Wow, I know I'm replying to an old video, but I had to say: your final Underneath shot is really beautiful. It looks great, congrats on seeing your hard work come together!
Hey Mike. Great job. I presently have a 74 t-top. It was garage kept since 86 but is in need of some tender loving care. Cant find anyone who is willing to work on it in my area. Sold my 70 convertible, like a fool, back in 72 when I got married. Wish I still had that. Great work on your 72. Tom, Chesterfield, Va.
Great work Mike. I’ve done a body lift of my vette and your video was my reference to do it right. Again, thanks for this awesome video as I’m close to do the body drop on the chassis. Thanks a million
Mike… a very timely video. I’ve got the same lift so I intend to use your experience as my model for my restoration in another month or so. Thanks for taking the time to document.
I’ve got my Westcoast Engines 383 stroker engine mated to my T-10 trans (new seals and gaskets) all new rubber, bearings and brakes in the front end but I’ve still got pressure washing and painting to do on the frame. It’s been so hot in the Houston area for the last month I really haven’t been willing to work on the frame. Once it gets a little cooler I’ll finish up the frame and remount engine/trans and all the drive shafts. I plan on adding side exhaust so I’ll install that before putting the body back on. I’ve also been trying to source all the parts I need to upgrade the a/c since the engine came with a serpentine belt system with a Holley compressor. Still lots to do but at least I didn’t find any surprises with frame corrosion or other serious mechanical problems.
I’m just beginning my odyssey to resto-mod slash update my ‘79. Considering all plumbing, wiring, and suspension squishy bits are all dry rotted I’m thinking a body lift for access will also allow frame inspection and a complete repaint of the ultra oxidized formerly red body.
It has been awhile, but as I recall the left side has the rear brake line and the fuel tank vent. The right side has the fuel supply and fuel return. Hope that helps!
I did have that conversation with the guy who painted it beforehand. He preferred to have it on the frame. There wasn't any overspray, but the frame did get dusty. I was able to wipe all of it off but it took some time.
No, always paint is mounted to the frame and all four tires on the ground. Reason= let the entire body settle plus making certain all body gaps are perfect .
You mentioned in an earlier video that you got the plans for the dolly online somewhere and it worked well, but I can't seem to find those plans. Can you help? I really appreciate it.
I've scanned the dolly plans into a pdf and would be happy to share, but not sure how to attach a file to a video on RUclips. Others have asked me for them, and the request comes to me differently than a standard reply. I simply attach the file to their request and off it goes. Maybe you can figure out how that's done.
@@mikelandwehr-corvette RUclips has changed messaging rather recently and that feature isn't automatically available anymore. You would have to add that feature to your profile. Is there another way that you can think of?
Hi Barrie, I used my car lift to raise the body off the frame. It's a Auto Lift AL2-9K-ACX 9,000 lb. Asymmetric 2 Post Car Lift, which I purchased from Greg Smith Equipment. Good luck with your project!
No video on that topic. I did look it over when the car was completely apart. There was practically no rust at all, so there was nothing that needed work. Thanks for watching. Mike
Looking good, hope Corvette Ben is watching.
Thank you. I'm certainly watching Ben - his videos have provided me with a ton of good info.
That was really cool, man i wish i had you're shop, so much space to work and a hoist.
Wow, I know I'm replying to an old video, but I had to say: your final Underneath shot is really beautiful. It looks great, congrats on seeing your hard work come together!
Hey Mike. Great job. I presently have a 74 t-top. It was garage kept since 86 but is in need of some tender loving care. Cant find anyone who is willing to work on it in my area. Sold my 70 convertible, like a fool, back in 72 when I got married. Wish I still had that. Great work on your 72. Tom, Chesterfield, Va.
Nice done Mike...I brought from Florida a 71 Stingray rust free to Romania and planing to do the same thing thanks to watching you.
Great work Mike. I’ve done a body lift of my vette and your video was my reference to do it right. Again, thanks for this awesome video as I’m close to do the body drop on the chassis. Thanks a million
Thanks for the feedback and good luck with your project!
Thanks for taking the time to make a video pointing out details to pay attention to, Thanks again!!
Mike… a very timely video. I’ve got the same lift so I intend to use your experience as my model for my restoration in another month or so. Thanks for taking the time to document.
So has it going?? The restoration??
I’ve got my Westcoast Engines 383 stroker engine mated to my T-10 trans (new seals and gaskets) all new rubber, bearings and brakes in the front end but I’ve still got pressure washing and painting to do on the frame. It’s been so hot in the Houston area for the last month I really haven’t been willing to work on the frame. Once it gets a little cooler I’ll finish up the frame and remount engine/trans and all the drive shafts. I plan on adding side exhaust so I’ll install that before putting the body back on. I’ve also been trying to source all the parts I need to upgrade the a/c since the engine came with a serpentine belt system with a Holley compressor. Still lots to do but at least I didn’t find any surprises with frame corrosion or other serious mechanical problems.
Great job Mike! :) and everting by yourself
Nice work!
Great job. Really impressive 👍👍
Great video I wish I had the room in my garage for a lift so I could do that to my 73
You are doing a great job.
Nicely done
Great Job... Brother. I'm considering building a '58 Body and Chassis to go with a Date Coded '58 283. Thanks for Sharing
I’m just beginning my odyssey to resto-mod slash update my ‘79. Considering all plumbing, wiring, and suspension squishy bits are all dry rotted I’m thinking a body lift for access will also allow frame inspection and a complete repaint of the ultra oxidized formerly red body.
great job and video
Beautiful
great video
good job!
mike , ive watched a lot of this process, what are the double lines running back on the brakes on the left side?
It has been awhile, but as I recall the left side has the rear brake line and the fuel tank vent. The right side has the fuel supply and fuel return. Hope that helps!
Would it not be a good idea to paint the body while off the freshly restored frame to avoid over spray?
I did have that conversation with the guy who painted it beforehand. He preferred to have it on the frame. There wasn't any overspray, but the frame did get dusty. I was able to wipe all of it off but it took some time.
No, always paint is mounted to the frame and all four tires on the ground.
Reason= let the entire body settle plus making certain all body gaps are perfect .
You mentioned in an earlier video that you got the plans for the dolly online somewhere and it worked well, but I can't seem to find those plans. Can you help? I really appreciate it.
I've scanned the dolly plans into a pdf and would be happy to share, but not sure how to attach a file to a video on RUclips. Others have asked me for them, and the request comes to me differently than a standard reply. I simply attach the file to their request and off it goes. Maybe you can figure out how that's done.
@@mikelandwehr-corvette RUclips has changed messaging rather recently and that feature isn't automatically available anymore. You would have to add that feature to your profile. Is there another way that you can think of?
@@andyshupe7248 shoot me an email at: mike_landwehr@yahoo.com and I'll reply with the plans
@@mikelandwehr-corvette Roger that. Thank you!
@@mikelandwehr-corvette Thank you, sir! Check your email. I sent you something as a thank you.
Hi Mike, what kind of body hoists do you use or recommend?
Hi Barrie, I used my car lift to raise the body off the frame. It's a Auto Lift AL2-9K-ACX 9,000 lb. Asymmetric 2 Post Car Lift, which I purchased from Greg Smith Equipment. Good luck with your project!
@@mikelandwehr-corvette Thank you.
did you inspect the birdcage? if so id there video of it?
No video on that topic. I did look it over when the car was completely apart. There was practically no rust at all, so there was nothing that needed work. Thanks for watching.
Mike
@@mikelandwehr-corvette Thanks Mike, great work.