Install Plug for Trailer Lights [Step by Step]
HTML-код
- Опубликовано: 13 сен 2024
- What's better than fixing your trailer? A spare car key without leaving home! I started Tom's Key Company (tomskey.com/?u...) so you can get quick and affordable DIY spare car keys and fobs shipped to your front door.
Installing a plug for trailer lights can be done with a little work and some basic tools. Pick up a universal trailer wiring harness on Amazon USA: amzn.to/2KOsRJ8
Amazon Canada: amzn.to/381Y58A
Amazon UK: amzn.to/2X0Gzei
(affiliate links)
For vehicles that did not come with a hitch but have had one added, having a wiring harness is essential so you can safely tow a trailer. Be careful to only tow trailers and loads appropriate for your vehicle. A car, minivan, or small SUV will have very different towing capacities from a large truck. This video demonstrates on a 2016 Toyota Sienna. Wiring will be similar for many other vehicles.
Multimeter electric tester:
Amazon USA: amzn.to/3htyc4B
Amazon Canada: amzn.to/37XSeRw
Amazon UK: amzn.to/2L9fzH3
This installation took several hours between removing trim panels, fishing wire through hidden spots, etc. One area that time could be saved is not figuring out which existing vehicle wires work the brakes and turn signals. That would avoid needing to splice wires. Rather, there are kits available that have plugs already configured specific for your vehicle and essentially avoid the splice. Check out the CURT brand kits - it costs a bit extra, but saves quite a bit of time.
Much faster - use a vehicle specific CURT 4-pin trailer wiring harness kit
Amazon USA: amzn.to/2L5DRlg
Amazon Canada: amzn.to/3rExWEl
Amazon UK: amzn.to/2WUD74W
#WiringHarness #TrailerLights #TrailerPlug
.348
Quick note - yellow is left signal/brake
Green is right signal/brake
Brown is marker lights (running/tail lights)
And white is ground
Thank you!
Good info thanks
Thanks
You're welcome
Thank you sir,,,,
No running lights?
Question where do I run my wire for the running lights so I can have running light for dark
Same problem I am having now. Did you find a solution? I'm thinking I might need to run new wires to the battery with a switch...
That’s what the brown wire is for
@@MakinMoneyISeasy I have the same problem
i’m stuck on the part where the Turn Signals and Brake Lights use the same wire cause if i wire the brakes and turn signals into the same plug on the trailer light connector, the brake lights will flash with the signals
Did you ever figure it out, currently having this problem
To much too fast to traierer.dont care about care