Removing Headlight Assembly From The ZX10R

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 13

  • @robmuhfacka5986
    @robmuhfacka5986 Год назад

    This was the most instructional video on how to remove those lol especially the front cowl. The first time i removed my fairings i did it backwards i thought the nose cowl had to come off last!

    • @ModdingAddiction
      @ModdingAddiction  Год назад +1

      That’s the same thing I did when I pulled it apart the first time haha.

  • @RealFreeGary
    @RealFreeGary 2 года назад

    I have a crack in my fairing near my mirror and was about to take the whole front fairing off to do the repair. This was much simpler! Thanks!

  • @413_RYDER
    @413_RYDER 6 лет назад +6

    There should of been 2 Phillip's screws on the inside for the nose fairing removal as well.

    • @jontaylove25
      @jontaylove25 5 лет назад +1

      Definitely was almost broke my farings until I found the Phillips holding it together

    • @andyodab
      @andyodab 4 года назад +1

      Yup mate, there's a Phillip's head screw on each side above/behind the headlights that hold the top, middle section fairing that need to be removed. You'll be there a long time if you don't remove these huh lol

    • @RealFreeGary
      @RealFreeGary 2 года назад

      Found them. On the inside just below the edges of the tachometer. Thnx for the heads up

  • @liu3kang
    @liu3kang 4 года назад +1

    Fourth gen Ninja?

  • @faint442008
    @faint442008 4 года назад

    I'd rather just pay someone than take the entire front end off for a couple headlight bulbs

    • @ModdingAddiction
      @ModdingAddiction  4 года назад

      The head light bulbs are cheap and you don’t have to take the front clip off for that. This is to remove the front headlights to bake and paint them. Well beyond the realm of just changing light bulbs

  • @slickwilly6868
    @slickwilly6868 4 года назад

    Didnt show the finished product. Fail!!!