Great high quality visual video!! Gives me a clear picture of what goes on so I don't have to go into AutoZone dumbfounded about what they do... Thank you very much for the awesome video!!
Very creative but my situation is a little different if have light groves no pulsation on the rotors could I smooth them out with just replacing pads with new semi metallic ones?
As with all machinery, the usage instructions should be followed very closely to limit any risk. For more information please check out our website www.bendpak.com/wheel-service/brake-lathes/ or call us at (800) 253-2363
hi sir, my rotors are somewhat new yet they need resurfacing. there is nothing shown visually. the question, can i keep the same brake pads after resurfacing my rotors since they have 60% life left in them? thanks
Lets say u charge $20 each rotor. About 4-8 rotors per day, maybe. How long would it take to pay for the machine? 20yrs? 15yrs? The machine will wear out before it starts to make a profit.
Based on the 4-8 per day, $20 each figure that you gave, and assuming a 5 day work week, it would take 4-6 months to cover the cost of the machine. Add in tooling + labor and whatever shipping and tax amounted to, and it takes a year to break even.
For sales in the United States, contact sales@bendpak.com or visit www.bendpak.com. For International sales please contact exports@bendpak.com. Thank you for your interest!
We do have several models available, for pricing and availability please visit: www.bendpak.com/wheel-service/brake-lathes/ or contact an authorized BendPak/Ranger distributor
I want someone to train me to use it and let me borrow it for a weekend. Do you think the guys at O'Reilly's have one of these along with proper training? LOL
We have several models available, for pricing and availability please visit: www.bendpak.com/wheel-service/brake-lathes/ or contact an authorized BendPak/Ranger distributor
I really want one even though I don't work in a garage. So satisfying!
Machine looks VERY impressive...but I’m even MORE impressed, by how you got all those nickels to balance like that?!? 🤯
AMAZING looking like brand new Rotors.
Great high quality visual video!! Gives me a clear picture of what goes on so I don't have to go into AutoZone dumbfounded about what they do... Thank you very much for the awesome video!!
Thats why I'm watching too! LOL
LOL
The music & the coin stunt is awesome!
This video is unusually satisfying !
This reminds me of the scene in Toy Story 2 where Woody gets fixed.
lmao
This video was soothing to watch
Saint-Saen Danse Macabre- great choice
Very creative but my situation is a little different if have light groves no pulsation on the rotors could I smooth them out with just replacing pads with new semi metallic ones?
Amazing machine. For a DIY person it’s perfect, only drawback is that it’s expensive.
Well this machine worth the high price tag. Great products come at a great price.
@@aurvaroy6670 Still not worth it the DIY. Nearly 10K, lol.
How much is the price for the break rotor polisher machine?
Гениальная реклама - браво! А зачем резиновая лента на диски и барабаны сверху надевается? против пищащего звука?
Спасибо за комплимент! Резиновая лента предназначена для уменьшения любых вибраций ротора или барабана.
Pretty slick...
Disc macabre.
Why can’t the The “hubless” rotor use the same adapter as the first rotor in the video? The only difference is the fixed lugs
Very nice machine
The music is "Danse Macabe", I song about skeletons dancing at the cemetery.
This is so satisfying🙂
love the machine!
does this machine resurface semi truck disc rotors? as well as the drums for the older semi trucks????
For complete specifications on sizing and rotor/drum capacities, please visit: www.bendpak.com/wheel-service/brake-lathes/rl-8500xlt/
How come no grinder?
I wanted to know if the operation can at some point represent a risk?
As with all machinery, the usage instructions should be followed very closely to limit any risk. For more information please check out our website www.bendpak.com/wheel-service/brake-lathes/ or call us at (800) 253-2363
beautiful
hi sir, my rotors are somewhat new yet they need resurfacing. there is nothing shown visually. the question, can i keep the same brake pads after resurfacing my rotors since they have 60% life left in them? thanks
That's a great question and we recommend contacting a local mechanic that would be better suited to look at your specific situation.
Recommend replacing pads just to be safe. If your rotor was running out of true before the resurface, the brake pads aren't going to do their job.
Elie Nehme Anytime you resurface or replace rotors buy new brAke pads
Could churn out some seriously large banded wheels with that i would think 😎
😢saan po mabibili blade pang reface ng rotor disc?
nice machines
what is the price for buying Brake Lathe -- Resurface Disc Rotors and Brake Drums with Ranger BendPak
Please check out this link for more information: www.bendpak.com/wheel-service/brake-lathes/
Tendrán las copas para rectificar tambores de tritón precio
While aisle in Walmart?
I need the who is de dealer in Miami, and how much it is?
Thanks for your interest! For more information on pricing and purchasing please visit our website www.bendpak.com or give us a call at (800) 253-2363.
Превосходно 🥳
Anybody here in 2021?
Straight business i like it
Awesome Machine!!!
Isn’t a rotor already on a lath ? Just put it in blocks and stick in in 3rd
amazing video
How much is it?
i loved this video
Where we can buy this machine ?
