My Wolf A1 upper is one of my fave 16" uppers. It is VERY accurate and the recoil is only a LITTLE more than a regular DI AR upper. Its really cool with a binary.....very easy double taps
yesterday, and am extremely disappointed. The third round stuck in the chamber, the extractor ripping a chunk out of the rim. Another empty had the rim with a slightly upturned lip, from the extractor. Also, the bore has extremely rough spots in it, to the point of leaving "fur" from patches stuck to the rough spots. Upon inspection, the chamber has blackened rough spots in it, like scabs. On fired, and chambered but unfired cases, the shoulder as well as the head area exhibit bright rub marks, making me wonder if it has a short chamber or insufficient headspace. Ammo was Norma Tactical and M-193. Wolf upper is paired with KE Arms polymer lower and JP Silent Buffer System with Gen ll H2 weights. Jess1344
@@jkharris488 the gun ships with syrup like anti rust "oil" that is very hard to clean . Treat the gun as it was shipped with cosmoline an fully clean and remove the oil. That is what the back scabs are and I would bet what us also in the barrle.
@@jkharris488 My A1 Barrel was completely trashed when I got it. It had two lines that ran straight down the length of the barrel and exhibited extreme copper fouling when I cleaned it out of the box (Left over from test firing, no doubt). Great platform, but reach out to T91 tactical too see if they can set you up with a chrome lined BBL. If not try "Tubb's Final Finish" ammo. That ammo works miracles on trashed barrels.
You, sir, are a wealth of knowledge. I would love to spend a day at the range w you just talking military arms. Thanks for all the content. You're a legend.
One thing that the Wolf A1 is cool for is with 22 lr conversion kits. I take the piston out and stick a CMMG Bravo in it and it eats whatever I throw at it. Taking the piston out means no nasty 22 crud dirtying up the gas system as opposed to a DI system getting stuff in the gas tube.
So, bought a Wolf A1 Upper and it had a trashed barrel. But I loved the system so I went to T91 Tactical who set me up with a barrel, block, furniture, bayo and sling and.. I built it on a poverty pony lower with a BCM lower kit. I got too say. It is a HELL of a gun. Even for the $$$ I got into it, it is a great platform. I don't think I would take an MR over what I got in my T91 clone.
I still can’t believe the MR556A1 doesn’t even come with the iconic H&K sights or quad rail anymore, not to mention the fact the barrel isn’t even chrome-lined.
I also just recently discovered that they aren’t coming with the humpback H&K grips and instead Magpul grips. It’s like H&K wants to make it less and less like the HK416.
@@luger700 the more I look at the mr556 it makes me mad. HK has 30+ years of issues with straight up importing their guns to us as created, but if they’re going to do this make the rifle closer in Msrp price to the mcx virtus
@@lioncelica5170 That’s exactly my thought as well. When I spoke to H&K reps about it over the phone, they claimed they made the alterations due to “shooter demands”.
I've got a T91 12.5" upper on my "firearm" lower that's sitting within arm's reach, magazine full of IMI 77gr. My experience with the HK agrees with yours and Bartocci's. Just not an impressive firearm for the price. The HK sells for SCAR money and between those 2 I'll take the SCAR any day. But actually I chose neither. The T91 suits me fine. So bring it on HK fanbois! I could use a good laugh.
I have been wanting to pick up a t91. This was a great comparison. I am working now on mating my ar stoner side charging upper with my adams arms piston setup. Just ordered an extra bcg to drill the charging handle handle hole. Haha. I will put a loose video up when done.
Jay has the 16.1" upper and I have the 14.5 (pinned FH). Both have been good for us. I like mine as its a bit lighter and shorter. Jay prefers his as it gives a little better range and accuracy.
T91 all the way. I would even choose a normal AR over the MR556. For that price you can buy/build a nice DI gun. Thanks Misha I always like seeing AR variants.
Thank you much for watching. Honestly, I think if HK had given us a real 416 upper on a semi-only lower (like Colt did with the LE6920 for example), I would have liked it a lot more. But for this video, i had to go with the gun sold on the US commercial market, and what we got was the MR556A1. Just as i went with the Wolf A1 upper, which is the civilian version of the T91 available to us also.
