The passion and love for the sport that you and your crew have is inspiring. I look up to all of you every day, keep doing what you do best and lay those gaps!
Thanks again for the "honest" video Chris, Losses 😟 AND THE *WINS* 👍😁👍 no practices for weeks , so I'd say that was a BLOODY GOOD performance. MooreMafia action #1
Bien hecho Mi Campeon. Can you please do a video on the drag racing class or clinic explaining exactly what takes place and whats included. Thanks Brother.
Black Mamba cookin!Chris, you should put some active front carbon winglets on black mamba. Fabricate a platform for the actuators to the front frame of the bike. Tune the actuators to change pitch of winglets based on speed or front wheel height. MAXX ecu can setup something for that.The whole setup would weigh no more than 5lbs and the added downforce of the winglets will allow you to go FULL SEND and be the first to get to 6.0s!
@@daveyt4802 yes. The bike makes so much power that it wont affect mph since they’ll be able to add boost with the added downforce. Would be great for Chris and for the channel to be the first to do it on a Pro Street
When you were saying the rotary engines are two stroke did you just mean the race build is setup that way since it’s on alcohol and they pre mix fuel to get adequate upper cylinder lubrication and such? Just curious because a production rotary engine like a Wankel is still considered a 4 stage/cycle if you want to call it that. In a way the engines are a hybrid of sorts because yes they don’t have camshafts or valves but they do have a chain driven oil pump and don’t require premix.
Hi Chris just want to ask a quick question I have a 2015 gsxr 1000 it's got a full race fit system but isn't tuned iv seen on ur channel uv tuned one of these and it was only around 160hp yet the older k7 seemed to make around 170 what is it with the 15 engine that limits it cheers
When are you coming back up this year? I’d like to have you bus my 14 down with you so you can do the winter project on my bike like we talked about a few weeks ago. If your not coming back i have to figure out how to get it to you. I don’t want ANYONE to know what’s being done to her! This way you have all winter to get it done and test and tune it. Ricky who??? LMAO I want it to mimic your 1000 and then some if we can?
I see ya'll or still at it. I wish I was still in the Ville... Tell Chris Irby and Anthony Johnson Lamont Suber, said what's up. Keep doing your thing Chris.
I know it might hurt your top end a little but I'm sure if you put some winglets in the front, the bike would wheelie much less and allow for you to keep it wot for longer, more than making up for the final loss.
It takes a different type of human being tondo what you do on a bike. I like going fast but you take it to another level man.
Agreed
777
Thanks guys!
The real anti wheelie device is them huge clanking nuts it takes to rip one of these down the track!
I love those ride along camera shots!!!
Sick Wheelee, 1M respect to ya'll. May God keep all ya'll safe in the track🙏
You guys built a complete beast! Love the videos man. Keep up the good work.
you are nuts man. stay safe. that is amazing to watch. Watching you wheelie was making me lean out of my chair.
Chris thanks for all you do. Your videos are the best. Shake & Bake 🥇🚀🚀🚀
I appreciate that!
Best track on the east coast and maybe one of the best in the world! Great job Jason Miller and crew at BUDDS Creek “ MIR”
Chris decided to put on a stunt show
The passion and love for the sport that you and your crew have is inspiring. I look up to all of you every day, keep doing what you do best and lay those gaps!
John Weed tl
Thank you!
Thank you for posting this video off the hook fun .
Ready to see some moments like this with the R1 make it famous
Thanks again for the "honest" video Chris, Losses 😟 AND THE *WINS* 👍😁👍 no practices for weeks , so I'd say that was a BLOODY GOOD performance. MooreMafia action #1
The helmet mic is a good thing. I always talk to myself when I stage. Might as well let somebody else hear what you're saying...
Bien hecho Mi Campeon. Can you please do a video on the drag racing class or clinic explaining exactly what takes place and whats included. Thanks Brother.
This guy content is awesome!! That bike??Dayummm...fast af...
Thank you!
