This is not a regular DIY project for a regular person , it requires heavy duty machinery skills.otherwise a very sophisticated intellectual project though..
You are smart! Use your creativity to make and invent more and more productive gadgets and try to market and customize your gadgets for people who are like minded
Рулевое управление страшное! Можно голову разбить, если не научиться поворачивать на таком радиусе обратного рычага. И тормозной диск будет цепляться за всё... А так в общем самоделка хорошая. Молодец.
Great job. But, it would be cheaper and easier to buy one scooter, that would be more powerful, faster, more portable, with lights, water resistant and safer. But, for the beauty of doing this nice project, it is worthwhile doing it, congratulations.
That was super awesome, the only other thing I would do is maybe tidy up those wires, to prevent possible snagging also it would improve the appearance of a good looking and well designed scooter.
8:02 hi will you please discribe more about this rod dimention and cone set... i like your design i am also planning to build one i hv got all my components too.. Just not sure about the turning.. Please tell me about the road Dimention and where you get it from that will be a good help
U have really cool ideas and great editing. That being said man when stick welding tack them then run a beed. Circles, back n forth, up n down, straight, not touch then not touch then not gotta run those sticks down to the numbers man
Wait a moment. I just noticed something. Did you build your own welders hammer from scrap?? Just another bonus "nice work" for that as well as all the actual projects as subjects of your videos
great work man, but for batteries you may use same brand/model of 18650 batteries, its not safe to used different models or brand it may cause fire upon charging all together. be safe everyone.
Nice job, when I saw the title I was expecting a very basic build but you really went all out. How fast could the thing go when you were done and what was your range?
He has it floored now . Not fast , I bet the bats are already dead . But awsome build , with better batteries I'm sure it would go faster , last longer . This guys good
Awesome video, good editing skills n big respect for your creative building of the scooter..maybe bigger wheels would really make it suitable for serious off road machine with a bit more torque.
great work with the suspension, totally understandable the power, the fact it's from hoverboard. the plywood would not be a good base material, and you could've cover the wirings & spray painted the pieces after weld.
I want to ask, I've made the same one, but when the gas/ throttle is fully opened, the voltage drops down until to 32 volt...finally lvc / turns off, I've changed the controller, replaced the bms and the case still same, what's wrong ? please help me... is there a possible cell battery that is damaged? whereas before being assembled 18650 everything was checked at 4.1 volts. thanks,,,
Hi there I’ve just watched your video, I am doing the same thing for my school project, would you be kind enough to post a video with how and where the electronic wires are connected? Thank you.
Great work but it must weigh a ton (scrap bike frmae would be ideal and so much lighter) and I'm always amazed by how people don't work on the braking power !
This is unexpectedly high quality project and video. I mean come on, whenever you see a DIY video from India it's always some stupid dude just randomly welding some shit together like he will never have to disassemble it and also filming it all on 2007 phone. But this one is the opposite.
I have one problem with this and it's major I definitely agree with reusing battery cells but using cells of all different brands capacity and use this is very dangerous this is how 18650 cells are always exploding this man is very creative but needs to learn way more about battery safety and electronics in general
It looks offroad better then every scooter under 2000$ prize. And its now 2 years old, amazing work
This is not a regular DIY project for a regular person , it requires heavy duty machinery skills.otherwise a very sophisticated intellectual project though..
There was nothing regular about this lool
thank god no music. awesome weld technic.
Best part of this electric scooter is it suspension... Perfect for the Indian Road...
It should have a brush in the front to brush away the feces on the road as you ride.
Absolutely ingenious build in all aspects. I especially like the cantilever style front suspension ! Your mental energy is exemplary - CHEERS !
You are smart! Use your creativity to make and invent more and more productive gadgets and try to market and customize your gadgets for people who are like minded
جيد جداً ، ماشاء الله تبارك الرحمٰن فيك .
هذا الشغل " العقل البشري نعمه من الوهاب " فحافظ عليه ✌🏻😘🤳🏻
Excellent! Now you should tweak and tidy it up. Also, consider fabricating it in Aluminum.
