They operate the same, please note 1. the original Xbox controller must be used 2. the controller must be powered off (either by dialing out the batteries or powering down the controller in the XBOX options) 3. the cable from the controller to the steering wheel needs to have data transfer capability 4. connect the USB cable of the steering wheel to the Xbox, the steering wheel will light up red and the controller will light up white, at this point, click the MODE button on the steering wheel, the boot is complete
When I connect the steering wheel the red light comes on but it goes off immediately, it only comes on if I hold down the mode button but it doesn't connect with the original remote control and it doesn't work, what could it be?
Please try to change the connection cable of the controller, the connection cable must have the function of data transmission. If the problem still persists, please take a video of the problem and send it to the after-sales technical support team, they will solve the problem for you. Support: support@e-pxn.com
Step 1. Power of the original XBOX ONE /XBOX Series X&S controller. Step 2. Connect the original XBOX ONE /XBOX SERIES X&S controller and the boot port on the steering wheel using a Micro USB cable. Step 3. Plug the USB cable from the steering wheel into the XBOX ONE /XBOX SERIES X&S. Step 4. Press the "MODE button on the steering wheel. The red indicator light will remain on after a successful connection. The red indicator light will remain on after a successful connection. Note: that the original Xbox controller must be used, otherwise the boot cannot be completed
Please note 1. the original Xbox controller must be used 2. the controller must be powered off (disable the batteries or power down the controller in XBOX Options) 3. The cable between the controller and the steering wheel needs to be able to transfer data. 4. Connect the USB cable of the steering wheel to the Xbox, the steering wheel will light up red and the controller will light up white, at this time, click the MODE button on the steering wheel, the boot is complete!
Everything works, except it will not register my gas pedal as anything other than the brake pedal. When I bind it, it says it is LT which is what the brake pedal is called
1. Verify that the control is the original controller 2. whether the control is connected to the steering wheel in the off state 3. whether the cable has a data function 4. After the steering wheel lights up red, press and hold 'HOME' for 3 seconds (red light blinks) to switch to D-input mode.
Thanks brooo
my gas pedal is the break pedal and my break pedal is the gas pedal
Please take a video of the malfunction and send it to the after-sales email address.
Support: support@e-pxn.com
Could you make a video connecting this steering wheel to the Xbox Series S/X with the new controller?
They operate the same, please note
1. the original Xbox controller must be used
2. the controller must be powered off (either by dialing out the batteries or powering down the controller in the XBOX options)
3. the cable from the controller to the steering wheel needs to have data transfer capability
4. connect the USB cable of the steering wheel to the Xbox, the steering wheel will light up red and the controller will light up white, at this point, click the MODE button on the steering wheel, the boot is complete
Why does the light not stay on
Does the conroller have to be wired or wireless?
Please use the original wired controller
My cable won’t fit on my Xbox series s
Please contact the shop where you purchased it and they will resend the XBOX cable!
When I connect the steering wheel the red light comes on but it goes off immediately, it only comes on if I hold down the mode button but it doesn't connect with the original remote control and it doesn't work, what could it be?
I have the same problem have you figured it out yet?
Please try to change the connection cable of the controller, the connection cable must have the function of data transmission.
If the problem still persists, please take a video of the problem and send it to the after-sales technical support team, they will solve the problem for you.
Support: support@e-pxn.com
@@tingcoisini7497it fixed it
the usb provided just simply doesnt fit into the port on my controller
Are you using a PS4/XBOX controller?
I did everything correctly
I been trying to connect it since yesterday but it’s not working on the xbox can anyone help me?
Step 1. Power of the original XBOX ONE /XBOX Series X&S controller.
Step 2. Connect the original XBOX ONE /XBOX SERIES X&S controller and the boot port on the steering wheel using a Micro USB cable.
Step 3. Plug the USB cable from the steering wheel into the XBOX ONE /XBOX SERIES X&S.
Step 4. Press the "MODE button on the steering wheel. The red indicator light will remain on after a successful connection.
The red indicator light will remain on after a successful connection.
Note: that the original Xbox controller must be used, otherwise the boot cannot be completed
My double tap function thing y oh did doesn’t work can you help me out?
The button in that position?
I pressed home mode and tried to see if stuff worked and it didn’t
Please note
1. the original Xbox controller must be used
2. the controller must be powered off (disable the batteries or power down the controller in XBOX Options)
3. The cable between the controller and the steering wheel needs to be able to transfer data.
4. Connect the USB cable of the steering wheel to the Xbox, the steering wheel will light up red and the controller will light up white, at this time, click the MODE button on the steering wheel, the boot is complete!
Hey how do i get the headphone jack to work
V900 does not support connecting a headset, please connect the headset to the Xbox console
@tingcoisini7497 how do i do that? Cause i aint got wireless headphones
Everything works, except it will not register my gas pedal as anything other than the brake pedal. When I bind it, it says it is LT which is what the brake pedal is called
No entiendo su problema, por favor, grabe un vídeo del problema y envíelo al equipo técnico de postventa：support@e-pxn.com
I only have a red light all the time how can i get it to green
The V900 is red when the connection is complete and won't turn green
Do I understand correctly that the console detects the steering wheel as a regular controller or as a steering wheel?
On the host side is the controller mode
Will this work with xbox one x
sure
I conencted it to my xbox one and everything is working but not the steering wheel what can i do?
1. Verify that the control is the original controller
2. whether the control is connected to the steering wheel in the off state
3. whether the cable has a data function
4. After the steering wheel lights up red, press and hold 'HOME' for 3 seconds (red light blinks) to switch to D-input mode.
but what if I don’t have the original controller anymore
It won’t work?
You must use the original Xbox controller or you will not be able to steer the wheel properly, there will be disconnections and failures to connect
Dose this work on a Ferrari wheel
no
Will this work with xbox series x
yes
Can i control by joystick and steering wheel in the same time
sure
is it compatible with xbox series?
sure
Thanks is Russia!