people were modding ten inch vinyls coz there were no Serato 7s but with the culture of portablism growing i guess there will be more. I would love someone to make proper little 7 inch dj turntables.It would be great fun and would save alot of space with a little mixer
Hey what cables are you using for the serato 7 inch...My serato 7inch is not reading.....it doesn't have the clear circle....mine is fuzzy like..i try tuning it....but it doesn't work...thanks
is there a loss in audio quality with these portable faders? the audio out from my stokyo kutter gives a much lower output than connecting directly to my laptop or phone.
Hello I have a pts1 scratch and a technics 1210 plus a 2 channel sound card and a iPad with a Mixfader with the camera attachment.....the question is how can I set the technics 1210 up on mixfader can it be done and if so how and what will I need???
Mojaxx, you mentioned dvs in the video. you were able to route the line signal from the pto1 to a deck in sersto but you also said that running time code would need mods. im a little confused. Could you explain what is going on? I'm not as familiar with dvs as i am with the digital side of things
MrGoodbye23 With the PT01 USB it's straightforward, as in the video. With the PT01 Scratch, however, you can't get the control signal fed back in before the built-in scratch switch and speaker (without mods) - hence you'll need an external fader and speaker.
MojaxxVDJ hypothetically, could I control 1 deck with the pto1 scratch, but have a midi controller control the mixer in the software and cut with that? the audio would then run from the computer to speakers.
MrGoodbye23 If you have a Serato controller with a line level input and the DVS plugin, that would work fine. Just like plugging a regular turntable into your controller.
HELP MEEEEEEE!!!!!!!! If i buy the mk1 pt01 usb, slipmatt, vinyl and a fader is that everything i need for a working set-up? i do like the new pt-01 but would like to be using a traditional fader
chris ultrabeat Assuming you have a phone for beats, the only other thing you'll need is a speaker to plug the output of the fader into, unless you just want to use headphones.
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch switch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch switch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
Evan Saenz As Ritchie Ruftone demonstrates clearly here, the stock needles are... ok. They do the job. Yes, upgrading the cart is desirable, and will be part of a discussion of mods generally in a future video.
Brilliant stuff man. Definitely keep it coming with these videos if you can. I've got the kuttin donuts slipmat and it's perfect. Thinking about the new pt01 scratch but it is easy enough to switch the fader like you have?
Techmical You can set the switch to 'on' and then just remove it, and stick any fader over the top... BUT I'm seeing some possible options to plug into the deck directly instead coming soon, so hold tight.
MojaxxVDJ cheers for the info, I'll stick with my pt01 usb and jddx2r until then. Doesn't seem to be a huge portablism scene in the UK. I'm going to start uploading videos soon 👍
Numarks PT-01 is compact and light... You count the add-ons and it's expensive.. it's a belt drive so it won't hold blends longer than 8 seconds.. for the total price of a fully loaded PT-01 you can get a direct drive TT. Yes it cuts well. No it won't blend well. Thanks for the video.
hi, ive bought the kutter and its dope but ive already got a second one asa replacement and it has static noise issues while using it?? is there a way to work that out and use it normaly?? pls advise 🙏🏻
I totally agree... A quartz direct drive moter on a 7" aluminum platter.. not that's the best of both worlds. We've been needing that for 2 decades now..
IDK man, not to diss anyone or and please don't take this the wrong way. but can't we keep serato out of portable 7inch djing? can we keep a little essence in djing? I mean how heavy 7 inch records be to lug around? I mean at least with DVS djs are keeping turntables,slipmats,and needles alive.sorry I'm just a purist. peace to all djs no matter what you use.
Jonathan Villalobos I don't actually think it's a huge part of the movement, but people have asked about it so I wanted to fill them in on how it hooks up. In general I think most portablists are enjoying all these dope 7" battle records coming out.
Jonathan Villalobos I will definitely be sticking to my 7" vinyl. I think homie is correct when he says that the majority of portablists are staying true with only a few doing the Traktor setups. Especially now more and more 7" are being pressed. in the beginning I had cut down a few 12's with a hot knife and sand paper to clean the edges. I like the deep groves "anti skip" that most are incorporating these days like practice yo cuts. great album and you can definitely feel the difference
I'm excited I've been a fan watching forever but I suck on decks with loads to learn and for less than $300 US, I get a throw away practice set....talk about training wheels for everyone. I'm sold and in bro!
