I really appreciate you guys doing cool things like this that no one else does (or doesn't film it) just because you can. Keep it up 👍. Also very cool you give props to Roland and let him share a little knowledge.
Another great video Max, Roland's so happy rebuilding engines a true genius, well done to Shawn as well the bike sounds great, I think you're on to another winner Max, looking forward to next one.
They are entertaining to watch for sure, look cool, fun to see them stack up between the 3 bikes. Most badass simply not these bikes would be super dysfunctional. They would be years away from most badass at the point they started designing their own frames and started r&d with current top level riders to get all engine angles, engine heights, torque distribution weighted out correctly to balance the bikes in the air vs ground performance, followed by rake / trail vs engine angles for cornering speeds etc, the list goes on and on and testing w changes are even longer. These bikes would not compete with older 500s w/simple updated suspensions on professional level. Fun yes, look cool yes. They should stop comparing them on tracks because at pro levels they are more likely to kill someone, these would really appeal for like sand drags.
Good one max and you def getting better a kicking them over lol. Rolands the man when it comes to spanners and shauns an all round legend. Top marks bro 👍😎
Hi max 😊😊 its been a while buddy great vlog video i think Graham rolls Noyce would be great choice for ride on track ive been fan of his since 1974 have great day to 😊😊😊
Its a shame you aren't into trail riding/hard enduro. Get a supertrax shock, cones valves and see if you can get graham jarvis or Billy bolt to give it a real rip!
I'd love to see brc do a kit for the new TBI bikes too I'm getting a 24 KTM 300 SX and it would be sweet to make that thing a 500 the tbi is definitely way better imo then tpi will ever will run as good it's just got to much going on and they are way to lean I hope that flash tune/500 kit actually gives the thing some balls all the tpi bikes I have ridden run like garbage and turn the cylinder into junk if you don't let them idle and warm up
I built an 03 yz250f and the last gear on the trans had the hub offset slightly to one side. I put it in wrong and cracked the case. Having built a ktm as well i prefer that lol.
It's a shame BRC use cheap diaphragm actuated power valves! But I guess there is a limit to how much people will pay for these kits and they are expensive already. Cool looking bike in black!
Has the 300 cases been modified to accommodate the larger crank and cylinder or are they specifically fabricated cases ? If so the 300 isn't technically being converted to a 500 is it lol
They are custom cases by brc, but use the gearbox, clutch, starter, waterpump,etc from the 300. The kit is a work of art, The video shows you the full build. Thanks for watching.
@@999lazer yeah it's a bit of a hybrid between the craftsmanship of the cases and the 300 gearbox etc as you said, love the content mate awesome quality editing etc too! 👍 will subscribe for sure
@@bikebreak4523 Not sure what a used "KTM group" 300 goes for nor the BRC kit because I forget the details but I wanna say this hybrid can cost anywhere from 14k to 20k dollars just depends mostly on a good used donor?....ain't nothing cheap no more but maybe someone busted their 300 engine and the bike goes cheaper. Either way buku bucks for a bit more oomph.
You guys are bringing back 500s one build at a time! Got to love it.
we're trying :) thanks for watching
I love watching Roland work his magic 😀
Thanks Mark, He such a good guy and knows his way around a 2 stroke for sure. Thanks for watching
@@999lazer Shaun is great on the tools too. 😀
Now you just need to weld a couple of those puppies together and we’re all done! 😁
haha, you never know ;)
@@999lazer tease 😁
@@999lazer get those frenchies to do it
@@999lazer wicked man 23 gas gas BRC 509 on my channel elec 6 spd haha it’s impressive
Brilliant Max 👍🏻 Look forward to part 2 ✊🏼🍻
Just wait when the guys at BRC comes out with that Yamaha R6 - 2 stroke conversion kit! :p
It's a husky... Billy Bolt, where you at? Nice job, y'all. That thing's awesome.
Billy can have a ride if he wants to :)
@@999lazer make it happen
Roland is like a 2 stroke wizard proper clever bloke
He know his stuff for sure. we really appreciate the time he gives us with our projects.
Roland is a magician!
Sounds awesome and great video.
Thanks Kevin :)
@@999lazer Your welcome Max.