@@NorthernNorthdude91749 the biggest benefit of a piston is running suppressed without as much gas to the face. That's not a big deal to me, so it doesn't outweigh the fact that you're adding weight and more reciprocating mass to the front of the gun (which does alot to make it feel heavier than it is and adds to felt recoil), not to mention adds more moving parts (therefore more failure points).
After shooting many AR-types, I feel in love with the MR556 (for some odd reason named the MR223 here in the Netherlands, and I believe in most of Europe). It's so accurate that I can write with it at 100 yards. (And yes, that's with factory ammo.) The quality machining, zero tolerance fit and pins that can't accidentally come loose, I just love it. Quite the difference compared to the Diemaco C7 I had when I was in the reserve forces (not a bad rifle per se, but man she was well used to say the least...). I have to be honest though: I've never shot a T91. Would love to, but I've never seen one on this side of the pond. I get the preference for the T91 when both rifles are judged for 'common' military or self-defense purposes. You don't need a fast sports car when you're always stuck in traffic. In my opinion however, for any serious match shooter or perhaps also a special forces operator who wants/needs sub MOA accuracy (and who doesn't mind the bit of extra weight), the H&K is well worth the price. You've probably guessed by now: I doubt the T91 could outperform the H&K when it comes to the H&K's sheer accuracy, but anybody who has different experience can correct me. I'm no H&K fanboy with blinders on, so I can take it. (Comments on my English are also welcome, by the way.) Anyway, I really like your videos, MIsha. Maybe nice to know that you also have subscribers in the Netherlands. You really know what you're talking about and despite the fact that you generally provide us with lots of (great) info, you still manage to keep your videos interesting right up until the end. Keep 'm coming and keep up the good work!
For the average shooter, T91 works just fine. Most of us can't drop 2k on the hk but then again why when u can by 3 of T91. Unless u into some sub moa bullsjit, T91 will hold up to the hk all day. At the end of the day T91 will go bang the same way. Use the balance and pay off kids braces. NOW THATS real man, not a p...sy hk fan boy.
The problem with the HK is the upper by itself is a $2500-$3k upper. The wolf Upper can be had for $500-$600. Sure the wolf may not be as accurate as the HK but I’d be willing to bet the wolf is 100% just as reliable as the HK416/223 is. So for 1/5-1/6 the price I’d say any civilian would be much better off with the wolf.
German precision vs Chinese practicality...For the price, the Wolf upper (plus an 'anti-tilt' buffer, perhaps) wins all around for me! Does either gas system have adjustment settings?
Thanks much for watching, and no, neither has manual adjustments. I think for the HK you would have to replace the gas block. On the A1/T91 you may have to do this or might just be able to use a different regulator with more positions, not sure?
Thank you for reminding me of the distinction. I have huge respect for Taiwan, and your determination to maintain your independence. I hope the West (and the US especially) continues to support you!
If cost is not a concern, I would prefer HK416 as my standard issue rifle, haha. I had only shot T65K2 and T91in the military, no way for me to actually compare.
@@danendraarkananta9442 That's not necessarily true for a 5.56 rifle. Steel cased ammo is very underpowered compared to military loads and steel doesn't function the same as brass inside the chamber. The only reason most ar's work with Wolf and the like, is most companies over gas their rifles specifically for that reason. If you have an adjustable gas block and properly tune it for M193 or M855 it won't run steel cased ammo reliably.
@@danendraarkananta9442 No, they are overgassed for reliability in adverse conditions. Edit: The former refers to the military carbines. Cheap ar's are overgassed so they'll run weak steel cased ammo reliably.
What sort of rail section fits on the top? I tried searching their website and all they have is the full m-lock handguard replacement. I am interested in just having a rail section on the top, but can't find any information anywhere.
T91 Tactical has a tri-rail piece that can mount to the handguard directly. It is just some short top and side rail sections, and it won't work for optics mounting. However, if you just need a light or some other simple fore end accessories it will work.
I just finished a T91 build, I mated the PSA magpul lower with it. I fell in love with the rifle! Only if I had the cash for that HK rifle. What’s the 3rd or 4th option to the HK?
