I think it's funny that out of all the gripes I'm seeing, the ONLY response I saw was regarding a question about what drill they used. WOOOOOOW!!! LOL!
Love your product Proline. Body looks Amazing. When it first came out, I immediatly ordered one at my hobbyshop. Aldo it was on their site, it was a backorder...apparently the body still had to be released by you guys. After waiting several month, and still no view on when it would arrive...I asked to switch to a clear Raptor body as I couldn’t continue with my old body. Couldn’t help it feeling let down by Proline and my hobbyshop. Non de less, you guys make awesome products, and we love it.
Thought it might be something new new. Already did the xmaxx. I’m just finishing masking up my monster fusion body for a fresh 4 color paint job along w/ 2.8 trenchers on my old slash 4*4. Love your products.
Just fitted a set of the springs all round (also have the PL reservoirs). I used the firmest red springs top and bottom but I find the top red spring a bit soft. When my X-maxx is loaded up with batteries (unlike this video) the top red spring is always compressed. Is this right?
Hi Aubameyang, Depending on your specific setup and weight, the stiffest upper springs will partially compress or become fully compressed at ride height. This transition point may seem a little early, but it provides full stability when reaching top speeds. Also with this configuration taking sharp turns will extend the upper spring completely on the inside shocks, this keeps your tires closer to the ground and lowers the chance of rolling. If the upper spring was any stiffer, then the transition to the lower spring would be too late, resulting in a it significantly less stable configuration that would be similar to a single rate setup. So yes, your set up is perfectly normal. *Also the shocks in this video were not filled or tuned and were only used as display for this demonstration.* We hope this answers your question. Thanks for your interest and support!
Hi Mj James, Song: Extra Fresh Artist: Birocratic We're glad you enjoyed the video! Be sure to subscribe for more awesome content. Thanks for your interest and support!
Great video love the music and your products are awesome but my Xmaxx will not be sporting a Ford or for that matter a Chevrolet anything!! Much prefer the stock body with a nice Tbone exocage on top!! I did order your prolines :) 👍🤛👌
hey guys, great videos and nice work. can you make a video with new Traxxas UDR? what kind of dampers and springs would you recommend? Where can I get your products in Germany?
Nice video. I just installed my new Pro-Line shocks and Reservoir. Is there supposed to be play on the top of the shock Tower or is that normal? Shock slides side to side?
Hi @Jimmy Rodriguez, Yes, this is intended . There should be a bit of play side to side on these caps. We hope this answers your question, Thanks for your interest and support!
Hi Snowleopard 1256, No need to replace the hex. Our Impulse Pro-Loc Wheels are a bolt on/plug'n'play upgrade! We hope this answers your question. Thanks for your interest and support!
What springs do you guys find work the best? And also what weight oil? Right now I’m running the red tender spring and yellow main spring with 50 wt oil. Jumps are nice but I’m getting very slow rebound from the shocks, should i go back to 30wt? Thanks
if you are hitting big jumps a lot then you will definitely want to run the stiffer springs, we also offer an upgraded spring kit here: www.prolineracing.com/performance-parts/dual-rate-spring-assortment-x-maxx.asp as for the rebound speed of your shocks, you can go with lighter oil or modify the hole size in the piston inside the shock to allow fluid through at a higher rate.
+Pro-Line Racing thank you for the fast response.. I am running your springs..that was the colors I listed earlier.. do you guys have a combo preference? I know it’s personal preference but I’m just curious. Thank you
+Pro-Line Racing ok I think the winning combo for me is red little springs front and back and green big springs front and yellow big springs in the rear with 50wt oil to help with leaks and drill the pistons next size up.👍🏻 thanks for the advice
Hi @Anthony Arnold, We use a Makita DF010D drill that features an adjustable clutch. I think this model has been discontinued, but you might be able to find it from 3rd party sellers on Amazon. Thank you for your support!
Hi @Andre Membrido, We use a Makita DF010D drill that features an adjustable clutch. I think this model has been discontinued, but you might be able to find it from 3rd party sellers on Amazon. Thank you for your support!
Hello Jose, here is a link to the Spring Rate chart so you can choose which setup best fits your driving style: www.prolineracing.com/images/Dual-Rate-Spring-Rates-Chart.jpg
The Cordless Hex Driver used in this video is the Makita DF012DSE, however I personally use the Hitachi DB3DL2 and it is about a third the cost, and unless you are using it every day with lots of abuse, the Makita is a bit overkill, but an awesome tool none-the-less.
