Having trouble activating the outputs on these things. Tried every which way via dip switch settings. Panel is set to slave config with outputs 4 and 5 set. I do not have any red light though on my outputs. Ugh!
OK READ THE MANUAL: IT SAYS YOU CAN DO THIS EVEN SHOWS A WIRING DIAGRAM SHOWING THIS 2.8.2 Daisy-chaining Multiple Units The number of power supplies which can be daisy-chained is limited by the line resistance and current draw limitations of the upstream module or NAC output circuit. Refer to the module, power supply, or fire alarm control panel manual to confirm these circuit specifications. Maintain separation of power-limited and non-power-limited wiring as shown in Figure 2.6. Figure 2.13 shows the controlling signal connected to Input 1 of HPF-PS1. However, typically any available Input of HPF-PS1 can be used.
Broooo! How did UL let that slide!? That's pretty freakin serious.. You'd figure FL would jump on the digital bandwagon (intelligent ps) but they like to keep it OG..
Having trouble activating the outputs on these things. Tried every which way via dip switch settings. Panel is set to slave config with outputs 4 and 5 set. I do not have any red light though on my outputs. Ugh!
ive had the same issue!
Same problem.
Why aren't you setting the dip switches to use those outputs for constant 24v power? Can be either resettable or non-resettable.
I've just been putting the in and the out under the input terminal works perfect
Can you elaborate more on this?
Great info. Thanks. Do you have any detailed introduction videos for PS-6 & PS-10 power supplies?
Thats the way these new nac panels are designed. Read the manuals for them, cant wire them the way we could for the FCPS-24fs8's&6's
OK READ THE MANUAL: IT SAYS YOU CAN DO THIS EVEN SHOWS A WIRING DIAGRAM SHOWING THIS
2.8.2 Daisy-chaining Multiple Units
The number of power supplies which can be daisy-chained is limited by the line resistance and current draw limitations of the upstream module or NAC output circuit. Refer to the module, power supply, or fire alarm control panel manual to confirm these circuit specifications.
Maintain separation of power-limited and non-power-limited wiring as shown in Figure 2.6.
Figure 2.13 shows the controlling signal connected to Input 1 of HPF-PS1. However, typically any available Input of HPF-PS1 can be used.
Is there a sequence to change dip switches?
Quick question. I have this panel and can’t get a trouble to show. I have power and the main SLC is tied in. Any tips or suggestions would be great
Broooo! How did UL let that slide!? That's pretty freakin serious.. You'd figure FL would jump on the digital bandwagon (intelligent ps) but they like to keep it OG..
Because if you read the manual it shows that you should be using an output to trigger the next Power Supply not the terminals for EOL.
Unrelated question - solid or stranded THHN?
How do you make the nacs sync off the control relay? On ps6
Your moving the camera so fast I can't even get a chance to see what uyou actually talking about . Try to slow the movement of the camera