T91 Tactical is where we sourced all of our build parts. The PG is only $20. The issue with the stock is you have to have the T91 buffer tube, which comes with the stock, end plate and a castle nut for $100. The folks at T91 were really helpful when building out our rifles so we can recommend them based on our experience. - Jay
Me thinks you stumbled upon the wrong site. T91Tactical has very decent prices for real military (not airsoft) parts. Hey, cheaper than Colt at least right? hehe
I'm trying to weigh if a 300 dollar plane ticket to the motherland would offset the cost of the finding the parts in country vs t91 tactical. They have a nice selection.
The H&K is a rich man’s piston AR. The T91 is a poor man’s piston AR. I bought the T91 upper and mated it with my Stag Arms lower receiver and it suits me just fine. It performs great and I enjoyed shooting it.
I have a mr556 that I cut the tab off and cut the barrel down to 14.5. It handles and feels vastly different and better by just losing two inches on the barrel.
Thing is you still have that heavy barrel under the handguard. While the original 416 is pretty thick there, the MR556 is even thicker. For me, i'd like the MR556A1 if it were either 1) cheaper or 2) more like the military original, but that's just my opinion.
Glad to see you also got a T91 stock set! Im a little suprised at how "flimsy" it feels but eh muh clone. Cant wait for my Norinco M311 clone to be done so I can have two chinese AR15s
Thanks much for watching. It doesn't really feel flimsy to me, at least no more so than say a Colt fiberlight CAR15 stock. Just another bit of polymer hehe
Most likely no, not unless a used one comes in the store. IMO, the CZ 805 Bren is superior to the SCAR 16S. As for the SCAR 17S, it is a neat rifle but by the time you pay for it + a few recommended upgrades to bring it up to its full potential, you are at over $4k.
Interesting, I respect your opinion although I disagree. IMO the MR556 is beyond not worth it as it is very far from the military HK416 while the SCAR 16 and 17 respectively are very close to their military counterpart. As for the Bren being superior? I'd have to disagree other than the price point. The SCAR is lighter, more proven to be extremely reliable after stupid-high round counts (not saying the 805 isn't reliable too, just not as proven), and I think the SCAR looks cooler....of course this is just my opinion.
We have hundreds of rounds through ours without the anti tilt buffer with no malfunctions. For what it's worth, I couldn't get any "cheap" ammo to work in mine with the anti-tilt buffer. According to Misha, the anti-tilt buffer being offered isn't original Taiwanese anyway. Maybe if you're shooting F/A but even with an Echo I had no issues with a standard buffer. -Jay
@@MishacoOBA thanks bro, I usually shoot thousands of rounds, not that this a pissing context, I just don't want to mess it up these are nice rifles. I see some saying its a must some saying its not problem, I'm leaning to its not a problem. I contacted Atlantic firearms to ask them on a email let their technical support handle it still nothing.
Taiwan Army will substitute new self-made XT-112 assault rifle for T91 rifle which are currently used by the troops. The new XT-112 assault rifle has a built-in reflective inner red dot and an advanced combat optical sight. Its effective and precise shooting distance reaches 1200 meters. It is an assault rifle with the world's longest distance in precise shooting currently.
Hey misha are you rich or something you always happen to have the weird rifles of my fantasies dude. That said I choose the t91 weight is important. Also the reliability ive read has been phenomenal plus this has been in service since 2003 vs the HK being slightly newer and not in wide spread service. I dont see why US army would waste money when a T91 is 1 cheaper to build and maintain and 2 utilizes more ar15 parts which we have massive surplus of. And 3rd it is a trusted platform ALREADY in service
It is a very reliable and very very accurate AR15 type rifle. Also nice machining and parts fitment. So I totally understand where you are coming from. This video is nothing more than our opinion and observations, also requested by some subs, cheers.
My Wolf A1 upper is one of my fave 16" uppers. It is VERY accurate and the recoil is only a LITTLE more than a regular DI AR upper. Its really cool with a binary.....very easy double taps
If you are in the market for a reasonably priced, quality made, arsenal built, piston upper you can’t beat the Wolf A1.
Thanks much for watching, and so far, so good with our 2 A1 rifles.