Hi Pauly Malhi, Please refer to this video on our X-Maxx shock assembly for shock oil details👇⬇👇 ruclips.net/video/oGnBsKQ_lOU/видео.html Thanks for your interest and support!
Nice body @pro-line racing .. I always like proline products .. question I have is do you make a Raptor body with a red color scheme.. one for the red xmax 8s . Couldn't find it and I'm interested.. lmk
Hi BiGoOcH, Unfortunately we do not offer this body in a red pre-painted color scheme, but we do also offer this body clear for you to add your own custom paint job and color scheme. Pre-Cut 2017 Ford F-150 Raptor Clear Body for X-MAXX Product ID : 3482-17 You can contact your local hobby shop or visit an authorized Pro-Line dealer website, such as www.amainhobbies.com/ or www.horizonhobby.com/ to find the best deal on your Pro-Line RC products. Thank you for your interest and support!
If there is an issue with the Pro-Line product you have received, please contact customerservice@prolineracing.com or call (951) 849-9781. we stand by our product 100% and want to ensure that your experience with our product is a good one. Thank you!
Hi @Jaturapat Jeniamwit Prices for all of these upgrades can be found by clicking the product links located in the video description. You can also contact your local hobby shop or visit an authorized Pro-Line dealer website, such as www.amainhobbies.com/ or www.horizonhobby.com/ to find the best deal on your Pro-Line RC products. Thank you for your interest and support!
I agree, I've been waiting for Traxxas to release a true big motor truck. I love my Revo 3.3, but it has an O.S. 21tm. A gas version of the Xmaxx would be awesome, but Traxxas would price it so high, that it wouldn't make sense for them business wise. Traxxas is mainstream, they're bread n butter are rtr kits for new users, hobbyist that want parts and easy access everywhere and families looking to get into the hobby.
@@paulcrocker4553 They definitely would have to change the chassis out to be all metal, I would imagine, and could still use the same drive train, and maybe add a 2 speed trans to it! All wishfull thinking haha
@@funeralhymn666 the chassis would definitely need to be strengthened, especially the engine mount area. But considering Traxxas has never released a big block powered truck, I'm not holding my breath.
Hello K0ppit, good eye! in fact, the coupler can be run either way. in this position the transition to the secondary spring will happen sooner, in the opposite direction you can change the transition point to allow the primary spring to work longer.
If you're actually looking for the best build for bashing I'd recommend following this video. Maybe it's opinion, but I wouldn't say replacing the shocks (there's nothing wrong with the standard ones) and buying a fragile body is the way to go. ruclips.net/video/ZNF7LfkysaA/видео.html
at least when you spend that much on shocks this size you can tell what you are getting. Also if your riding lawn mower ever needed remote res shocks you would have a set to use. Hard to really show what 8x4" tires really look like in these videos until you see them at a hobby shop. Good thing i didnt spend $900 on an xmaxx and got a rustler 4x4 for only 400, then bought every part made for it for another easy 400. xmaxx would have been way to much lol
The weakest thing on the X maxx is the body. So many comments on the first run the bolts rip through the plastic. If you could build a thicker plastic 10x as durable, you might be onto something.
I'm trying t trade m x maxx 3.3 that is just only broke in it has fuel and lots of extras I'm looking for an rtg rtr jeep that's like 200$ no any one interested
Common now using a power tool for an allen wrench to take those small allen screws are for pussies i prefer to do everything manually. Too me that's little overkill.
the upgrades you did well you call him upgrade anyway none of them was actually beneficial they were all just cosmetic your selection of the tire you put on was not really all that great
what a waste of money the x-maxx is all you need stock if you don't abuse it it'll last forever and that stupid music I'm 1 minute 29 seconds in and I just had to cut it out
I still have a T-Maxx running the powerstroke shocks, I just clean them and service them every season. Still work great!
Basically throw more money at it lol
EXACTLY! LOL.
I think it's funny that out of all the gripes I'm seeing, the ONLY response I saw was regarding a question about what drill they used. WOOOOOOW!!! LOL!
0:25 Damn his cut fresh as hell
🤣🤣🤣
Looks good proline body
I like it
Love your product Proline. Body looks Amazing. When it first came out, I immediatly ordered one at my hobbyshop. Aldo it was on their site, it was a backorder...apparently the body still had to be released by you guys. After waiting several month, and still no view on when it would arrive...I asked to switch to a clear Raptor body as I couldn’t continue with my old body. Couldn’t help it feeling let down by Proline and my hobbyshop. Non de less, you guys make awesome products, and we love it.