I have taken a dream to became engineer from this guy
Awesome and simple….
Great job broth 👏👏👏
hello bro. You are the coolest engineer i ever seen. thumbs up very nice job.
Nicely done! All-wheel drive, too. I like the suspension.
I really like the rough look and the suspension system!
The MADMAXX scooter guy!! Very cool!
Рулевое управление страшное! Можно голову разбить, если не научиться поворачивать на таком радиусе обратного рычага. И тормозной диск будет цепляться за всё... А так в общем самоделка хорошая. Молодец.
Мне кажется массивный очень,вес наверно большой..
Good ... I made one anthor shape ... Its very awesome idea
Great 👍
RESPECT RESPECT RESPECT salu2 desde Almería España!!👍👌🍻
Mast hai bhai ek dum!!
Great job. But, it would be cheaper and easier to buy one scooter, that would be more powerful, faster, more portable, with lights, water resistant and safer. But, for the beauty of doing this nice project, it is worthwhile doing it, congratulations.
Awesome build!
Ride safe, mate.
Ingenious, though not fast at all... Use a sprocket at the back to give it longer legs.
Wow...super bro 👍👍👍outstanding
That was super awesome, the only other thing I would do is maybe tidy up those wires, to prevent possible snagging also it would improve the appearance of a good looking and well designed scooter.
ГЛАЗА-А-А-А-А-А-А-А-А!!!!!!1111
Man, you sure do like your tig welders....
Chai toh bandha hai bai ☕👍 great diy
Very nice build Sr.
Все как мы любим! Из говна и палок (сегодня из металлических)!
Сергей Макарцев я не один из русских смотрю его)
@@КириллКлиментьев-ы5у ты третий после меня )
8:02 hi will you please discribe more about this rod dimention and cone set... i like your design i am also planning to build one i hv got all my components too.. Just not sure about the turning.. Please tell me about the road Dimention and where you get it from that will be a good help
Too bad bro. He just likes comments and doesnt even bother to reply.
75 полуляхов из 200, это однозначно)))
Ok po yan kaya lang ung motor HUB din ang gulong so hinde xa pede sa tag ulan po pang summer lang
Hats off bhai👏🏻🤘🏻
I love how some parts move to complete themselves! haha great job!
parabéns amigo!!!! você é um gênio!!!!!
U have really cool ideas and great editing. That being said man when stick welding tack them then run a beed. Circles, back n forth, up n down, straight, not touch then not touch then not gotta run those sticks down to the numbers man
Please Mujhe prize btane ki kasht kare.mujhe bhut pasand aaya.
ha ha ha ha very well I loved the scuter greetings from my channel and from my country Chile
Ive gover board wheels does the motor inside have to be recoiled with copper wire or can i. Just use
U can use same motor without rewinding
You are really working hard man🙌🙌🔥🔥
Good job!
But i worry about that safety problem...
And to slowly maximum speed...
strong Build for less power bike!!, I felt...I think you can convert this to powerful e-bike with little modification...:)
Suspensions are awesome thanks
Oosmm hai bro
Wait a moment. I just noticed something. Did you build your own welders hammer from scrap?? Just another bonus "nice work" for that as well as all the actual projects as subjects of your videos
Hi brother can u make & giv me one lik tis wil pay u.
great work man, but for batteries you may use same brand/model of 18650 batteries, its not safe to used different models or brand it may cause fire upon charging all together. be safe everyone.
It seems like, good accuracy and very systematic.. keep it up !
Pas mal 👍
Good design and built. Thanks for share.
amazing subject matter! amazing skill!! beautifully videoed!!!
Brilliant editing and execution - nice work :)
Nice job, when I saw the title I was expecting a very basic build but you really went all out. How fast could the thing go when you were done and what was your range?
He has it floored now . Not fast , I bet the bats are already dead . But awsome build , with better batteries I'm sure it would go faster , last longer . This guys good
Bohot khub bhai
Truly awesome! Big respect.
it reminds me of Italia Jet Scooter Design, Nice One!
