If you're still monitoring this video can you tell me what the model# of the pump is? I'm working on a machine that appears to have too much water flow. Because while making ice, some of the water flowing down the plate is overflowing out the sides between the ice plate and the curtain causing some water to run down over the ice below. Looks to me like the pump is too big so I need a correct model number (or amps/watts) for the pump. Thanks!
@@TechnicalVlogPH Thanks for trying to help! Maybe I didn't explain correctly. The sump is not overflowing. There seems to be too much water to pass through between the curtain and the ice plate at the lowest level of travel before entering back into the water trough so it splashes out of the sides of the curtain/plate, more on the right than the left but the trough itself is not overflowing. The water level sensor is working properly.
Una kasi problema noon sir nag tuloy tuloy ang supply ng tubig tapos inayos Namin kunti Yong water sensor sa ilalim Yun naging o. K na nag automatic na tapos kinabukasan nawalan na ulit ng water supply cheneck nmin Yong supply ng tubig Yong hose may tubig nman malakas kaso sir pag dating ng solenoid valve coil walang 220 volts supply na pumapasok nsa 40 volts to 60 volts Lang tapos 220 volts supply nya
Sir good day magkano Po kaya Ang bord Ng manitowok ice machine? For Incase need to change the board. Sometimes not working good the machine. Thanks a lot for answering.
Viruses are measured in nanometers. Bacteria are larger and measured in microns (3 to 10 in size). Our best commercial air filters MERV 8 only filter at best down to 3 microns. Those masks don't do anything. We won't wear them in USA because we know they are a fake solution. UV lights in the units and outdoor sunshine are the only things that work on a mass scale. Why the masks? Good video but the masks make it hard to understand your words. I've been to the PH twice and I love the people there, but those masks are silly.
Hi Sir, hindi na nagpapump ang water pump itong Manitowoc ice machine namin, gusto ko lang masigurado kung sira na. Paano ba diagnose? Meron pa bang ibang parts na sira kung bakit di gumagana water pump? Thanks in advance.
Sir ano kaya posible sira yung ice maker manitowoc din gumagawa nman cya ng ice pero if matapos na cya gumawa wala ng water supply na pumapasok..ok nman ang water supply dito
@@TechnicalVlogPH sir itong compressor terminal sir nga S R C o U V W.. PAG tini test ko ground to terminal nya shorted ung reading. Normal ba un grounded ang compressor
No clue what you said, but exactly what we needed thanks!
Ang galing mo kaibigan katech.salamat sa tutorial mo
About ice cube maker.saludo ako sa iyo kabayan
Sir, nice Vid po ulit, ayos yang ice machine na iyan sir ah, keep on sharing po sir, marami po kayong natutulungan. God bless sir at ingat palagi.
Maraming salamat boss, God bless din sa inyo.
If you're still monitoring this video can you tell me what the model# of the pump is? I'm working on a machine that appears to have too much water flow. Because while making ice, some of the water flowing down the plate is overflowing out the sides between the ice plate and the curtain causing some water to run down over the ice below. Looks to me like the pump is too big so I need a correct model number (or amps/watts) for the pump. Thanks!
If the pump still working no need to replace, just check the water level sensor
@@TechnicalVlogPH Thanks for trying to help! Maybe I didn't explain correctly. The sump is not overflowing. There seems to be too much water to pass through between the curtain and the ice plate at the lowest level of travel before entering back into the water trough so it splashes out of the sides of the curtain/plate, more on the right than the left but the trough itself is not overflowing. The water level sensor is working properly.
Hello My ice machine: Manitowoc serie 450 stops after throwing ice three times. Then i have to restart the machine.
Please check bin switch, or check condenser
Sir nghome service po ba kyo ng ref
Sir yung pump motor ba ng ganyan nare repair pa pag ayaw gumana? Nirekta ko kasi sa outlet wala response eh
Mas maganda palit bago na sir, mahirap irepair
Do you have to force the pump free. I couldn't get one free today. Will I damage something if I force it free
Yes you need a little force to remove this pump
Sir ano problema pag walang supply na pumupunta sa solenoid ng water supply inlet? Ty
Hindi po ba grounded water sensor?
Bago na Yong water sensor sir
Pero nong hinawakan ko Yong pinaka pin sa ilalim ng water sensor sir parang na ground ako kunti pero sandali lang
Ano PA kyang cause noon sir di kya board na?