Ya, now there are springs for the Xmaxx, can’t wait to get them
Awesome upgrades not to much just a couple items and looks great and the shocks probably changed handling a ton.....
Wow I just got my XMaxx and can’t wait to buy your upgrades in the near future. Then show it off on my RUclips channel. Thanks for sharing
Every single part you guys have made for the xmaxx. Recreate for the Maxx please 😁😁
We need some proline bodies for the Traxxas Maxx!
I plan on doing all 3 of these proline upgrades to my Xmaxx once the RC season is over so basically over the winter 😂🇨🇦👍
longboardguy I bet you don't even have an x max
video makes me want a X-MAXX
Now bash it and show us
Thought it might be something new new. Already did the xmaxx. I’m just finishing masking up my monster fusion body for a fresh 4 color paint job along w/ 2.8 trenchers on my old slash 4*4. Love your products.
I have the pro line tires but wish y'all would come out with a sliverado body 😁
Hi Xmaxx Fan,
Your wish has been granted!
www.prolineracing.com/bodies/2019-chevy-silverado-z71-trail-boss-clear-body-xmaxx.asp
Or Sierra Denali
Just fitted a set of the springs all round (also have the PL reservoirs). I used the firmest red springs top and bottom but I find the top red spring a bit soft. When my X-maxx is loaded up with batteries (unlike this video) the top red spring is always compressed.
Is this right?
Hi Aubameyang,
Depending on your specific setup and weight, the stiffest upper springs will partially compress or become fully compressed at ride height. This transition point may seem a little early, but it provides full stability when reaching top speeds. Also with this configuration taking sharp turns will extend the upper spring completely on the inside shocks, this keeps your tires closer to the ground and lowers the chance of rolling.
If the upper spring was any stiffer, then the transition to the lower spring would be too late, resulting in a it significantly less stable configuration that would be similar to a single rate setup.
So yes, your set up is perfectly normal.
*Also the shocks in this video were not filled or tuned and were only used as display for this demonstration.*
We hope this answers your question.
Thanks for your interest and support!
Great video that's why I've subed you because I think I can learn alot from you watching your channel Keep it going my freind 👊👌👍🤯🤯🤯
I the video was awesome. Great Upgrade! I love the music. What's the name of that music?
Hi Mj James,
Song: Extra Fresh
Artist: Birocratic
We're glad you enjoyed the video! Be sure to subscribe for more awesome content.
Thanks for your interest and support!
The xmaxx and all this upgrades and the baterys 2000 dolars.
Woooowww
Do one for the rustler!!!!!!!!
Wonderful support for very beautiful x maxx Goooood
Great video love the music and your products are awesome but my Xmaxx will not be sporting a Ford or for that matter a Chevrolet anything!! Much prefer the stock body with a nice Tbone exocage on top!! I did order your prolines :) 👍🤛👌
When are you guys making more color for the ford Raptor?? I wish it came in red with black....
There is a clear body available which you can paint by yourself ;-)
Great job
Hey what volt gun is that
Looks great
Can you guys do a ultimate build for the TRAXXAS Rustler
Any chance you will have similar setup for maxx
Tires are great though i wonder how long before they get cheapened up
Excellent video, but, the body swap is simply aesthetic.
Does that ford body have a tailgate warmer 🤪
hey guys,
great videos and nice work.
can you make a video with new Traxxas UDR?
what kind of dampers and springs would you recommend?
Where can I get your products in Germany?
Those shocks cost so much damn
5:19. Why isn’t there any dodge ram bodies? 😕 Would like to see one for the x maxx.
Scott Francis exactly
Nice video. I just installed my new Pro-Line shocks and Reservoir. Is there supposed to be play on the top of the shock Tower or is that normal? Shock slides side to side?
Hi @Jimmy Rodriguez,
Yes, this is intended . There should be a bit of play side to side on these caps.
We hope this answers your question,
Thanks for your interest and support!
Nice
Can you guys do dual rate springs for the Arrma kraton? Please guys I'd buy it immediately
Do the proline wheels come ready to put on or do you need to replace the hex?
Hi Snowleopard 1256,
No need to replace the hex. Our Impulse Pro-Loc Wheels are a bolt on/plug'n'play upgrade!
We hope this answers your question.
Thanks for your interest and support!
What springs do you guys find work the best? And also what weight oil? Right now I’m running the red tender spring and yellow main spring with 50 wt oil. Jumps are nice but I’m getting very slow rebound from the shocks, should i go back to 30wt? Thanks
if you are hitting big jumps a lot then you will definitely want to run the stiffer springs, we also offer an upgraded spring kit here:
www.prolineracing.com/performance-parts/dual-rate-spring-assortment-x-maxx.asp
as for the rebound speed of your shocks, you can go with lighter oil or modify the hole size in the piston inside the shock to allow fluid through at a higher rate.