For purchase information visit www.bendpak.com or contact an authorized BendPak distributor. Thank you!
How do you know how much surface to cut.
You just know.
I want one!
Please tell us how can buy thise machine?
For purchase information please visit www.bendpak.com Thank you for your interest!
I prefer a Pro-Cut B17 bench lathe!
Why does he put a belt on the rotor ?
For vibrations
Lets say u charge $20 each rotor. About 4-8 rotors per day, maybe. How long would it take to pay for the machine? 20yrs? 15yrs? The machine will wear out before it starts to make a profit.
Based on the 4-8 per day, $20 each figure that you gave, and assuming a 5 day work week, it would take 4-6 months to cover the cost of the machine. Add in tooling + labor and whatever shipping and tax amounted to, and it takes a year to break even.
Please Santa can you fit this down the chimney?
where do u buy it machine..country?
For sales in the United States, contact sales@bendpak.com or visit www.bendpak.com. For International sales please contact exports@bendpak.com. Thank you for your interest!
كم السعر رجا مع التوصيل الى العراق..👍
Nice how much this machine
We do have several models available, for pricing and availability please visit: www.bendpak.com/wheel-service/brake-lathes/ or contact an authorized BendPak/Ranger distributor
Do i need to be certificate to operate this machine?
Great question! While we do not offer a certification course, some companies or local regulations may require a general certification.
@@BendPak thanks sr
How can i buy tis machine where can i find please reply i want your machine
Thank you for your interest! For purchase information, please visit: www.bendpak.com/wheel-service/brake-lathes/
How much is it? where do you buy it?
Thanks for your interest! For more information please visit our website at this link: www.bendpak.com/wheel-service/brake-lathes/
I don’t know why; the coin scene made me laugh
i want thish machine how mach
+decent cng works $5545.00:
plus shipping
One arm and three legs.
مافائده الشريط الذي يلتف على الهوب
لتقليل الاهتزازات و تقليل الضوضاء.
Reminds me of the movie tombstone
What is the model no. of this machine?
This is the Ranger RL8500 brake lathe, you can find more information here: www.bendpak.com/wheel-service/brake-lathes/
Is that why auto shops won't resurface my cross-drilled rotors, because of the bit that's used?
Villamor78 I’ve never seen anyone cut drilled/slotted rotors can’t be good for the bit.
I realize that now. I always imagined they used some sort of machine sanding method. Lol.
We don't ever use bits. Our rotors come out more true than factory. Gonna have a video soon for the safer more efficient way to do this
I want someone to train me to use it and let me borrow it for a weekend. Do you think the guys at O'Reilly's have one of these along with proper training? LOL
most O'Reilly Auto parts Stores have a lathe very similar to this on site
Hm? Po sir?
Price plz
We have several models available, for pricing and availability please visit: www.bendpak.com/wheel-service/brake-lathes/ or contact an authorized BendPak/Ranger distributor
Price
Thank you for your interest! Pricing can be found on our website www.bendpak.com
How much in india
Thank you for your interest! For more information please contact exports@bendpak.com
كم السعر
ما صناعتها
exports@bendpak.com للمزيد من المعلومات أرجو الأتصال
Je suis intéressé par une machine je peu savoir le prix merci
Pour plus d'informations sur les prix, veuillez contacter exports@bendpak.com
Not the nickels!
كيفه صيانت الماطور
👏👏👏
I would never put a re-cut brake disc on my car. I have had one shatter and it does a lot of damage to the brake caliper and locks up your wheel.
How much this tools
For pricing and more information please check out: www.bendpak.com/wheel-service/brake-lathes/ Thanks for your interest!
@@BendPakCan l know your last price and from lt will shipped .my regards.
Howmuch
For more information including pricing, please visit www.bendpak.com/wheel-service/brake-lathes/
تمن مع التوصيل
لمزيد من المعلومات ، يرجى الاتصال بـ
exports@bendpak.com
TLF yolla disk makina için
Brak disx cutgin masen hou mach us doller
love it
was OK but that MUSIC!!
كم سعره تلك الماكنة
www.bendpak.com/contact/
Hilo sar
hm
Would rather have had somebody talking then that music.
JAMES SMITH than*
Nice machine and well presented but what with the 70's porn music?
It's not "70's porn music", but rather Camile Saint-Saëns' "La Danse Macabre". I love it, but I concur it is too distracting.
Where have you seen porn with music like this o_o
Tyler Smith Hahaha!
на станке вал бьёт не хуёво))
Tf is this music
music is fucking dramatic.
Dudeeeee ever heard about minimum disc thickness? Do this in germany for your clients and your client can sue you for attempted murder :-)))))
Another video ruined by a needless music overlay.
Relax guys u are jst resurfacing discs , not making art.
the music is soo stupid i couldnt even watch the full video...
Horrible music.. Please stop destroying such a great video with this background music 😡.
Took off way to much material. I guarantee, that rotor is under spec now
Price please