BMW F10 N55 Aluminum Charge Pipe Install
HTML-код
- Опубликовано: 21 сен 2024
- Another tutorial video! Welcome new viewers, I hope you find this video helpful!
Parts in this Video:
VRSF Charge Pipe Upgrade Kit -
www.vr-speed.c...
Our Online Store -
eastcoastgaragellc.com
Be sure to follow the ECG crew on Instagram as we will be posting sneak peeks for upcoming videos and giveaways.
Instagrams:
ecg.usa
ecg.jaden
carter.tiezzi
I DO NOT OWN THE RIGHTS TO THE MUSIC IN THIS VIDEO
Music:
Lane 8 - Sunday Song
• Lane 8 - Sunday Song
Thank you for such a well detailed video. I'm looking to do this on ny 640i and your video is by far the best
Upgraded the charge pipe on my '17 F15. I feel its a good upgrade mostly for increased reliabilty more than anything
Thank you for the well-detailed video.
I watched it a couple of times and I replaced it in under 30 minutes on my BMW X5 E70 with N55.
So glad we were able to help!
One of the better, cleaner installs I’ve seen.
Great job guys!
Can I use OEM c clip
YOU GUYS ARE GREAT.
Thank you so much for the support!!
New subscriber, thanks for the video. Best explanation so far! Thanks again
Thanks for the sub! I'm glad we are able to help. New videos soon!!
Yoooo fireee can you do a how it sounds after video ! I’m about to order the same one for my f10 !! I already have a downpipe a intake and muffler delete
MR. CM it sounds pretty insane the videos in the snow are some after sounds it sounds pretty amazing definitely will give you more whistle!
Now whatchu wanna do 😂
Thanks for the vid homie
Followed this, thanks!
What about the lower charge pipe? You are replace like 35% of the total charge pipe
So we’re connecting aluminum to plastic? The aluminum charge pipe does ny connect all the way to the intercooler ?
Got a Evolution Racewerks Charge Pipe, I’m guessing it’s pretty much the same procedure?
Also nice song choice with Lane 8!
Yes should be quite an identical process
Get rid of the top of the square filter box and filter and get the blue Burger cold air intake filter for $180.
Thank you for the video. It has helped me a lot.. I have a 2016 BMW 535i Xdrive and tried to install VRSF charge pipe, however having difficulty in pushing the charge pipe on to the intake. I have it almost like you have in your video 9:52. How much force did you have to put to have it go all the way on intake ?
Sorry I never saw this post. But it takes a lot of force to get it on im sure you learned
I have an e70 x5 and I had to climb on top of the engine to really force it in.
I just installed mine from RvgPerformance. And the part where the pipe connects to the throttle body is where I struggled. I thought I had it all the way in. I started driving and then heard a buzzing noise, and sure enough it came out. Maybe I didn’t force it in hard enough?
Did u figure it out mine keeps comin out
@@hypefosure235 Yes, you gotta push it all the way in. Mine wasn’t in all the way. It’s not easy but you gotta use force.
Hi I just ran into a problem I broke the vacuum line plastic trying to put it back on 😮💨 I’m been looking for the hose or vacuum line online but I can’t find do you know where can I get this part?
I am not sure honestly but if you check realoem.com you can search for all the components. They will usually be named something ridiculous but if you use key words to describe what the part does you should be able to find the assembly diagram that points out the specific component. I do know BMW does not call this a charge pipe so don’t even bother trying to search that. Once you locate the part number check google and then eBay to locate the part
What is the part number for the vacuum line?? curious mine faded away
What u do with the metal atatchement and the gap u unstalled at the begining??
Hey guys, just put my VRSF cp on my 2015 f10 N55, followed your directions, all went well, but for some reason I can’t get the cp up tight onto the engine enough for the c clamp to catch the groove, any suggestions? Did you have that problem?
what did u end up doing to solve it? i’m having same problem right now
I ended up rubbing some oil lube all around the area, then just wiggled the cp back and forth while using as much force as possible. Keep the c clamp mostly on so you can just pop it down when you get it. It works, good luck!
One last question when you added the charge pipe did you have a downpipe already ? And a muffler delete ??
MR. CM I have a muffler delete but no downpipe yet. Putting the downpipe in next week video will be out in a few
Hi, i have the same problem with evolution racewerks charge pipe F10 N55…..¿did you solve it ?
What do you mean by problem?
I ordered the chargepipe but they didn’t include the gasket in my box, only the screws. Would this be a problem? Or should I contact them to send me the gasket?
Same problem here
Mine won't go on. It won't go past the o-ring. Any suggestions of getting more leverage to push?
Get the right angle and push with a passion. There is no right technique besides using both hands and standing near the driver tire pulling the charge pipe onto the throttle body
Can I use OEM c clip ?
Did you notice any increased power ?
Charge pipe is not a power mod. Its a realibility mod
Boost is more Audible..
what is with the second part of the chargepipe go to the intercooler?
Wdym?
Sko buffs
What size are those tbolt clamps on the charge pipe?
Same for a F15 X5 35i?
Not positive but definitely similar process for sure
Its far less complicates because you have more room to work in the F15. Did mine last week
If you are not adding boost do you need this?
Not necessarily however with time plastic is knows to become fragile and break easily. It’s a $200 fix that would save your engine in the long term
Do you have a bov on yours ?
Nope stock diverter valve
@@EastCoastGarage cuz I installed mine on the same car and It doesn’t whistle like yours at least I don’t think, maybe because I haven’t heard it on the outside like how you recorded at the end
@@KyleAdam21Ballardwhyte yeah being outside you hear much more. But also don’t forget the interocoler and charge pipe ramps up the air flow. It’s only gotten louder since DV+, tune, and air intake
U let us hear it with the plastic pipe and not the metal one smh
Wach 172 sorry mic was off when we got an engine bay recording of the pipe. Thought we made up for it with the revs in the clips both in the begging and end of the video. You can clearly hear the wooshing from the turbo.
Yooo Factssss I’m trynna hear that Better ! I just ordered my charge pipe !