Perfect video bro 👍🎈
Now turn a regular electric scooter into a hover board.
Why they shit, that's why he converted to scooter 😂😂😂😂
كلش حلو
Simón carnalito ósea Simona La Cacaruza....
Magnificent innovation....
Awesome... Great job bro
Such a satisfying video...
Awesome video, good editing skills n big respect for your creative building of the scooter..maybe bigger wheels would really make it suitable for serious off road machine with a bit more torque.
bigger wheels would actually decrease the acceleration/torque but would increase the top speed.
Ótimo trabalho
Ótimo vídeo
Valeu
Wow !
Where I can buy those Suspension?
From bicycle shop
Nice idea bro good work new frnd her
Nice bro
great job, how much km/h in speed ??
Around 25KMPH.
Are you planning to build this?
that's awesome.. you are a truly ingineer
Lay bhari . Good job
Muito bom garoto amei a sua ideia parabéns receba meu joia e minha inscrição no seu canal beleza, Manaus AM Brasil.
How fast can it go bro?
great work with the suspension, totally understandable the power, the fact it's from hoverboard. the plywood would not be a good base material, and you could've cover the wirings & spray painted the pieces after weld.
Молодец. Супер
Did you test the 18650's for the capacity before building the pack
He probably hasn't.
Yes i did
Great job man! question: did you connect one throttle to both controller or how you made that?
Yes
They already got throttle otherwise Ballance board would throw you off starting on full throttle lol
Good job, amazing scooter
Nice💪🏻🙏🏻👍🏻😀👆🏻👏🏻👏🏻👏🏻
Excellent idea, but if you add better light music, the welding sound is annoying
this could be one of the best videos on youtube and YOU have that to say? sorry after writing this realized you were joking
Please make a DIY garbage truck to clean up india in your next video. Lol 😆
👍😁 Спасибо! Какой вес скутера, какая дальность пробега?
Mailage and max speed ??
Nice work, but maybe top heavy for 2x350w motors? What is the max speed?
Omg ! I love your videos . I just wished I had your set-up , equipment - cause I’m hurting to build something
Good fabrication skills bro. Bigger tyre matches.
This was amazing to watch!
I want to ask, I've made the same one, but when the gas/ throttle is fully opened, the voltage drops down until to 32 volt...finally lvc / turns off, I've changed the controller, replaced the bms and the case still same, what's wrong ? please help me... is there a possible cell battery that is damaged? whereas before being assembled 18650 everything was checked at 4.1 volts. thanks,,,
Check the bms amps of your battery and howmuch motor draw
Super work
Thanks again
มันสวยงาม..ดี..Fc..2020..
Hi there I’ve just watched your video, I am doing the same thing for my school project, would you be kind enough to post a video with how and where the electronic wires are connected? Thank you.
Great work but it must weigh a ton (scrap bike frmae would be ideal and so much lighter) and I'm always amazed by how people don't work on the braking power !
This is unexpectedly high quality project and video.
I mean come on, whenever you see a DIY video from India it's always some stupid dude just randomly welding some shit together like he will never have to disassemble it and also filming it all on 2007 phone.
But this one is the opposite.
Great job
BIEENNN GOOOoood
why not merge both motor on one controller??
Bro...
Suuper..💪😍👍..
Can we use this hub motor as generator??? And if yes than what is voltage of motor on 5 km/h speed???
*Hand made 👍*
I watch whole video to see that girl show in thumbnail but whare she is😂😂
мне одному хочется плакать?
Isn't that the dude who built johnny 5 ?
I have one problem with this and it's major I definitely agree with reusing battery cells but using cells of all different brands capacity and use this is very dangerous this is how 18650 cells are always exploding this man is very creative but needs to learn way more about battery safety and electronics in general
All cells are tested and then used they all are of same capacity
nice , man !
Kidktm urooiskp bokrldmdu