Laser Cut for Orphaned Tool Kit | A new home thanks xTool P2 CO2 laser machine
HTML-код
- Опубликовано: 19 июн 2024
- #xTool #foam #lasercutter
Patreon: / notterriblere. .
Instagram: / ntrprojects
Facebook: / ntrprojects
Hello everyone,
in this video I take care of a toolbox that I bought second-hand some time ago. The tool helps me in my daily work in the workshop, but has not yet made it into a video. The reason is that the inlay of the case is broken and the tools are scattered wildly in the case. Some tools are not even part of the set and have no permanent place in the toolbox, other tools from the set have been missing for years. I can't replace the missing tools and am happy to have the tools that don't really belong in the box. So to make it fully functional, I need to replace the old plastic inlay with a foam inlay.
This is also the perfect moment to test my new tool, the Makeblock xTool P2, a 55W CO2 laser cutter and engraver. xTool gave me the tool for free and asked me to test it. I can use the tool very well and will use it again and again when needed and report how I get on with it. A link to the provider's online shop can be found below.
In the video I do the Laser Setup and show you how to put the Makeblock xTool P2 into operation.
I then test laser cutting EVA foam and laser cutting PE foam.
With the cut foams, I can put together a new inlay that fits my tools perfectly. I am thrilled with the cutting quality of the machine.
Even though the toolbox is now no longer original, it is once again in top condition for daily use and thus for my needs.
As a beer, I finish by testing a "Paulaner Münchener hell".
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via
Paypal: paypal.me/NTRBeer
Patreon: / notterriblere. .
and follow me on Instagram and Facebook / ntrprojects / ntrprojects
Here are the links to the tools and equipment I use:
xTool P2 Laser Cutter/ Engraver: ➡️ www.xtool.com/?ref=a33AnTM6OT...
IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
Powder Coating Gun: ➡️amzn.to/3XEnXhk
Laser Pecker 2 Engraver https: ➡️amzn.to/3EhzLza
Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh
Sandblasting Cabinet 420 Liter: ➡️amzn.to/3S62o89
350 Liter ➡️amzn.to/3IyPj3V
220 Liter ➡️ amzn.to/3IzYMYE
Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
Stay healthy Dr Beer
Music: Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
00:00 - Intro
00:32 - Chapter 1: New Tool
01:38 - Chapter 2: Laser Setup
04:12 - Chapter 3: The Design
04:54 - Chapter 4: Production
07:47 - Chapter 5: Timeout/ Beer Tasting
08:51 - Chapter 6: Assembly 
Хобби
![RUSTY Tricycle Restoration [60's German "PUKY"-Brand Tricycle]](http://i.ytimg.com/vi/PniO4uOIyRs/mqdefault.jpg)
![RUSTY Tricycle Restoration [60's German "PUKY"-Brand Tricycle]](/img/tr.png)
Your workshop is getting better everytime I see it
What a great "quality of life" upgrade!
Super as always! It's a pity you didn't restore the metal box too. That would've been awesome.
No to War !!!! #4 beer I will look for it. No to war !!!!
Excellent!
Many thanks!
Noice!!!! Rio de Janeiro - 🇧🇷
Das hat er wieder fein gemacht 👍
Congratulations on your new tool, my friend! 👍
That was nicely done, all the way around. This is the 2nd time I've seen this laser cutter used and it seems awesome. I love what you did with it here and can't wait to see what you do in the future. Your videography is so clear & precise, your storytelling is spot on and your stop motion is over the top great. Danke, Dr. B for a very enjoyable visit with you in your wonderful shop.
Thank you very much!
Nicely done I need something like this in my tool box drawer. ...
Very nice! That tool will come in handy!
Excellent introduction to laser cutting. One tip, always keep you cut-outs to hand which can be used as padding to avoid extra trimming and keep everything level.
New toy,alright! 😀👍🇺🇸
Paulaner, my favorite brewery in the entire world. Try the Salvatore. You will not be disappointed.
Nice work, but i would have made the screw / driver bits stand vertically and slot in like your sockets do..
I can imagine that gluing the layers together was the most difficult part of the job. You converted an old box into something nicely functional. Like you I'm a firm believer in a place for everything and everything in it's place.
I bet that made you proud of yourself! 👍🇺🇸😀
Brilliant, I always love the beer break it seems just as you are pouring a beer I'm drinking one, today I'm having gut rot cider. You need to sort out the tool box now.
Great new toy...stay safe captjack
Excellent project. Lookinf forward to the next video. 👍👍
Epic stuff!!!
Well done!!
Very nice design.
Well organized, well done… suds & all👍
Woowwwww!!!
Muchas felicidades!!
Una herramienta increíble para hacer más fácil el trabajo!!
Saludos desde México😊
I have a socket set with exactly the same issue as yours had but unfortunately I don't have a laser cutter. That is a very nice device and watching you make use of it is very satisfying. I hope to see more of your creations. Great video.
that is very nice thanks
Olympic level OCD, I love it.
Hey great video. Me and my 3yo loved it. I like how you kept the enamel. Keep it up man.