I just got a chance to shoot mine
yesterday, and am extremely disappointed.
The third round stuck in the chamber, the extractor ripping a chunk out of the rim.
Another empty had the rim with a slightly upturned lip, from the extractor.
Also, the bore has extremely rough spots in it, to the point of leaving "fur" from patches stuck to the rough spots.
Upon inspection, the chamber has blackened rough spots in it, like scabs.
On fired, and chambered but unfired cases, the shoulder as well as the head area exhibit bright rub marks, making me wonder if it has a short chamber or insufficient headspace.
Ammo was Norma Tactical and M-193.
Wolf upper is paired with KE Arms polymer lower and JP Silent Buffer System with Gen ll H2 weights.
Jess1344
@@jkharris488 the gun ships with syrup like anti rust "oil" that is very hard to clean . Treat the gun as it was shipped with cosmoline an fully clean and remove the oil. That is what the back scabs are and I would bet what us also in the barrle.
@@jkharris488 My A1 Barrel was completely trashed when I got it. It had two lines that ran straight down the length of the barrel and exhibited extreme copper fouling when I cleaned it out of the box (Left over from test firing, no doubt).
Great platform, but reach out to T91 tactical too see if they can set you up with a chrome lined BBL.
If not try "Tubb's Final Finish" ammo. That ammo works miracles on trashed barrels.
You, sir, are a wealth of knowledge. I would love to spend a day at the range w you just talking military arms. Thanks for all the content. You're a legend.
Misha
Congratulations on 10 years!
Its been 3 years since this video, in the fullness of time, do you still favor the T91 upper?
Thanks,
Jess1344
I absolutely love my Wolf A1 upper.
T65 and T65K2 have AR-18 style pistons. T86/91 have the newly designed pistons.
One thing that the Wolf A1 is cool for is with 22 lr conversion kits. I take the piston out and stick a CMMG Bravo in it and it eats whatever I throw at it. Taking the piston out means no nasty 22 crud dirtying up the gas system as opposed to a DI system getting stuff in the gas tube.
I am really liking my Wolf A1 myself.
So, bought a Wolf A1 Upper and it had a trashed barrel. But I loved the system so I went to T91 Tactical who set me up with a barrel, block, furniture, bayo and sling and.. I built it on a poverty pony lower with a BCM lower kit.
I got too say. It is a HELL of a gun. Even for the $$$ I got into it, it is a great platform. I don't think I would take an MR over what I got in my T91 clone.
I still can’t believe the MR556A1 doesn’t even come with the iconic H&K sights or quad rail anymore, not to mention the fact the barrel isn’t even chrome-lined.
Changing the barrel and carrier was a kick in the pants.
I also just recently discovered that they aren’t coming with the humpback H&K grips and instead Magpul grips. It’s like H&K wants to make it less and less like the HK416.
@@luger700 the more I look at the mr556 it makes me mad. HK has 30+ years of issues with straight up importing their guns to us as created, but if they’re going to do this make the rifle closer in Msrp price to the mcx virtus
@@luger700 What's even the point then?
@@lioncelica5170 That’s exactly my thought as well. When I spoke to H&K reps about it over the phone, they claimed they made the alterations due to “shooter demands”.
I've got a T91 12.5" upper on my "firearm" lower that's sitting within arm's reach, magazine full of IMI 77gr. My experience with the HK agrees with yours and Bartocci's. Just not an impressive firearm for the price. The HK sells for SCAR money and between those 2 I'll take the SCAR any day. But actually I chose neither. The T91 suits me fine.
So bring it on HK fanbois! I could use a good laugh.
I have been wanting to pick up a t91. This was a great comparison. I am working now on mating my ar stoner side charging upper with my adams arms piston setup. Just ordered an extra bcg to drill the charging handle handle hole. Haha. I will put a loose video up when done.
Jay has the 16.1" upper and I have the 14.5 (pinned FH). Both have been good for us. I like mine as its a bit lighter and shorter. Jay prefers his as it gives a little better range and accuracy.
10:40 BLOOP
Mish is just an amazing human being in all aspects. Great video as always.
T91 all the way. I would even choose a normal AR over the MR556. For that price you can buy/build a nice DI gun. Thanks Misha I always like seeing AR variants.