+Pro-Line Racing thank you for the fast response.. I am running your springs..that was the colors I listed earlier.. do you guys have a combo preference? I know it’s personal preference but I’m just curious. Thank you
right now our setup is Red primaries (smaller black sping) and Green Secondaries.
+Pro-Line Racing ok I think the winning combo for me is red little springs front and back and green big springs front and yellow big springs in the rear with 50wt oil to help with leaks and drill the pistons next size up.👍🏻 thanks for the advice
Jeep jlu body, u made the gladiator now make the jeep jlu wrangler body in that tough material
Do you make any other bodies for the xmaxx that’s not a ford or Traxxas
Hi @Bruce Levall,
Yup!👍
Gladiator
ruclips.net/video/uIAcjDXY7A8/видео.html
Silverado
ruclips.net/video/dt4-oA-fRzg/видео.html
Accidentally put holes in the sling shots. Whooooops
Sweet. What drill are u using there
Hi @Anthony Arnold,
We use a Makita DF010D drill that features an adjustable clutch.
I think this model has been discontinued, but you might be able to find it from 3rd party sellers on Amazon.
Thank you for your support!
Hey I'll take that stock body and tires lol send um to me and I'll like and share everyday
what drill is that?
Hi @Andre Membrido,
We use a Makita DF010D drill that features an adjustable clutch.
I think this model has been discontinued, but you might be able to find it from 3rd party sellers on Amazon.
Thank you for your support!
Pro-Line Racing Thanks! Keep up the great videos.
What’s the set up on the brings?? You guys don’t say.... the springs comes with 3 difference colors....
Hello Jose, here is a link to the Spring Rate chart so you can choose which setup best fits your driving style:
www.prolineracing.com/images/Dual-Rate-Spring-Rates-Chart.jpg
What is the name of the powerdrill you used in this video
The Cordless Hex Driver used in this video is the Makita DF012DSE, however I personally use the Hitachi DB3DL2 and it is about a third the cost, and unless you are using it every day with lots of abuse, the Makita is a bit overkill, but an awesome tool none-the-less.
Did u use 40 wt shock oil or 50?
Hi Pauly Malhi,
Please refer to this video on our X-Maxx shock assembly for shock oil details👇⬇👇
ruclips.net/video/oGnBsKQ_lOU/видео.html
Thanks for your interest and support!
Nice body @pro-line racing .. I always like proline products .. question I have is do you make a Raptor body with a red color scheme.. one for the red xmax 8s . Couldn't find it and I'm interested.. lmk
Hi BiGoOcH,
Unfortunately we do not offer this body in a red pre-painted color scheme, but we do also offer this body clear for you to add your own custom paint job and color scheme.
Pre-Cut 2017 Ford F-150 Raptor Clear Body
for X-MAXX
Product ID : 3482-17
You can contact your local hobby shop or visit an authorized Pro-Line dealer website, such as www.amainhobbies.com/ or www.horizonhobby.com/ to find the best deal on your Pro-Line RC products.
Thank you for your interest and support!
Can some one let me know what size rim those are.
Hello Swampth1ng. Our Pro-Loc Wheels are 4.3".
where can i buy that driver tips? for drill
ebay
And what happened to your belted xmaxx tires?
Hi @Rc Baddie,
We have never offered belted tires for x-maxx.
your web site is hard to find things
Hi @Brian Smith,
All links for the products shown in this video can be found in the description.
Thanks for your interest and support!
What shock oil do I use?
Kason Schultz I'd just use whatever stock oil Traxxas uses
didn't answer his question
Im skeptical how the body is since every pro line ive bough cracks and is thin as shit burns through after 2 flipps
If there is an issue with the Pro-Line product you have received, please contact customerservice@prolineracing.com or call (951) 849-9781. we stand by our product 100% and want to ensure that your experience with our product is a good one. Thank you!
if im buyinga body im not going to buy the same body with a diffrent paint job -_- ima buy a russian unbreakable body:)
I could use those wheels. My two back wheels are flat.
how much for all upgrades?
Hi @Jaturapat Jeniamwit
Prices for all of these upgrades can be found by clicking the product links located in the video description.
You can also contact your local hobby shop or visit an authorized Pro-Line dealer website, such as www.amainhobbies.com/ or www.horizonhobby.com/ to find the best deal on your Pro-Line RC products.
