Desk project bigay guide lang po sa aming mga aspiring wanna be pro someday na wood carpenter’s.
Salamat sa tip ganyan din pinag iisipan ko habang nag iipon ng mga tools
Matagal na akong furniture carpenter bro. Semi mano2. kasi dto sa mindanao hindi masyadong advance ang gamit. Para saken hindi essential and miter saw. Pero ang table saw napaka importante.
Nagulo nga tol hahaha 😂 , pero ganda ng lesson nice vid , watching frm taiwan
Sana Bro. maka pag unboxing and review ka din ng isang CORDLESS PORTABLE BAND SAW. Looking forward to this.
Hello idol furniture shop po ang kinalakihan ko 40yrs na po ang shop namin pero ang gaganda ng mga toools mo 🥺 kahit man lang sana yung flat planer mo idol😮😢 from isabela♥️♥️
Yung mga di pa naka subscribe jan... Click nyo lang, libre yan.. more power katol
good day sir, gusto ko sana mag start mag wood working, derecho ko na ba sa table saw or mag circular saw muna ako?
hangang nganga na lang muna ako habang nanonood 🤣, wala pambili ng mga power tools kahit gusto ko matuto at gumawa din ng project
Boss Yung miter saw ba pwedeng gawing cut off saw. Thx po pagnasagot
Bos meron nba sa powerhouse plasma cutter built in compressor
🖐 high five sir...ganyan na ganyan ako at hanggang ngayon wala parin akong table saw. Tsk tsk
Ako kapag mahaba at rip cut table saw. Miter saw mostly pang cross cut ko at sa mga S4S timber. Accu cut naman kapag mag rip ng plywood to 16" or 12" wide.
Meron po bang discounts si powerhouse, kasi dahil sa mga video mo parang powerhouse na Yung brand na gusto Kong bilhin na mga power tools as a new DIYer.
Sarap siguro sa feeling pag madami kang power tools
I don't think na necessarily mali ka sir sa pagbili muna ng miter saw over the table saw. Sabi nga nila don't buy a tool just IN CASE you need a it; buy it WHEN you need it. For you, perhaps buying the miter saw was the best decision at that time, and when you built up enough confidence, you were ready to use the table saw and found a need for it. Kesa naman maoverwhelm ka, baka madisgrasya ka pa dahil sa anxiety mo. Goods na yun. After all, in a workshop like yours, it's good to have both miter and table saws in the long run.
That said, I am buying the table saw kasi it fits the purposes sa gagawin kong DIY projects soon. Due diligence ko na lang magresearch first and foremost kasi kahit ano namang power tools, safety is key. I want to know what things to keep in mind first for safety (especially since breadwinner ako and ayokong madisgrasya kasi wala akong budget for that) and how to make effective use of the tool. Mamaya mali pala pagkagamit ko, di ba? Kasalanan ko pala. 😅 After all, a good craftsperson doesn't blame their tools but their understanding and mastery.
sana minention mo idol ung accuracy ng table saw at miter saw. mostly ng nasa market hindi square out of the box. ung iba kasing newbie na aspiring woodworker minsan disappointed pag inacurate ung mga cuts. ung iba hindi 90deg out of the box, at ung miter setting d rin tama need ng adjustments. gnun dn sa TS ang fence minsan hindi square sa harap at dulo
Cover ntin calibrtion next time
Sir ano Yung metal na inilagay nyo sa canal Ng TS Ng nag assemble kayo Ng cross cut sled? Please reply nman..thank u God bless you more!
idol, good day po. just to inform you lng po bakit di na ako maka access sa online course po natin.salamat
Sir. sana mabasa mo ito. pwede po ba Miter Saw sa mga tubular? max 2mm sana po may video Din. salamats po
Magkano nman boss yung mitresaw at anong laki ng blade?thanks
if i could turn back time di ako bbili ng circular saw as a hobbyist woodworker. i do hardwoods.
instead, ddiy ko nlng or save up for band saw tapos sympre circular saw. reason for this is pwdeng mas straight putol ng circular pero si bandsaw kaya mg kurba also kaya magresaw malalapad n boards. si circular cut 2x lng kya i resaw. risky pa
yung crosscut naman madali din sa circular saw as long as may guide.. lalo kung cordless aluminum yung plate magaan lng
Ako din sakit GAS pero dalawa 😅 Guitar and gear acquisition syndrome
Ayowwwwnnnn galeng
Magkano kaya ganyan boss
kung kaya bumili ng table saw, un tlga dpt unahin. kaya ng circular ginagawa ng miter, mas marami ka pa ngang magagawa sa circular.
hay gusto ko nyan :(
Table saw pinaka-important.. miter saw and least important... good luck as dado at lap joints mo sa circular at miter lol
PRICE PLEASE
sakto yung video
gusto ko bumili ng table saw gagamitin ko sa tiles hahahahahahahaha
lol, importante table saw
daming pasakalye ng content mo..
Yan yung tinatawag na average viewer duration :)
Magkano kaya ganyan boss
PRICE PLEASE