I usually just guess at it lol, but then you can clearly see I'm not too picky on my junk. I will eventually get my shop set up how i want and start working on more precise things.
@@rodneysrepurposingrecyclin3821 thanks Rodney. I love being able to share what I make on here. I get a great sense of satisfaction watching it back. As soon as I get back from Barbados I'll be working on my 1st paid promotion for Bosch 😁
This is not the center of the road bar, this is the radius of the rod that must coincide with the axis of your drill! Let's be precise if we want to be right!
I wish I had a Mill and Drill press . I only have hand tools files hand drills cold chisels punches . Math and a soapstone and I can drill center holes . Great Video Just takes me a hour to get the 2 holes lined up lol
@@MakeItMetal , You just keep doing what you're doing , your video was great , I tell my Brother we need this and that , but we never get it . drill press is on the list . some of the things I fix . I have to take to a shop .
Sweet build I'm going to have to steal this as a young one who can't do math i have spent countless nights figuring how to do this. I don't think of obvious awnsers. I make things difficult then either i don't have the tools or the knowledge. So this is a great one!
Next time just take that Star Trek Lapel Pin and stick it to your chest and call Data 😉 Jk, that's awesome. Awesome job and thanks for sharing your knowledge.
@@MakeItMetal you can get sanding discs for angle grinders but I do use a bench disc sander myself. You can get Rob to cast you a plate for a disc sander. Mine I got out of my grandfather's garage but I made a new frame for it. I wish I had a picture of how he had it. It was pretty rough. I have mechanical drawing sharpeners with sand paper inside of them. I also have a sanding board for pencils too. I have a thing for drafting and art supplies.
The new pencil sharpener ought to look like a little beaver eating your pencils, with a flat tail to keep him standing, it'd be cute. There are some weird thoughts when I read that back to myself. heh heh. I thought it was a Star Trek badge at first but then continued to watch. 13 inches of snow. This morning and tomorrow morning down to -15C which is NOT normal for this area. The melting and refreezing is going to cause me problems for getting out but I have groceries, who cares?! Slight warm-up coming. Eventually.
@@MakeItMetal I think most would be inspired if someone stated they remind them of Moe. Even your hand movements. Not to distract from your brilliant DIY videos, but would you think of adding some sound effects from the 3 Stooges? The crying possibly was one. Dude that would be the bomb. I landed here to find a center finder for tubing and got distracted, what is that about?
Awesome idea brother,thanks man..💪👊👊
No problem 👍
I usually just guess at it lol, but then you can clearly see I'm not too picky on my junk. I will eventually get my shop set up how i want and start working on more precise things.
I used to guess it all the time Rodney..I could have bought one of these for £5 off of eBay lol..but where's the fun in that 😁
@@MakeItMetal i hear that, i appreciate the entertainment from ya making it.
@@rodneysrepurposingrecyclin3821 thanks Rodney. I love being able to share what I make on here. I get a great sense of satisfaction watching it back. As soon as I get back from Barbados I'll be working on my 1st paid promotion for Bosch 😁
Nice build mate. Takes away the guess work.
Yup...you can buy for £5 on eBay though lol..I'm so tight eh 😛👍
This is not the center of the road bar, this is the radius of the rod that must coincide with the axis of your drill!
Let's be precise if we want to be right!
Thank you for your comment and correction. Thanks for your input.
Definitely worth to think about making one for myself. Bloddy Awsome Buddy
£5 on ebay lol
Very interesting 👍
Glad you think so!
Good information thank you
Glad it was helpful!
Amazing tool Jason. Love the finger dancing and the girlie Ouch call. Brillant camera positioning again. Cheers mate
Thanks Andy. The girlie ouch ? I thought I edited that out? Oh dear! Lol
That solves the problem nicely! Not sure about the bit of clunge haunting the vice though!🤣
Lol..the bit of clunge is about to get a metal make over 😁
@@MakeItMetal looking forward to seeing that mate!