Thank you for your interest and support!
almost as much as you paid for the car new
I just did the math and got around $530 for everything they showed (that's with a clear body)
Great video but i think i know why u upgraded it its a ford should put a chevy shell on it it would just go faster n work longer then lol
Wow, so not true
I wish I had a rc car
Wow that pre-printed body is already discontinued. Bummer.
I'll wait till Traxxas releases a GAS (or Nitro)powered version of this beast, Tired of electric...lol
I agree, I've been waiting for Traxxas to release a true big motor truck. I love my Revo 3.3, but it has an O.S. 21tm. A gas version of the Xmaxx would be awesome, but Traxxas would price it so high, that it wouldn't make sense for them business wise. Traxxas is mainstream, they're bread n butter are rtr kits for new users, hobbyist that want parts and easy access everywhere and families looking to get into the hobby.
@@paulcrocker4553 They definitely would have to change the chassis out to be all metal, I would imagine, and could still use the same drive train, and maybe add a 2 speed trans to it! All wishfull thinking haha
@@funeralhymn666 the chassis would definitely need to be strengthened, especially the engine mount area. But considering Traxxas has never released a big block powered truck, I'm not holding my breath.
@@paulcrocker4553 Very true, It'd still be nice as hell if they did, I'd buy one in a heart beat lol
Lower the price on the shocks
2:14 This can't be right? The spacer is upside down and prevents the helper spring from compressing.
Hello K0ppit, good eye! in fact, the coupler can be run either way. in this position the transition to the secondary spring will happen sooner, in the opposite direction you can change the transition point to allow the primary spring to work longer.
If you're actually looking for the best build for bashing I'd recommend following this video. Maybe it's opinion, but I wouldn't say replacing the shocks (there's nothing wrong with the standard ones) and buying a fragile body is the way to go.
ruclips.net/video/ZNF7LfkysaA/видео.html
More more more expensive :(
20ish years ago pro was the place to go for Tmaxx(nitro) but today not so much for Xmaxx or Maxx. Quality is way down. IMO
You guys should sponsor me and send me some tires for my xmaxx and I can unbox them on my RUclips channel
Stampede RC kid10 if you can afford the x max you can afford tires and wheels for it
Why so much for bodies
exactly, and they all look the same. Not worth what their asking. I'll wait till someone comes out with something different.
Music is horrendous
i wonder if anyone has followed this video to the teeth
at least when you spend that much on shocks this size you can tell what you are getting. Also if your riding lawn mower ever needed remote res shocks you would have a set to use. Hard to really show what 8x4" tires really look like in these videos until you see them at a hobby shop. Good thing i didnt spend $900 on an xmaxx and got a rustler 4x4 for only 400, then bought every part made for it for another easy 400. xmaxx would have been way to much lol
I don't have money to buy an rc car
I'm pretty sure none of these add any benefits . Stock X-maxx is the way to go Traxxas knows whats up
Revo lution the spur gear , pinion gear and esc is junk!
Agreed! Got mine two days before Christmas and already had to repair my pinion gear...
nahh.. its down to user, if you abuse it & break it then upgrade.. stock worked for me no problems.
@@kermit56780bs
Tires are too heavy
Now it is looking bad in the comparison of new.
The weakest thing on the X maxx is the body. So many comments on the first run the bolts rip through the plastic. If you could build a thicker plastic 10x as durable, you might be onto something.
Here ya go!
ruclips.net/video/qSK04J1VKa4/видео.html
Thanks for your interest and support!
Ok
I'm trying t trade m x maxx 3.3 that is just only broke in it has fuel and lots of extras I'm looking for an rtg rtr jeep that's like 200$ no any one interested
Sorry t maxx my bad
remove the stuuuuupid electro music and you have a great video
Rip pro-line racing xmaxx shocks... no more-_-
Common now using a power tool for an allen wrench to take those small allen screws are for pussies i prefer to do everything manually. Too me that's little overkill.
the body was a let down. no decals an the paint they used has flaked off.
You could buy a real used car for what this toy and upgrades cost lmao
the upgrades you did well you call him upgrade anyway none of them was actually beneficial they were all just cosmetic your selection of the tire you put on was not really all that great
The stock tires ballon up and blowout.. happen to me yesterday. On my second day of owning a xmaxx 8s
Tires look sweet but those rims are terrible! Should make them more aesthetically pleasing to the eye.
i hate the original body!
what a waste of money the x-maxx is all you need stock if you don't abuse it it'll last forever and that stupid music I'm 1 minute 29 seconds in and I just had to cut it out