I could sit here n watch Roland for hours, had my bike tuned by him n it was night and day difference would recommend him to anyone with a yz 😎👍
Roland is a gem, a 2stroke master! Another rocket in your stable max! Kids n motor bikes 😜👍
its going to be fun when we roll, the YZilla, Megalodon and Kong out together :) Thanks for watching andy
@9:20, love the comment. Pleasingly different from the 'tighten the bolts in a crisscross pattern' that we've all heard said a millions times.
I'm exited for this one, keep em coming man. You're getting better with each video!
Thanks Rambo
Once again Roland working his magic, love watching the videos after a days graft. Keep the videos coming 👍🏻
Cheers Dave, appreciate the comment :)
I really appreciate you guys doing cool things like this that no one else does (or doesn't film it) just because you can. Keep it up 👍. Also very cool you give props to Roland and let him share a little knowledge.
Thanks for watching, appreciate your comment :)
Awesome channel and fantastic builds
Thanks Ragnar, You know we appreciate that you watch every video :)
Still something very special about 2t engines 👍🙂
Awesome! Canadians and Britts making the motto world a better place! Braap!
haha we sure are trying :) thanks for watching
Amazing video I knew it was going to be worth the wait awesome build Max.
Thanks Max, glad you enjoyed it :)
You guys have the coolest projects.
Thank you. We always do our best :)
This is the way
She's ALIVE ❤🤘
Roland made building that engine look easy! Very good mechanic 👍🏻
Now I need one of these
Can't wait to see both the brc 500's you've built on the track at the same time!
coming soon... :)
I love the sound
I can’t stand adverts enough to watch the whole video but I caught the end nice job well done
Roland is a wizard and Sean is a good all rounder you can’t go wrong with good people around you so looking forward to everything you turn out👍🏻
I’d love to live close to that mechanic. It’s nice to have a master working on your bike
Another great video Max, Roland's so happy rebuilding engines a true genius, well done to Shawn as well the bike sounds great, I think you're on to another winner Max, looking forward to next one.
Cheers Kevin. We have some awesome things planned with this bike :)
No excuse now, gotta get Billy Bolt on it see what he can do with a 500
Looks so beautiful
Thanks Luke
The bike that everyone wants! ✊
Fantastic FOOTAGE 😮 roland knows his Strokers 🤘🙏🇬🇧⚡counter balanced =very posh,looks bulletproof
Thanks Ian
Can’t wait to see it in action!
Now thats a stroker , well done
great stuff love your builds cant wait to see that beast go👍
This is amazing
You guys make the most badass bikes that you can. Love the videos. Keep em coming. You Guys Rock!!!!
Thanks :)
They are entertaining to watch for sure, look cool, fun to see them stack up between the 3 bikes. Most badass simply not these bikes would be super dysfunctional. They would be years away from most badass at the point they started designing their own frames and started r&d with current top level riders to get all engine angles, engine heights, torque distribution weighted out correctly to balance the bikes in the air vs ground performance, followed by rake / trail vs engine angles for cornering speeds etc, the list goes on and on and testing w changes are even longer. These bikes would not compete with older 500s w/simple updated suspensions on professional level. Fun yes, look cool yes. They should stop comparing them on tracks because at pro levels they are more likely to kill someone, these would really appeal for like sand drags.
This is just epic Max🎉🎉🎉
Thanks Brian
Love your videos and put them together I mean the bike it will be a meshing I can see the point in this ❤😂
Another amazing project!
Thank you
Got to say, you’ve got a sickness, a smoker sickness, Love it 👌🏻😜
haha, you could say that :)
@@999lazer good keep it up 👍🏻😎
Based off what I’ve seen this should be Roland’s channel
I love it when a plan comes together! Ka-Bing!
Might be nice to get one of those hot batteries or that starter mod kit. or both :)
Good one max and you def getting better a kicking them over lol.
Rolands the man when it comes to spanners and shauns an all round legend. Top marks bro 👍😎
Great vlogg max, can’t wait to see it Racing the megladon and YZilla
Thanks, you know that's coming :)
sounds great man
Thanks Arthur
TSP nice!
Shout-out from south africa:)
Good job...
Enjoy ur vids😊
"Everything tallys nicely" love it
Brilliant mate
Thanks Marc
let Kaplan motorcycles know-he like that -Kaplan America channel
Brilliant 500 series max, do you reckon you may get some old 500s to match? Old husky and a yz490?
Yes we will try for sure, thanks for watching
Love that!
Sounds nice man
Thanks Lee
Dope sick af
Awesome 👌
Thanks Dean
The thing is going to be crazy. Ever ridden a maico 700?