If anyone want to do 7"record for scratching hit me up. In north America needs to get up on the portable game,I've been dj ing since 95,we need step it fuck up,
if I knew how to code, I'd put together an iPhone app for just that purpose. maybe the whole audio interface would be built into a crossfader, so you could just plug in the fader and use timecode vinyl and beats from the iPhone through just one cable. a regular interface with 2 ins and 4 outs is cheap as fuck and pretty much readily available, this would add like $5 to the total cost of the xfader. am I the only one fucking with T H E V I S I O N ?
great vid. I've been looking at getting this for a while now since the Raiden fader stays out of stock a lot.
people were modding ten inch vinyls coz there were no Serato 7s but with the culture of portablism growing i guess there will be more. I would love someone to make proper little 7 inch dj turntables.It would be great fun and would save alot of space with a little mixer
Hey what cables are you using for the serato 7 inch...My serato 7inch is not reading.....it doesn't have the clear circle....mine is fuzzy like..i try tuning it....but it doesn't work...thanks
Props on all the sick coverage and reviews!
great breakdown - need to bust out my vestax (RIP) and add one of these little faders
Where can I get djcity gear? (hats, stickers, etc)
So for around 200-250 bucks you can get yourself into portablism. That's awesome!
Does the Numark needle eat up the wax?
Thank you in advance
How can I focus on portablism when you have a Masterpiece Edition Sunstorm transformer there in the back...
Lovin' the concept! thinking of purchasing numark PT01 scratch, what's the difference with the PT01 usb? as am planning to buy a separate fader?
Is there a way round for right handed scratch DJs
is there a loss in audio quality with these portable faders? the audio out from my stokyo kutter gives a much lower output than connecting directly to my laptop or phone.
How do you remove the stock fader on the PT01 in order to mount a third-party fader? Dope video BTW, keep them coming! Big up from CA(lifornia).
stop619 The 2 machine screws, pop out, and unclip the wire harness.
Hello I have a pts1 scratch and a technics 1210 plus a 2 channel sound card and a iPad with a Mixfader with the camera attachment.....the question is how can I set the technics 1210 up on mixfader can it be done and if so how and what will I need???
"Portablism is something different" well said
Mojaxx, you mentioned dvs in the video. you were able to route the line signal from the pto1 to a deck in sersto but you also said that running time code would need mods. im a little confused. Could you explain what is going on? I'm not as familiar with dvs as i am with the digital side of things
MrGoodbye23 With the PT01 USB it's straightforward, as in the video.
With the PT01 Scratch, however, you can't get the control signal fed back in before the built-in scratch switch and speaker (without mods) - hence you'll need an external fader and speaker.
MojaxxVDJ hypothetically, could I control 1 deck with the pto1 scratch, but have a midi controller control the mixer in the software and cut with that? the audio would then run from the computer to speakers.
MrGoodbye23 If you have a Serato controller with a line level input and the DVS plugin, that would work fine. Just like plugging a regular turntable into your controller.
does this equiapment
work on Traktor?
yes here's a quick demo using with my z2 and kutter fader instagram.com/p/BLaEFUTAN36/?taken-by=deejayollie
Mad Respect on the video!
Michael Rulentlez awesome
HELP MEEEEEEE!!!!!!!!
If i buy the mk1 pt01 usb, slipmatt, vinyl and a fader is that everything i need for a working set-up?
i do like the new pt-01 but would like to be using a traditional fader
chris ultrabeat Assuming you have a phone for beats, the only other thing you'll need is a speaker to plug the output of the fader into, unless you just want to use headphones.
Can you please explain why it is not possible to get DVS signal out from PT-01 Scratch without modding?
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch switch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
Andrey Zhiltsov You can get it OUT, but you can't get it back IN again before the scratch switch and speaker. So you'll need to add those externally - using it for DVS basically turns it into a regular PT01 USB.
what about stylus MOJAXX? Is the GT standard stylus from Numark good enough? Or, does a modification need to be done to get a shure/ortofon on there?
