Customer Drops Off 2017 Yz250f Says Bike Is Hard To Start After Riding 10 Min
HTML-код
- Опубликовано: 13 сен 2024
- @getitingearcycles South Florida vibes #getitingear #veetouch #theveetouch #security #south #florida #southflorida #culture #vibes #customer #yamaha #yz250f #world #worldwide #bike #bikes
YOU SHOULD DO A PART 2 OF EACH VIDEO WITH UNKNOWN PROBLEMS SO WE CAN LEARN TO LOOK FOR THE SIGNS OF A PROBLEM
Then he’d be out of business
Bro you make Florida safe, do more for these people then the police ever could. Sorry I went down there a few times and all my friends from there told me it’s fucking terrifying, but if you look at the bike community man it’s awesome
Sounds like cylinder rings. When the bike warms up and the metal case bends thru the heat it loses its compression and when it cools down the metal goes back into its shape where it hase some compression again
Or valves
Sounds like cylinder rings. When the bike warms up and the metal case bends thru the heat it loses its compression and when it cools down the metal goes back into its shape where it has some compression again.
I’d check rad fluid first. Fluid good, check rad fan, Clear debris, still overheating prob needs top end done. Buddy bought a hogie.
@@johnathanbishop3038 metal goes bigger when hot and smaller when cold
I can relate to his fustraction just got my first bike and been working more in it then ridding it.
welcome to the life brotha lol
Low compression when hot....rings....it'd be my guess. Much love Vee
I have this same issue on my 2020 yz250f. A lot of people have said it’s a clutch drag issue from the showroom floor that the 2017+ models all get. People suggest a Henson clutch pack. It helped me turning the idle up abit but it’s a pain when it won’t start when hot in boggy woods and then the battery dies. No kickstart either
Valves out of adjustment. Its having the same symptoms as a carburetored bike, running good on a cold start and then dying when warmed up.
had same problem with my bike was the carburetor
It’s Fuel injected
Valve adjustment,timing issue. Motor is fine it starts right up. Sounds strong!!lol
why post the video and not show result.......
sounds like valves too tight 🤷🏽♂️
What's the first thing you gonna check? the Valves? Then a compression test once hot ?
Don’t push start your shit, that’s probably why it’s having trouble starting. Bump starting isn’t good
I never push started it before I attempted only twice to see if it would turn over.
Doesn’t hurt the bike at all
What was the problem with the bike? I had the same problem on my 09 yz250f before it was stolen in live oak florida
Same
Valves not seating when hot maybe?
Take the gas cap off and put it back it it starts and runs fine check gas cap vent
I would say ignition coil. My bike yz450f had the same problem when it was warm. I had to wait til it cooled down a little bit and then it would fire up. But I could ride mine for a long distance and then it would be nice and hot and then I would try to restart it and it would start. But like I said let it cool down a few and it would fire over
150k subs🙌
That bike has been neglected and beaten
My bike has the same problem… someone now what i need to do?
Well did the vee touch do the trick bro ??
What did it end up being?
Vee I need you man
Probably only bike not stolen you've worked on
Haha 😂
Cus he’s white huh ?
Probably the only racist nyga watching like you Ken and Karen’s do. You Caucasian love watching us. Your ancestors stole everything in life to achieve the American dream so it’s only right you blame us to not feel guilty about it. The very land beneath your feet was stolen from us. Should have sat quietly bubba jr. before commenting
Bro said this cus he’s white 😹😹😹😹
Rich mixture
Shims
That may be the carb
It’s fuel injected
😂😂🤦🏾♂️
Sounds like the tire pressuse
Shim it see if that helps
First
sure you are good mechanic white boy need mechanic or need friends?
The legend of XX18LIKE.Uno snowquen's is my idol. Hes the person I aspireu to be, hes my light of day ..QQQQ