Great job, as usual! :)
But I think would be better to add a thin layer of foam to the inside of the top cover. Just to keep tools more stable, while carrying the box
Good idea
Looks excellent! I wonder if you could use a small foam roller to apply the glue quicker and more consistently. Hardest part would probably be coating the roller :)
Eigentlich gehört so ein Laser-Cutter in jeden Haushalt.
So eine sauber aufgeräumte Toolbox hat schon was!
Gruß Tino
PS: Habe leider nicht das nötige Kleingeld und auch keinen Platz, aber geil ist der Cutter auf alle Fälle.
Da hast du recht Tino 😂
Well done. I looks very nice
Nice
Nice looking result. The laser-cutter is interesting, too.
Wait to see cuts in other materials.
First, amazing job! Very cool what lasers can let us do at home. I have a similar box, the plastic dissolved years ago. I need to keep a sticker on it to help remind an old man like me which side is the top! 😮
That looks like the same box I have. I tossed the clear plastic insert a few years ago. It wasn't good. Now I just need one of those cutters. 😉
As a bigtime admirer of all tools and gadgets, this one is so cool! But understanding how it all fits together would be too large a learning curve for me😳
I always enjoy your channel and wish you would give us a source for those beers. The München Hell sounds just the ticket to me, since I prefer less hoppy beers. My favorites are actually stouts, which I haven't seen you review (might have missed it, or maybe Germany doesn't have stouts?"
What a awesome Tool. You did a fantastic job on your tool box insert. Everyone needs one of the Laser printers in their home. 😊
Thanks for sharing. I really enjoyed watching you work. Looking forward to seeing more videos from you.
Cheers 🍺
Good job mister well done
New machine day! 🎉
Seems like it might have been useful to use a foam roller for the glue. I don’t know if that’s an acceptable way to apply it.
And using some locating pins to ensure the layers are set correctly might make assembly of the layers easier if you do a project like this again.
And using weights spread over the surface might make it easier to ensure a good contact when you assemble the glued layers and make it lie flatter?
Paulaner is by far my favorite brand
Very cool! I’m sure you’ll find many uses for the tool!
Wow… I’d be over the moon if someone sent me a $5,000 machine to test out!!
I did a substantially similar thing with craft foam and an exacto knife a few years ago. Yours is WAY cleaner, and you can more easily iterate on the design as needed.
Very cool project. Certainly tell it's in its early stages, but I'm sure there are so many fun things to make!
Insert levels are fab dude 👏👏👏. How did you manage to convince yourself to leave that loose clip alone? 😂😂😂😎
half expected to hear at the end the sound of a bunch of tools dropping and then "scheisse!"
looks very good, I wish I had one of those laser cutters, it would probably make some of my projects much neater. I'm just wondering about the little driver bits and how well they will stay in their places when you carry it around by the handle. they don't look that tightly held in.
Yeah, I'm jealous. I said it. 😁
Very nice work
I'm curious is the laser head able to cut angles, or only straight down?
I think that all of the lasers at this level can only cut straight down.
Correct it only cuts straight down
Deberías haber restaurado la caja también🤷♂️
That was great! I’m curious how long that took you? You made it look easier probably than it actually was. Good to see a post from you.
Getting familiar with the software was time consuming, but to make the different layers and adjust them to each other was a bit painful and took many hours
I. think I have two or three of those boxes somewhere in the basement ... I like what you did with the laser but I'm not a fan of crummy old tools that are about as precise as the €4,99 tools you get at Aldi or Lidl
Te compraste una herramienta láser de ultima tecnología y le desarmaste algunas partes??? 😳 No entendí eso! Espero ver que que hagas muchas cosas buenas con esa nueva maquina láser. Gracias por el vídeo amigo barbado! Saludos!
No it comes not with the cooling liquid inside, and that's what I had to add before using it
@@NTRprojects Ok. Gracias!
Would it have been easier to first spread the glue on a layer and then remove the cutouts? Or is there a reason why that would not have been a good idea?
I tried that, but glue was spinning fine lines all over the place
Ahh, the future.
I did EXACTLY the same thing for my Gedore spanner set (Albeit with a much cheaper laser). The big difference though was that I used gym mats as the material, I just could not get a good source of foam: May I ask where did you source that foam from?
Geiles Tool :D Funktioniert das auch für metal und holz?
Holz laut hersteller bis zu 20mm, Metal und glas aber nur gravieren
@@NTRprojects 20mm ist ziemlich viel. Ich wollte sagen, gut um Möbel herzustellen aber das ist natürlich lächerlich, oder vielleicht um Ornamente zu machen und auf zb Türe zu kleben usw.
Anche mio papà aveva una cassetta di utensili come quella ed io gli ho ricostruito la sagoma interna in compensato con il seghetto del traforo…. Ai miei tempi non c’era il laser….
Cooles Spielzeug, aber viel mehr arbeit als wenn man das 3d drucken wuerde. Das lutscht mit der Zeit auch aus...
I don't think I could use the software for that machine, it looked like it was in a different language! 😜
bof.....
Lavoro da nerd...