Just curious how much it weighed as a 300 as compared to the 500 kit after it was installed?
Nice one
I want one....
Hi max 😊😊 its been a while buddy great vlog video i think Graham rolls Noyce would be great choice for ride on track ive been fan of his since 1974 have great day to 😊😊😊
Its a shame you aren't into trail riding/hard enduro. Get a supertrax shock, cones valves and see if you can get graham jarvis or Billy bolt to give it a real rip!
Why would you put electric start on it the hole point is to keep it light 5 pounds is tremendous not to mention 15
Sounds like it wants an *inertial starter!*
yoyoyoy
🔥
Needs a li-xx maybe 3s hv lipo or reg 4s. Possibly 18v or 24v starting circuit.
sounds the mutts but how much s it? i nearly fell over when i looked at the BRC site and can only assume its in yen
Max, you should see if you can get Billy bolt to ride it, seen as it's a husky
I'd love to see brc do a kit for the new TBI bikes too I'm getting a 24 KTM 300 SX and it would be sweet to make that thing a 500 the tbi is definitely way better imo then tpi will ever will run as good it's just got to much going on and they are way to lean I hope that flash tune/500 kit actually gives the thing some balls all the tpi bikes I have ridden run like garbage and turn the cylinder into junk if you don't let them idle and warm up
Stayed tuned Koy, as BRC have made a TBI kit for this conversion which is the next stage of the build :)
One question please, the engine is from a ktm 300; but the new cylinder wich kind of brand is?
I built an 03 yz250f and the last gear on the trans had the hub offset slightly to one side. I put it in wrong and cracked the case. Having built a ktm as well i prefer that lol.
Now to race your 3 monsters
I want one
Don't you need to pressurize the fuel tank via a fuel pump for fuel injection? Did I miss that? Or is it just gravity fed??
I bet it feels like a Cadillac
Make another “for those who think motocross is easy” 🤠
Does Putoline still make the best chainlube ever in the tin that you have to heat up ???
Sounds just like a CR500 to me.
I believe it uses a CR500 piston, so it would have a matching bore and stroke, so it would sound similar.
Now do a video ripping it :D
thats next :)
@@999lazer good to hear, im waiting for it!
Sounds like a KX500
It's a shame BRC use cheap diaphragm actuated power valves! But I guess there is a limit to how much people will pay for these kits and they are expensive already. Cool looking bike in black!
In next video will see it it in Dyno!!! 60 hp i think in wheel 🤔
Has the 300 cases been modified to accommodate the larger crank and cylinder or are they specifically fabricated cases ? If so the 300 isn't technically being converted to a 500 is it lol
They are custom cases by brc, but use the gearbox, clutch, starter, waterpump,etc from the 300. The kit is a work of art, The video shows you the full build. Thanks for watching.
@@999lazer yeah it's a bit of a hybrid between the craftsmanship of the cases and the 300 gearbox etc as you said, love the content mate awesome quality editing etc too! 👍 will subscribe for sure
@@bikebreak4523 Not sure what a used "KTM group" 300 goes for nor the BRC kit because I forget the details but I wanna say this hybrid can cost anywhere from 14k to 20k dollars just depends mostly on a good used donor?....ain't nothing cheap no more but maybe someone busted their 300 engine and the bike goes cheaper. Either way buku bucks for a bit more oomph.
wish you used a CR500 engine and had a REAL monster!
why are you not driveing ingmove champ??
Ooh hell yea fuel injections. Be careful out there cause if you race these folks kong may just smash your bike
That's a proper way to kickstart a beast. Choke, top dead center and throw my bodyweight on top of the kicker. Never fails.
For much moor Power, you need a bigger throttlebody! I think your bike have not more as 60or 65hp.... Schöne Grüße aus Deutschland!
🥺🥺🥺👍
now make it supermoto
23:25 thank me later
Ok God Job Well Done!
But These Engines Still Dirty!!
Find A Solution For That Problem!!!
For the record this isn't the first time a Fuel Injection has been put on a 500cc two stroke.
How much for kit
Nearly $8K
why building something that is allready on stock by others WAY cheaper. others have even 700cc
I’ll buy it for 20k
With a yamaha you wouldn't need to split it in the first place cuz it wouldnt blow up at 50 hours LOL.
8:16 yeah that dont seem right. You gonna heat a bearing up to pull the crank through?? What you talkin bout?
It's good to see mental illness is still alive.