Boy you are really riding that beast. I loved the last run great close run win on a great holeshot.👍👍
You have to get Jeremy this weekend brother, this is your weekend 👍🔥
17:12 the back tire off the ground go in slow mo
Black Mamba cookin!Chris, you should put some active front carbon winglets on black mamba. Fabricate a platform for the actuators to the front frame of the bike. Tune the actuators to change pitch of winglets based on speed or front wheel height. MAXX ecu can setup something for that.The whole setup would weigh no more than 5lbs and the added downforce of the winglets will allow you to go FULL SEND and be the first to get to 6.0s!
No rules this weekend. Should fab some winglets!
@@daveyt4802 yes. The bike makes so much power that it wont affect mph since they’ll be able to add boost with the added downforce. Would be great for Chris and for the channel to be the first to do it on a Pro Street
Maybe a dry clutch too!
17:13 Chris Moore took flight ✈️ 🛩 ...bike completely off the ground 🔥
I have bad ass picture of that on my instagram
Your videos make my day even better!
Thank you!
Chris said let me get that moon tune my boy 🤟
That was friggin AWESOME..
New favourite channel..
Good job mister
Thank you! Welcome to the fam!
Hey
Thanks for the entertainment tonight. New to your channel. Awesome videos. Happy Thanksgiving tomorrow and be safe. :)
Welcome to the fam!
MOORE Mic'd up passes! Some killer content right there!!!! Those MM vs JT, yep, we'll take all the videos angles ya got on those races, WAY COOL!
That is a very cool video Chris ! The live mic is second to none ! Great job.
Thanks!
Yall had the biggest balls on the property all weekend!
Congrats Chris. Great performance !
MOORE MAFIA is a beast
Flight ✈️ school 💪
Shake and bake baby Moore mafia 4life
my new fav channel
Welcome to the party!
Perfect Amazing Fantastic AWESOME
Dude. You sound super calm through the burnout etc....different typa human for sure lol 👍👍
amazing last race against teasly,,,, omg you where moving!!!! 200mph at 6:44et so sick!!!
Awesome pure awesomeness!!! I love it
I really enjoy the video . Also the quality and editing of the video is awesome.
Mrs.MooreMafia FTW on the editing!
@@TeamMooreMafia Ms Moore did very good job and thank you for your hardwork.
Man I love his dude. Bringing my bike straight to him!
Thank you sir!
@@TeamMooreMafia were is your shop at ,i have a 2017 hayabusa and i just want it to run better
Nice going for the ride was OOOwZemmmmmmmm
That bike moves!!!!!!!
Chris made that bike bunny hope 💯. legend
Love the vids man that thing is fast
God bless you brother 🙏 take good care and like always amazing videos 🙌 only the best of the best💯👍👍
Godlike driving.. Stay safe. Thank you for for sharing.
When you were saying the rotary engines are two stroke did you just mean the race build is setup that way since it’s on alcohol and they pre mix fuel to get adequate upper cylinder lubrication and such? Just curious because a production rotary engine like a Wankel is still considered a 4 stage/cycle if you want to call it that. In a way the engines are a hybrid of sorts because yes they don’t have camshafts or valves but they do have a chain driven oil pump and don’t require premix.
You better get your pilot's license before the FAA comes and gives you a ticket LOL
There is a mic for the Gopro, which is great so we can hear u better. Great video
how to control a beast like a god!!!
Being honest the step by step by a pro is definitely intuitive
That wasn’t a wheelie you took both wheels off the ground at one point man that’s wild
Crazy wheelies !
Man that's awesome! Man I really want to bring u my ninja to get it tuned! GIVE IT THE JUICE BABY 🤣
k6 or k8?
I built a GS1000 turbo in the early 80s, stock wheelbase 10.3 @143mph. I thought that was fast but this is a whole different planet!....Galaxy!!!! 👍💥😀
I can't believe how fast they have gotten from where they were 5 years ago!
@@TeamMooreMafia I'm lovin' the content Chris and your good natured 'grudge' with Rickey 👌👍
These new bikes cost in the range of $45 grand though.
I remember running 7:90's in the 80's thinking I was fast. 🤣🤣😂.
New video is about to GO LIVE!!!
*28K+* views 😄👍 you must be doing something right here Chris ......