Una kasi problema noon sir nag tuloy tuloy ang supply ng tubig tapos inayos Namin kunti Yong water sensor sa ilalim Yun naging o. K na nag automatic na tapos kinabukasan nawalan na ulit ng water supply cheneck nmin Yong supply ng tubig Yong hose may tubig nman malakas kaso sir pag dating ng solenoid valve coil walang 220 volts supply na pumapasok nsa 40 volts to 60 volts Lang tapos 220 volts supply nya
Sir good day magkano Po kaya Ang bord Ng manitowok ice machine? For Incase need to change the board. Sometimes not working good the machine. Thanks a lot for answering.
Dito po ba yan sa pinas sir? Pagkaka alam ko pag kay technolux ka bibili lagpas 30k yan kung hindi ako nagkakamali
Idol ask ko lang Po Yung nababaklas propeller ng water pump Nyan.
Thanks
Anong tanong mo sir? Pakiulit po d malinaw
@@TechnicalVlogPH ask ko lang Po,kung Yung propeller ng water pump na yan is nababaklas Po?
Ahh oo sir nababaklas yan pero hindi nman yan madalas masira
@@TechnicalVlogPH paano Po? Sana Po sir next vlog nyo Yung mga remedy sa parts.☺️
Thank you.
Sa mga mga ganyang parts ng manitowoc sobrang bihira lang masira ng pump minsan nasusunog, pero lagi kami nagpapalit ng bago para iwas back job
The water runs continuously, how can you tell if it's the pump or prob ?
You mean the water supply continous from inlet valve?
@@TechnicalVlogPH yes
Check your water level probe maybe open
@@TechnicalVlogPH how can you tell if its open ?
Are you technician? Us multimeter my friend
Hello vro. Paano e diagnose pag may error
Long freeze sa manitowoc ice machine? Iy series cube techran
Nag build up yung ice sa ice molding nya.
Thank you so much guys for watching 👌
Viruses are measured in nanometers. Bacteria are larger and measured in microns (3 to 10 in size). Our best commercial air filters MERV 8 only filter at best down to 3 microns. Those masks don't do anything. We won't wear them in USA because we know they are a fake solution. UV lights in the units and outdoor sunshine are the only things that work on a mass scale. Why the masks? Good video but the masks make it hard to understand your words. I've been to the PH twice and I love the people there, but those masks are silly.
Hi Sir, hindi na nagpapump ang water pump itong Manitowoc ice machine namin, gusto ko lang masigurado kung sira na. Paano ba diagnose? Meron pa bang ibang parts na sira kung bakit di gumagana water pump? Thanks in advance.
Ang supply sir ng watee pump is galing sa board pwde mo masukatan kung may lumabas na supply mula sa board
Sir ano kaya posible sira yung ice maker manitowoc din gumagawa nman cya ng ice pero if matapos na cya gumawa wala ng water supply na pumapasok..ok nman ang water supply dito
Indigo model din ba yan boss? Check mo water level baka grounded lang
@@TechnicalVlogPH hindi ko pa kabisado sir oo indigo model to if may fb ka sir pd ho bang mahingi if ok lng sayo
San ba location mo boss? Pm moko sa Protech hot and cold boss sa facebook
@@TechnicalVlogPH sa khobar din ako boss bagong dating lng ako dito 15 days pa
Aha jan din ako boss dati, anong company mo?
Kabayan ano kayaprobkema itong ice namin d2 sa comodation namin yung program niya China ataw gumana
Ano pong china ataw?
Hello po ano po prob kapag d lumalamig at di nag haharvest ng ice ung ice machine?
Check the refrigeranant charge 21st kung sakto
Sir ano yng nagiging sira ng water pump ng ice maker
Stuck up lang po madalas
Sir anuh kadahilanan ng machine pag eh switch on.nag trip ung breaker
May grounded yan sir,
@@TechnicalVlogPH mayron kbang idea sir bakit nag ka ground...
Madami pong sources ang pwde panggalingan ng grounded or shorted
@@TechnicalVlogPH sir itong compressor terminal sir nga S R C o U V W.. PAG tini test ko ground to terminal nya shorted ung reading. Normal ba un grounded ang compressor
Grounded na po yan
May papagawa ak0 sir MANITOWOC BRAND..sira yung fun nya sa likud di iikut..
San po location nyo sir?
Sir pag oprate ng board
My import kna ksama...
Haha dalawa kasamang import
Manitowoc din
Fa...... Amigo