Evan Saenz As Ritchie Ruftone demonstrates clearly here, the stock needles are... ok. They do the job.
Yes, upgrading the cart is desirable, and will be part of a discussion of mods generally in a future video.
Brilliant stuff man. Definitely keep it coming with these videos if you can. I've got the kuttin donuts slipmat and it's perfect. Thinking about the new pt01 scratch but it is easy enough to switch the fader like you have?
Techmical You can set the switch to 'on' and then just remove it, and stick any fader over the top... BUT I'm seeing some possible options to plug into the deck directly instead coming soon, so hold tight.
MojaxxVDJ cheers for the info, I'll stick with my pt01 usb and jddx2r until then. Doesn't seem to be a huge portablism scene in the UK. I'm going to start uploading videos soon 👍
Numarks PT-01 is compact and light... You count the add-ons and it's expensive.. it's a belt drive so it won't hold blends longer than 8 seconds.. for the total price of a fully loaded PT-01 you can get a direct drive TT. Yes it cuts well. No it won't blend well. Thanks for the video.
hi, ive bought the kutter and its dope but ive already got a second one asa replacement and it has static noise issues while using it?? is there a way to work that out and use it normaly?? pls advise 🙏🏻
I have the same issue. Did you find any solution?
@@tomejovanoski5627 not really, I'm not using it any more :(
I need to go diggin’ for all dem rekids! 😂
is the pt01 out yet?
Aron mitchelle The PT01 Scratch should be readily available now, yes.
+MojaxxVDJ cheers
Someone needs to get on manufacturing some legit 7" turntables.
I totally agree... A quartz direct drive moter on a 7" aluminum platter.. not that's the best of both worlds. We've been needing that for 2 decades now..
Captain of the Matrix sl-700s
The time is ripe for SL1200-resistant 7'' and 3'' tablism. Let's fund it!
Thank you!
Awesome video
Can anyone tell me if the Numark PT 01 USB Portable turntable works with Traktor?
Let me know in this comment please
Thanks!
aTastyRabbit If you have Traktor hardware which supports DVS, sure. You'll just need to cut down or buy a cut down Traktor control record.
MojaxxVDJ thanks for reply!!
@aTastyRabbit Here's a quick demo of me using it with traktor and my f1 instagram.com/p/BKi4g8Zgo7B/?taken-by=deejayollie
good stuff mojaxx.....
IDK man, not to diss anyone or and please don't take this the wrong way. but can't we keep serato out of portable 7inch djing? can we keep a little essence in djing? I mean how heavy 7 inch records be to lug around? I mean at least with DVS djs are keeping turntables,slipmats,and needles alive.sorry I'm just a purist. peace to all djs no matter what you use.
Jonathan Villalobos I don't actually think it's a huge part of the movement, but people have asked about it so I wanted to fill them in on how it hooks up. In general I think most portablists are enjoying all these dope 7" battle records coming out.
Jonathan Villalobos I will definitely be sticking to my 7" vinyl. I think homie is correct when he says that the majority of portablists are staying true with only a few doing the Traktor setups. Especially now more and more 7" are being pressed. in the beginning I had cut down a few 12's with a hot knife and sand paper to clean the edges. I like the deep groves "anti skip" that most are incorporating these days like practice yo cuts. great album and you can definitely feel the difference
I'm excited I've been a fan watching forever but I suck on decks with loads to learn and for less than $300 US, I get a throw away practice set....talk about training wheels for everyone. I'm sold and in bro!
Agreed. Though we are using various digital mediums for beats.
If anyone want to do 7"record for scratching hit me up. In north America needs to get up on the portable game,I've been dj ing since 95,we need step it fuck up,
Красота.
if I knew how to code, I'd put together an iPhone app for just that purpose. maybe the whole audio interface would be built into a crossfader, so you could just plug in the fader and use timecode vinyl and beats from the iPhone through just one cable. a regular interface with 2 ins and 4 outs is cheap as fuck and pretty much readily available, this would add like $5 to the total cost of the xfader.
am I the only one fucking with T H E V I S I O N ?
there are magnums on eBay i got 2 for 70$ :)
586 records!
Cool but arrogant