Yes sir! People like to see me on the edge of death. 😆 🤣
@@TeamMooreMafia *MooreMafiaNation* is taking over the internet
👍😄👍 keep the content coming Chris *#1* ...
That's nice boble head you got on the dash of the motorhome...lol
Haha, thanks
How do you balance race life, personal life, and work life? How do you squeeze in time to start an finish your projects etc...
Eat, sleep and breathe racing. Luckily my family knows we grind during the busy months and "relax" in the winter
@@TeamMooreMafia bet it up... thanks for the reply💪🏿
Chris how many horse power does this bike put out wow 👌
Clitus had those top rotor builders on his videos. They sound like angry bumble bees
Hey chris what's your thoughts if you're going to build a cbr 1000rr-r like your gsxr 1000 I'm a fan ot the channel and cbr 1000rr-r from philippines.
I'm a suzuki fan, but you can do some killer things with the cbr
Damnit that dog is the cutest
Great content 👍🏼👍🏼👍🏼
I tryed to get in on the GSXR giveaway and couldnt get on your website !
Hi Chris just want to ask a quick question I have a 2015 gsxr 1000 it's got a full race fit system but isn't tuned iv seen on ur channel uv tuned one of these and it was only around 160hp yet the older k7 seemed to make around 170 what is it with the 15 engine that limits it cheers
Very nice indeed.
When are you coming back up this year? I’d like to have you bus my 14 down with you so you can do the winter project on my bike like we talked about a few weeks ago. If your not coming back i have to figure out how to get it to you. I don’t want ANYONE to know what’s being done to her! This way you have all winter to get it done and test and tune it. Ricky who??? LMAO I want it to mimic your 1000 and then some if we can?
We will not be headed back north this year.
Beast mode 😱
Chris how do you, or what do you, do to handle those tank slappers when coming down from a wheelie? That last pass was sick
Dont lift and they straighten out atleast it works for me
Mr mafia t-shirt looks dope
Some say wheelie, others say extreme weight transfer. Either way it's insane physics at work!
🥇 you have to be a natural badass to make this happen 💪🏽💯 🗳 🥇
Jesis Christ man those wheelies are insane
I don't know alot of dragracing classes, but is there no possibility to ride with some kind of electronic wheelie control?
You can, I just don't like riding with it because it can slow it down.
Love the dogs.......
Lol the okie doke tune..”Hang on”
I see ya'll or still at it. I wish I was still in the Ville... Tell Chris Irby and Anthony Johnson Lamont Suber, said what's up. Keep doing your thing Chris.
I still talk to both of them pretty often!
@@TeamMooreMafia Tell them I said what's up. And you stay safe on that track
Flying 😮😮
Ralphie!!! 😃👍👍👍
@17:12 it comes of the ground!! LOL!!
17:06 Wheelie + jump ^^
Shake n bake baby
🤘
Thats my favorite bike
You the man!
Good luck 👍 BIKER FOR LIVE
I see Ol Ricky got some help getting his bike ready
He finally got it ready because he knows the race isn’t till next year! 😂.
How about a chriss moore Rotary car for the next project?
It would be soooo fun!!
That sucker Mazda rx8 at the start is a super fast car seen it hit 6.84 before in person
It is a super fun car to watch
You said it "big big willy" that's what you need, more weight up front. Lol. Willy mode on
Those giant wheelies are crazy i would sh*t myself
Hey can you mount a camera Behind you so we can see how fast you leave everyone?
I have a go pro 360 i need to put back there
wow
NICE!!!!!!!
That bike is absolutely nuts 🤙 I love it .... hit up Maxy (used to be maxwrist gold) on RUclips he needs his aprilia tuono tuned its be a dope vid
Is there any suspension on these motorcycles
I hear it's no rules, run what ya brung. DME did a 231 mph pass. Should have raced the Tesla! Nice job Chris! 233 mph! wOOt!
I know it might hurt your top end a little but I'm sure if you put some winglets in the front, the bike would wheelie much less and allow for you to keep it wot for longer, more than making up for the final loss.
Its definitely a fine balance..
@@TeamMooreMafia I'm just thinking out loud, you guys know your stuff. Great riding btw.
Ricky take notes 📝 son 🤔💪