At 1:22 you set the disinfection time to 1AM. Please note that during night hours the air temp outside is colder than during the day. So you will save electric energy if you move the tank disinfection time to 2PM when it is warmer outside as difference between source temperature and tank temperature matters in energy consumption, try it out.
it will act like a boiler and supply maximum flow temp until room temp is satisfied if you are in HEAT mode. If in A1 mode it will use the outdoor temp as a guide to heating the water in the heating system,This will vary depending on th ecurve slope you set and the outdoor temp.
Anyone know what voltage I should be getting at the controller? It's labeled as 12v on the back of the controller, but I'm getting 24v. Having problems with all the controllers I've tried and wondering if voltage is the reason. ODU: LG Multi V S. IDU: ARNU363NJA4.
Great video Thansk for the description. The setting lassword is the same for all? if I want to lower the minimum temperature during cooling, which is 15 degrees, is it possible? Ex 10/13 ??
@@tiawarrior11 when you in the menu circle and see settings circle you'll see the version number in bottom left hand corner of screen. Eg. 305.1 so password here is 3 0 5 1 etc etc
Great video, had mine installed a few days ago. I find it kinda weird that you can not select the room temperature by 0.5 demicals. Has anyone figured out how auto/ai works? The +1, +2 , etc is from what temperature?
The A1 works by using outdoor temp heat curve.. The +1 +2 or -1 -2 will bend or pivot the curve by a couple of degC so it will provide hotter or cooler water to the system.
@@MikeTeahan Hi Michael are you able to set my system up onto a memory card for me. I'm on the Algarve & they can't get the hang of the panels. Happy to pay to get it right - Bob
![DDG & G Herbo - Nosey [Official Video]](http://i.ytimg.com/vi/I9Ra0Zc2NlQ/mqdefault.jpg)
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
At 1:22 you set the disinfection time to 1AM. Please note that during night hours the air temp outside is colder than during the day. So you will save electric energy if you move the tank disinfection time to 2PM when it is warmer outside as difference between source temperature and tank temperature matters in energy consumption, try it out.
No hot water schedule set up then?
If you select air temperature control. At what temperature does the heat pump heat the heating water?
it will act like a boiler and supply maximum flow temp until room temp is satisfied if you are in HEAT mode. If in A1 mode it will use the outdoor temp as a guide to heating the water in the heating system,This will vary depending on th ecurve slope you set and the outdoor temp.
Anyone know what voltage I should be getting at the controller? It's labeled as 12v on the back of the controller, but I'm getting 24v. Having problems with all the controllers I've tried and wondering if voltage is the reason. ODU: LG Multi V S. IDU: ARNU363NJA4.
I fitted my second R32 yesterday and could not get my head around the controller... This video has made my day thanks.
No problem Glad it helped..
What is the consumption?
How do I turn off my water and still have heating?
LWT 20°C - 55°C it's to high!
hi, i can't find an actual "how to install a PREMTA000" to my mini split, should be easy, can you help?
If you set custom lwt, how would you figure what temperatures to use ?
Great video
Thansk for the description.
The setting lassword is the same for all?
if I want to lower the minimum temperature during cooling, which is 15 degrees, is it possible? Ex 10/13 ??
NO password is the same as the software version number.
Wich Numbers in the year 2018/2019 sw?
@@tiawarrior11 when you in the menu circle and see settings circle you'll see the version number in bottom left hand corner of screen. Eg. 305.1 so password here is 3 0 5 1 etc etc
Great video, had mine installed a few days ago. I find it kinda weird that you can not select the room temperature by 0.5 demicals.
Has anyone figured out how auto/ai works? The +1, +2 , etc is from what temperature?
The A1 works by using outdoor temp heat curve.. The +1 +2 or -1 -2 will bend or pivot the curve by a couple of degC so it will provide hotter or cooler water to the system.
What is the consumption?
@@MikeTeahan Hi Michael are you able to set my system up onto a memory card for me. I'm on the Algarve & they can't get the hang of the panels. Happy to pay to get it right - Bob