Thank you much for watching. Honestly, I think if HK had given us a real 416 upper on a semi-only lower (like Colt did with the LE6920 for example), I would have liked it a lot more. But for this video, i had to go with the gun sold on the US commercial market, and what we got was the MR556A1. Just as i went with the Wolf A1 upper, which is the civilian version of the T91 available to us also.
DI is completely obsolete. Get a piston rifle.
@@NorthernNorthdude91749 the biggest benefit of a piston is running suppressed without as much gas to the face. That's not a big deal to me, so it doesn't outweigh the fact that you're adding weight and more reciprocating mass to the front of the gun (which does alot to make it feel heavier than it is and adds to felt recoil), not to mention adds more moving parts (therefore more failure points).
After shooting many AR-types, I feel in love with the MR556 (for some odd reason named the MR223 here in the Netherlands, and I believe in most of Europe). It's so accurate that I can write with it at 100 yards. (And yes, that's with factory ammo.) The quality machining, zero tolerance fit and pins that can't accidentally come loose, I just love it. Quite the difference compared to the Diemaco C7 I had when I was in the reserve forces (not a bad rifle per se, but man she was well used to say the least...).
I have to be honest though: I've never shot a T91. Would love to, but I've never seen one on this side of the pond.
I get the preference for the T91 when both rifles are judged for 'common' military or self-defense purposes. You don't need a fast sports car when you're always stuck in traffic. In my opinion however, for any serious match shooter or perhaps also a special forces operator who wants/needs sub MOA accuracy (and who doesn't mind the bit of extra weight), the H&K is well worth the price.
You've probably guessed by now: I doubt the T91 could outperform the H&K when it comes to the H&K's sheer accuracy, but anybody who has different experience can correct me. I'm no H&K fanboy with blinders on, so I can take it. (Comments on my English are also welcome, by the way.)
Anyway, I really like your videos, MIsha. Maybe nice to know that you also have subscribers in the Netherlands. You really know what you're talking about and despite the fact that you generally provide us with lots of (great) info, you still manage to keep your videos interesting right up until the end. Keep 'm coming and keep up the good work!
i believe 5.56 nato ammunition is illegal to possess in some or all european countries.
I’m a native English speaker. My mother has taught English in nearly every grade and your English is fantastic.
For the average shooter, T91 works just fine. Most of us can't drop 2k on the hk but then again why when u can by 3 of T91. Unless u into some sub moa bullsjit, T91 will hold up to the hk all day. At the end of the day T91 will go bang the same way. Use the balance and pay off kids braces. NOW THATS real man, not a p...sy hk fan boy.
The problem with the HK is the upper by itself is a $2500-$3k upper. The wolf Upper can be had for $500-$600. Sure the wolf may not be as accurate as the HK but I’d be willing to bet the wolf is 100% just as reliable as the HK416/223 is. So for 1/5-1/6 the price I’d say any civilian would be much better off with the wolf.
German precision vs Chinese practicality...For the price, the Wolf upper (plus an 'anti-tilt' buffer, perhaps) wins all around for me! Does either gas system have adjustment settings?
Thanks much for watching, and no, neither has manual adjustments. I think for the HK you would have to replace the gas block. On the A1/T91 you may have to do this or might just be able to use a different regulator with more positions, not sure?
no we taiwanese arent chinese
Thank you for reminding me of the distinction. I have huge respect for Taiwan, and your determination to maintain your independence. I hope the West (and the US especially) continues to support you!
Pete Sheppard oh, thank you sooooo much !
@@petesheppard1709 It’s not only about independence. We really aren’t Chinese.
Both China should be gone.
Is the wolf A1 chrome linned the barrels are stated as hammer forget but nothing about chrome lining?
If cost is not a concern, I would prefer HK416 as my standard issue rifle, haha.
I had only shot T65K2 and T91in the military, no way for me to actually compare.
cost is always a concern. you're only paying for the name.
Love my Wolf a1 it sits on top of a Spikes tactical lower my favorite ar
For the Wolf A1 T91 16 inch, which buffer weight, spring, tube is optimal? Thanks.