I wish I had a Mill and Drill press . I only have hand tools files hand drills cold chisels punches . Math and a soapstone and I can drill center holes . Great Video Just takes me a hour to get the 2 holes lined up lol
Hi JC..ive been lucky buddy, my mill came out of a dumpster and a lot of my other tools have been bought cheap.
@@MakeItMetal , You just keep doing what you're doing , your video was great , I tell my Brother we need this and that , but we never get it . drill press is on the list . some of the things I fix . I have to take to a shop .
Sweet build I'm going to have to steal this as a young one who can't do math i have spent countless nights figuring how to do this. I don't think of obvious awnsers. I make things difficult then either i don't have the tools or the knowledge. So this is a great one!
Help yourself Josh. I struggled with finding centers all the time till I had my 1st one of these. 👍
Close enough Mate!!☺
It'll get the job done mate 😁
Next time just take that Star Trek Lapel Pin and stick it to your chest and call Data 😉
Jk, that's awesome. Awesome job and thanks for sharing your knowledge.
Oh and for sharpening pencils you can't beat a disc sander.
That's true Paul...so I guess I need to build a disc sander next then eh lol
@@MakeItMetal you can get sanding discs for angle grinders but I do use a bench disc sander myself. You can get Rob to cast you a plate for a disc sander. Mine I got out of my grandfather's garage but I made a new frame for it. I wish I had a picture of how he had it. It was pretty rough. I have mechanical drawing sharpeners with sand paper inside of them. I also have a sanding board for pencils too. I have a thing for drafting and art supplies.
Perfect alignment. Great Job!
Thanks John. 👍
Awesome job on that mate! Can we have a finger drum roll? Lol!
Lol..thanks Pat 👍
muito bom um abraço vindo daqui do Brasil pra você irmão , tank you..
Thank you Cleber
sweet tool
Thanks Corey 👍
Much more interesting than what I do :-)
Hell no it isn't! Your skills are awesome! Thanks for watching Terry 👍
Wowzers I need that in my life LOL good job Jay. I want to make a oil waste burner for all my oil change oil. Any ideas lol ?
Lol..actually Jason..I have an idea..needs a .8mm welding tip and a bit of pressurised oil...👍
What was that blue tool in the check called, I need one of these great thing to have good job.
Looks like a lathe cutter to me.
Paul is exactly right..I used a lathe tool to cut the center groove. 👍
The new pencil sharpener ought to look like a little beaver eating your pencils, with a flat tail to keep him standing, it'd be cute. There are some weird thoughts when I read that back to myself. heh heh. I thought it was a Star Trek badge at first but then continued to watch.
13 inches of snow. This morning and tomorrow morning down to -15C which is NOT normal for this area. The melting and refreezing is going to cause me problems for getting out but I have groceries, who cares?! Slight warm-up coming. Eventually.
Very clever jason
Delightful...but why a woman’s groin on the workbench 😂
Well spotted Ross.. she's a future art project 😛
During the beginning and at: 1:38, your crying reminds me of Moe in the 3 Stooges, thumbs up. When are you showing the DIY pencil sharpener video?
It's coming soon...DIY pencil sharpener lathe....thanks for the inspiration Bobcatt 😁👍
@@MakeItMetal I think most would be inspired if someone stated they remind them of Moe. Even your hand movements. Not to distract from your brilliant DIY videos, but would you think of adding some sound effects from the 3 Stooges? The crying possibly was one. Dude that would be the bomb. I landed here to find a center finder for tubing and got distracted, what is that about?
REMARKABLE!!! :>)>
you stirred your coffee backwards unless this vid was produced down under
I'm going to watch this video again...not like me to stir my coffee backwards! well spotted though lol
omg..you are right!
I'll buy one of these off of you if you promise to put the money towards gloves to go with your angle grinder.
Lindo Serviço ...
Obrigado meu amigo
Ouch was that corner hot Jason?!? :-)
Damn hot Howard! Lol
Step one, buy a mill
This mill came out of a skip..Step one, rebuild broken mill :)
Brian Cranston looks strange.
Clever !
You stole this From Robert Nurden !
I’m telling dad!
Wait till you see my waste oil burner smelter then 😁👍lol
jason andrews i thought it was a rice cooker !😂