H2 buffer with the t91 anti tilt buffer go to t91 tactical for t91 stuff
Imagine wolf putting out in upper that doesn’t feed steel ammo reliably.lol they would ruin their brand .
Personally, i think every gun should be able to feed brass & steel without any real issues.
If the gun built correctly they can feed and eject both reliably
@@danendraarkananta9442 That's not necessarily true for a 5.56 rifle. Steel cased ammo is very underpowered compared to military loads and steel doesn't function the same as brass inside the chamber. The only reason most ar's work with Wolf and the like, is most companies over gas their rifles specifically for that reason. If you have an adjustable gas block and properly tune it for M193 or M855 it won't run steel cased ammo reliably.
@@boomerisadog3899 thats why military M4's are overgassed and cheap carbine gas system AR 15 are overgassed
@@danendraarkananta9442 No, they are overgassed for reliability in adverse conditions.
Edit: The former refers to the military carbines.
Cheap ar's are overgassed so they'll run weak steel cased ammo reliably.
What sort of rail section fits on the top? I tried searching their website and all they have is the full m-lock handguard replacement. I am interested in just having a rail section on the top, but can't find any information anywhere.
T91 Tactical has a tri-rail piece that can mount to the handguard directly. It is just some short top and side rail sections, and it won't work for optics mounting. However, if you just need a light or some other simple fore end accessories it will work.
I just finished a T91 build, I mated the PSA magpul lower with it. I fell in love with the rifle! Only if I had the cash for that HK rifle. What’s the 3rd or 4th option to the HK?
A sig 516
Where did you get the Taiwanese furniture for the T91?
just google t91 parts and there is a website that sells them.
oh man those are pricey. I think a plane ticket to Taiwan is cheaper lol
T91 Tactical is where we sourced all of our build parts. The PG is only $20. The issue with the stock is you have to have the T91 buffer tube, which comes with the stock, end plate and a castle nut for $100. The folks at T91 were really helpful when building out our rifles so we can recommend them based on our experience. - Jay
Me thinks you stumbled upon the wrong site. T91Tactical has very decent prices for real military (not airsoft) parts. Hey, cheaper than Colt at least right? hehe
I'm trying to weigh if a 300 dollar plane ticket to the motherland would offset the cost of the finding the parts in country vs t91 tactical. They have a nice selection.
The H&K is a rich man’s piston AR.
The T91 is a poor man’s piston AR.
I bought the T91 upper and mated it with my Stag Arms lower receiver and it suits me just fine.
It performs great and I enjoyed shooting it.
This is a awesome video .more videos like this please and thank you great work patriot
Thanks much for watching, cheers.
Do you have any recommendations on aftermarket handguards for the T91?
I have a mr556 that I cut the tab off and cut the barrel down to 14.5. It handles and feels vastly different and better by just losing two inches on the barrel.
Thing is you still have that heavy barrel under the handguard. While the original 416 is pretty thick there, the MR556 is even thicker. For me, i'd like the MR556A1 if it were either 1) cheaper or 2) more like the military original, but that's just my opinion.
Glad to see you also got a T91 stock set! Im a little suprised at how "flimsy" it feels but eh muh clone. Cant wait for my Norinco M311 clone to be done so I can have two chinese AR15s
Thanks much for watching. It doesn't really feel flimsy to me, at least no more so than say a Colt fiberlight CAR15 stock. Just another bit of polymer hehe
t91 is not chinese.
Not clone and not Chinese uh?
@@veryinterestingpersonaliti8321 clone... yes Chinese....mmmmmm I don't think so
@@jack4683 how is it clone? looks?
Awesome!! thanks for the vid!
Will you ever do a video about the FN SCAR?
Most likely no, not unless a used one comes in the store. IMO, the CZ 805 Bren is superior to the SCAR 16S. As for the SCAR 17S, it is a neat rifle but by the time you pay for it + a few recommended upgrades to bring it up to its full potential, you are at over $4k.
Interesting, I respect your opinion although I disagree. IMO the MR556 is beyond not worth it as it is very far from the military HK416 while the SCAR 16 and 17 respectively are very close to their military counterpart. As for the Bren being superior? I'd have to disagree other than the price point. The SCAR is lighter, more proven to be extremely reliable after stupid-high round counts (not saying the 805 isn't reliable too, just not as proven), and I think the SCAR looks cooler....of course this is just my opinion.
@@user-vw5jk9cs8r The MR556A1 internals are identical to the 416 and that's what really matters.
Is the 14.5" barrel pinned and welded from the factory?
no
I’m getting worried about replacement parts for the t91
We've not had any issues getting them from T91 Tactical. Not saying those will always be available, but if you're concerned, stock up now. - Jay
I just can't get into upper/lower type arrangement. I'm a box and trunnion guy...
I am bireceiveral; i can swing both ways hehe.
finally, someone gets my humor! :)
don't get me started on long stroke vs short stroke, much less on DI pinching :))))
Oh trust me, i have no desire to get you onto stroking, be it long or short.
Don't be hitting on me! Kalashnikov is my only piston operated man and it will stay that way :)
OK, I admit it, I do have a crush on SIG SG 751 LB SAPR.... but only becasue I did not get a .308 Vepr when they were going for $600...
what is the depression in the bolt carrier for on the T91
Depression? sorry, not sure what you mean?
there is a little hole at the rear of the t91 bolt carrier.
is it necessary to have a anti tilt buffer?
Not at all.
@@MishacoOBA ok thanks but I have some people saying YES!!! but I really don't know, theres a website that said I absolutely need one or else etc etc
We have hundreds of rounds through ours without the anti tilt buffer with no malfunctions. For what it's worth, I couldn't get any "cheap" ammo to work in mine with the anti-tilt buffer. According to Misha, the anti-tilt buffer being offered isn't original Taiwanese anyway. Maybe if you're shooting F/A but even with an Echo I had no issues with a standard buffer. -Jay
@@MishacoOBA thanks bro, I usually shoot thousands of rounds, not that this a pissing context, I just don't want to mess it up these are nice rifles. I see some saying its a must some saying its not problem, I'm leaning to its not a problem. I contacted Atlantic firearms to ask them on a email let their technical support handle it still nothing.
Taiwan Army will substitute new self-made XT-112 assault rifle for T91 rifle which are currently used by the troops. The new XT-112 assault rifle has a built-in reflective inner red dot and an advanced combat optical sight. Its effective and precise shooting distance reaches 1200 meters. It is an assault rifle with the world's longest distance in precise shooting currently.
Hay guys ,t91 is batter then hk416 ,because t91 can shoot three round burst!
That’s what I was thinking 🤔
Hey misha are you rich or something you always happen to have the weird rifles of my fantasies dude. That said I choose the t91 weight is important. Also the reliability ive read has been phenomenal plus this has been in service since 2003 vs the HK being slightly newer and not in wide spread service. I dont see why US army would waste money when a T91 is 1 cheaper to build and maintain and 2 utilizes more ar15 parts which we have massive surplus of. And 3rd it is a trusted platform ALREADY in service
These T-91 uppers will be fun collectables after the Chinese invade Taiwan.
Gotta get that caracal rifle
Just doesn't much interest me. I go for military guns, or rather as close as I can get to them given the politics and laws of today.
Gotcha - are the receiver dimensions of the Wolf A1 the same as the MR556? Just wondering if the pic rail height is the same.
you need more light. video is too dark
u r awesome bro.
Wolf A1 HK is priced like a Rolex and those the same job So Wolf wins !!
t91 有三聯發
pepper胡椒 對 然後打靶時轉到三連發
左線預備 右線預備 開始射擊
然後就被班長幹爆了
三點發和全自動功能都依賴在下機匣，這裡的Wolf A1(也就是T91)只有上機匣，所以這樣比沒意義
@pepper胡椒 老外怎樣了?影片內容就只是在比兩把短行程活塞式步槍阿，怎麼罵人了?
請問老外評比結果是覺得T91設計比HK-416好?
@@許淼鈊 用起來差不多，但T91便宜多了
I’ll stick with my hk thanks!
It is a very reliable and very very accurate AR15 type rifle. Also nice machining and parts fitment. So I totally understand where you are coming from. This video is nothing more than our opinion and observations, also requested by some subs, cheers.
im taiwanese and i prefer german